Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2015 Chevrolet Equinox Supported Services

2015 Chevrolet Equinox

ADAS calibration, module programming, and security relearns

Standard trim configurations for 2015 Chevrolet Equinox; verify trim-specific options before ordering modules.

Technical snapshot
  • Platform C1XX (2nd Gen, 2010-2017)
  • CAN Architecture GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
  • Security GM PASS-Key III+ - transponder + RKE 315MHz rolling code; BCM holds key database
OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2015 Chevrolet Equinox. On this vehicle we cover documented systems include Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear Cross Traffic Alert (RCTA), this C1XX (2nd Gen, 2010-2017) platform vehicle, GM PASS-Key III+ immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.

Platform
C1XX (2nd Gen, 2010-2017)
Production
2005-present
Trim Levels
Standard trim configurations for 2015 Chevrolet Equinox; verify trim-specific options before ordering modules.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
YEAR-SPECIFIC NOTES

VIN / Build Split

VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.

SERVICE SNAPSHOT

Exact-year service summary for 2015 Chevrolet Equinox

ADAS coverage

This 2015 Chevrolet Equinox page documents 4 ADAS systems, including Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), Rear Cross Traffic Alert (RCTA), and Rear View Camera.

View ADAS data

Calibration triggers

Documented calibration triggers include Rear Bumper Repair or Replacement, Windshield Replacement, BCM Replacement, and Any Collision. Use the ADAS tab for the full trigger list.

View triggers

Programmable modules

This page indexes 22 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.

View modules

Gateway and security

This page includes 8 gateway, immobilizer, or key-security records for this 2015 Chevrolet Equinox.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2015 Chevrolet Equinox using the documented systems and module data on this page.

Choose a section
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Active Fuel Management (AFM) - 2.4L LE9 - Not Applicable; Remote Start - Optional; Heated Seats - Optional

Driver-assist suite

Side Blind Zone Alert (optional 2LT/LTZ); Rear Cross Traffic Alert (optional); no forward camera/radar on 2015 base

VIN and build split

VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.

Infotainment context

Chevrolet MyLink 7" (LT/LTZ); base LS has standard AM/FM display

Network and access

CAN: GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

GM GDS2 / GM Tech2Win / GM MDI 2

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

OEM subscription required

Make-level OEM tool map plus exact-year gateway and ADAS fields.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Tool subscription required

Service-level scanner-vendor source packet plus exact-year ADAS records.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Bench programmer source packet plus exact-year module/security records.

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2015 Chevrolet Equinox. Counts reflect modules our techs have programmed or calibrated on this exact platform.

ADAS Calibration
4 modules documented

Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.

Open ADAS tab
Engine / ECU Programming
3 modules documented

Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.

Open Modules tab
BCM / Body Programming
2 modules documented

Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.

Open Modules tab
Gateway / Security Access
6 modules documented

Secure gateway module identification, bypass workflow and security-access planning before programming.

Open Security tab
TCU / Transmission
2 modules documented

Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.

Open Modules tab
SRS / Airbag Reset
8 modules documented

Crash-data clear, hard-code reset and replacement airbag module configuration.

Open Modules tab
ABS / Brake Module
1 module documented

ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.

Open Modules tab
Key Security & Immobilizer
1 module documented

Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.

Open Security tab
IPC, SAS & Other Modules
4 modules documented

Instrument cluster cloning, steering angle sensor calibration and other supporting modules.

Open Modules tab
Connectivity & Accessories
2 modules documented

Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.

Open Modules tab
Recalibration Triggers
6 modules documented

Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.

Open ADAS tab

Need something not listed? Most undocumented modules can still be programmed.

Get a Quote
Feature availability 3

Active Fuel Management (AFM) - 2.4L LE9

Not Applicable

AFM not on 2.4L Ecotec - 4-cylinder only. N/A.

Remote Start

Optional

Available via BCM RPO configuration on equipped trims.

Heated Seats

Optional

LTZ trim. BCM configuration via GDS2.

