ADAS coverage
This 2016 Chevrolet Equinox page documents 4 ADAS systems, including Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), Rear Cross Traffic Alert (RCTA), and Rear View Camera.
View ADAS data 3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2016 Chevrolet Equinox Supported Services
2016 Chevrolet Equinox
ADAS calibration, module programming, and security relearns
Trim and driver-assist content varies by package and build. Verify camera, parking, blind-zone, and safety equipment by VIN.
Technical snapshot
- Platform C1XX (2nd Gen, 2010-2017)
- CAN Architecture GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
- Security GM PASS-Key III+ - transponder + RKE 315MHz rolling code
What do you need fixed?
Choose a service to start your quote.
Exact-year service summary for 2016 Chevrolet Equinox
Calibration triggers
Documented calibration triggers include Rear Bumper Repair, BCM Replacement, Any Collision, and BSM Sensor Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 21 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2016 Chevrolet Equinox.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2016 Chevrolet Equinox using the documented systems and module data on this page.
Choose a sectionVIN and build details determine exact service eligibility. A missing record does not mean we cannot help; ask about your vehicle.
YEAR-SPECIFIC NOTES
VIN / Build Split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.
Infotainment
Chevrolet MyLink
Vehicle specifications & technical reference
OVERVIEW
Platform
C1XX (2nd Gen, 2010-2017)
Production
2005-present
Trim Levels
Trim and driver-assist content varies by package and build. Verify camera, parking, blind-zone, and safety equipment by VIN.
Drivetrain
FWD / AWD
CAN Speed
GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
What changes on this exact year
Feature availability
Remote Start - Optional; Heated Seats - Optional
Driver-assist suite
Side Blind Zone Alert (optional 2LT/LTZ); Rear Cross Traffic Alert (optional); no forward camera/radar on 2016 base
VIN and build split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.
Infotainment context
Chevrolet MyLink; Chevrolet MyLink 7" (LT/LTZ); base LS standard AM/FM
Network and access
CAN: GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
GM GDS2 / GM Tech2Win / GM MDI 2
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2016 Chevrolet Equinox. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
8 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
1 module documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
5 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Remote Start
OptionalBCM RPO config on equipped trims.
Heated Seats
OptionalLTZ. BCM configuration.
WHAT WE RESOLVE
Common issues on this vehicle
Common Chevrolet Equinox issues we resolve on this platform: Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), Rear Cross Traffic Alert (RCTA), and Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - C1XX (2nd Gen, 2010-2017) platform uses GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Side Blind Zone Alert (optional 2LT/LTZ); Rear Cross Traffic Alert (optional); no forward camera/radar on 2016 base
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Blind Spot Monitor Sensor - Left (BSM) | Side Radar | Radar | Static + Dynamic | Optional | 23234498 (APPROX - VERIFY GMDB) | |
| Blind Spot Monitor Sensor - Right (BSM) | Side Radar | Radar | Static + Dynamic | Optional | 23234499 (APPROX - VERIFY GMDB) | |
| Rear Cross Traffic Alert (RCTA) | Side Radar | Radar | None | Optional | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Rear Bumper Repair Affected: SBZA Left/Right, RCTA
SBZA radars in rear bumper corners - GDS2 init if disturbed or replaced. Verify SBZA + RCTA at 20+ mph.
BCM Replacement Affected: PASS-Key III+ key database, SBZA enable
SPS programming + full key relearn required. Reconfigure all BCM options via GDS2.
Any Collision Affected: SDM, deployed airbags, SBZA radars
SDM with deployment DTC must be replaced. SBZA radars may be damaged in rear impacts. Full scan before delivery.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using GDS2/MDI2.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS2/MDI2 if applicable.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
SRS - Airbag Modules
Sensing & Diagnostic Module (SDM) 8 records
Under center console
- Part number
- 22973618
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 84213723
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 84213724
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 20827689
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 20827690
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13599654
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13502577
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Under center console
- Part number
- 13574936
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ECU - Engine Computer
ECM - 2.4L LE9 Ecotec 12654154 (APPROX - VERIFY GMDB)
- Part number
- 12654154 (APPROX - VERIFY GMDB)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Delco/Continental
- Notes
- SPS programming via TIS2WEB. VIN programming. PASS-Key III+ security parameter transfer. Throttle body relearn via GDS2 idle learn. Injector balance rate reset after ECM replacement.
ECM - 2.0L LHU Turbo 12660 (APPROX - VERIFY GMDB)
- Part number
- 12660 (APPROX - VERIFY GMDB)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Delco/Continental
- Notes
- SPS programming via TIS2WEB. VIN programming. PASS-Key III+ transfer. Boost/fuel trims reset after replacement.
TCM - 6T45 / 6T70 (6-speed automatic)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- GDS2 TCM quick learn procedure after replacement. Transmission adaptive data reset. SPS programming if required.
BCM - Body Electronics
Body Control Module (BCM) 22896 (APPROX - VERIFY GMDB)
- Part number
- 22896 (APPROX - VERIFY GMDB)
- Security
- PASS-Key III+
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- SPS programming via TIS2WEB required after replacement. Configure vehicle options (heated seats, remote start, BSM) via GDS2 BCM calibration. VIN programming required. NOT plug and play.
HVAC Control Module
- Security
- none
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Auto climate (if equipped). GDS2 HVAC actuator calibration after replacement.
TCM - Transmission Computer
TCU - 6T40 6-Speed Auto 24256773
- Part number
- 24256773
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental MPC5674F
- Notes
- Requires VIN programming and transmission adaptive relearn. Use Dexron VI ATF. TCM ID and calibration matching required.
TCU - 6T45 6-Speed Auto 24256774
- Part number
- 24256774
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Continental MPC5674F
- Notes
- Requires VIN programming and transmission adaptive relearn. Use Dexron VI ATF. TCM ID and calibration matching required.
ABS - Brake Modules
Electronic Brake Control Module (EBCM) 13503 (APPROX)
- Part number
- 13503 (APPROX)
- Cloning supported
- Yes
- Notes
- GDS2 ABS/ESC init. 4-wheel bleed. Steering angle sensor zero-point calibration via GDS2 SAS reset.
Instrument Cluster & Steering Angle Modules
Instrument Panel Cluster (IPC) 23457891
- Part number
- 23457891
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 23457892
- Part number
- 23457892
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
MyLink Radio 7"
- Notes
- GDS2 radio setup after replacement. RKE pairing via GDS2.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- High-strength steel unibody
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
- Infotainment
- Chevrolet MyLink 7" (LT/LTZ); base LS standard AM/FM
- OTA Capable
- No
- Infotainment Name
- Chevrolet MyLink
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2016 - 2.4L EcoTec II 16v (LAF), 2.4L EcoTec II 16v (LEA), 3.0L V6 24v (LF1), 3.6L V6 24v (LFX).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2016 Chevrolet Equinox?
ADAS calibration pricing for a 2016 Chevrolet Equinox depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), Rear Cross Traffic Alert (RCTA), and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2016 Chevrolet Equinox?
Yes. The 2016 Chevrolet Equinox uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 22973618. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2016 Chevrolet Equinox?
After windshield replacement on a 2016 Chevrolet Equinox, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2016 Chevrolet Equinox module service take?
Most 2016 Chevrolet Equinox onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (3 ECU, 2 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2016 Chevrolet Equinox on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2016 Chevrolet Equinox. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2016 Chevrolet Equinox programming?
Every programming, cloning, and calibration job on the 2016 Chevrolet Equinox is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2016 Chevrolet Equinox can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2016 Chevrolet Equinox. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 4 ADAS module
Infotainment on this platform: Chevrolet MyLink. Send the VIN and the operations performed and we will confirm support and pricing.
OTHER CHEVROLET MODELS
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2016 Chevrolet Equinox covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 23223327
- ECU / PCM Part Numbers
- 12657691, 12668516
- BCM / Body Module Part Numbers
- 22896 (APPROX - VERIFY GMDB)
- TCU / TCM Part Numbers
- 24256773, 24256774
- SRS / Airbag Module Part Numbers
- 22973618, 84213723, 84213724, 20827689, 20827690, 13599654, 13502577, 13574936
- ABS / EBCM Part Numbers
- 13502585, 13510136
- Instrument Cluster (IPC) Part Numbers
- 23457891, 23457892
- Transmission Control Module (TCM) Part Numbers
- 24256773, 24256774
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Matching catalog references
Other vehicles with matching part references
These pages list a matching part reference in the same module category. This does not confirm interchangeability. Verify the complete part number, suffix, VIN and build before selecting a replacement.
Finish the repair
Need help finishing this repair?
Factory diagnostic software is available. We confirm the appropriate software and supported procedure for your vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible work.
GM Techline Connect Core Auto Logic has full GM Techline Connect access for Chevrolet, GMC, Buick and Cadillac vehicles. We confirm the supported procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.