WHAT WE RESOLVE

Common issues on this vehicle

Common Chevrolet Equinox issues we resolve on this platform: Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), Rear Cross Traffic Alert (RCTA), and Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - C1XX (2nd Gen, 2010-2017) platform uses GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps. Key programming and immobilizer faults - GM PASS-Key III+ immobilizer; all-keys-lost supported.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

Side Blind Zone Alert (optional 2LT/LTZ); Rear Cross Traffic Alert (optional); no forward camera/radar on 2015 base

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Blind Spot Monitor Sensor - Left (BSM)Side RadarRadarStatic + Dynamic Optional23234498 (APPROX - VERIFY GMDB)
Blind Spot Monitor Sensor - Right (BSM)Side RadarRadarStatic + Dynamic Optional23234499 (APPROX - VERIFY GMDB)
Rear Cross Traffic Alert (RCTA)Side RadarRadarNone Optional-
Rear View CameraRear CameraCameraStatic YES-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

Rear Bumper Repair or Replacement Affected: SBZA Left/Right Radar, RCTA

SBZA radar modules in rear bumper corners. If radar modules disturbed or replaced, GDS2 initialization required. RCTA is software-dependent on same sensors - verify RCTA and SBZA function post-repair at 20+ mph.

Windshield Replacement Affected: Rear View Camera display (indirect - no windshield camera on 2015)

No windshield-mounted camera on 2015 Equinox. Rear camera not affected by windshield R&R. SBZA and RCTA unaffected. No ADAS calibration required for windshield R&R on 2015 base.

BCM Replacement Affected: PASS-Key III+ key database, SBZA enable, Remote Start config

BCM replacement requires SPS programming + full key relearn with all customer keys present. SBZA feature enable and remote start configuration must be re-entered via GDS2 BCM calibration after replacement.

Any Collision Affected: SDM, all deployed airbags and sensors, SBZA radars

Full SRS scan mandatory. SDM with deployment DTC must be replaced - no crash clear. SBZA radar modules in rear corners may be physically damaged in rear collisions - inspect and initialize post-repair. Scan all modules for DTCs before delivery.

BSM Sensor Replacement

Blind spot monitoring sensor replacement requires calibration using GDS2/MDI2.

Mirror Replacement

If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS2/MDI2 if applicable.

SRS MODULES

SRS Modules

Sensing & Diagnostic Module (SDM) x8
22973618 Under center console
PART
22973618
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
84213723 Under center console
PART
84213723
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
84213724 Under center console
PART
84213724
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
20827689 Under center console
PART
20827689
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
20827690 Under center console
PART
20827690
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
13599654 Under center console
PART
13599654
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
13502577 Under center console
PART
13502577
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
13574936 Under center console
PART
13574936
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ECU MODULES

ECU Modules

ECM - 2.4L LE9 Ecotec 12654154 (APPROX - VERIFY GMDB)
PART
12654154 (APPROX - VERIFY GMDB)
PROTOCOL
OBD Programming Port
CODING
Yes
CLONE
Yes
CHIP/MCU
Delco/Continental
NOTES
SPS programming via TIS2WEB. VIN programming. PASS-Key III+ security parameter transfer. Throttle body relearn via GDS2 idle learn. Injector balance rate reset after ECM replacement.
ECM - 2.0L LHU Turbo 12660 (APPROX - VERIFY GMDB)
PART
12660 (APPROX - VERIFY GMDB)
PROTOCOL
OBD Programming Port
CODING
Yes
CLONE
Yes
CHIP/MCU
Delco/Continental
NOTES
SPS programming via TIS2WEB. VIN programming. PASS-Key III+ transfer. Boost/fuel trims reset after replacement.
TCM - 6T45 / 6T70 (6-speed automatic)
PROTOCOL
OBD Programming Port
CODING
Yes
CLONE
Yes
NOTES
GDS2 TCM quick learn procedure after replacement. Transmission adaptive data reset. SPS programming if required.
BCM MODULES

BCM Modules

Body Control Module (BCM) 22896 (APPROX - VERIFY GMDB)
PART
22896 (APPROX - VERIFY GMDB)
SECURITY
PASS-Key III+
CODING
Yes
CLONE
Yes
NOTES
SPS programming via TIS2WEB required after replacement. Configure vehicle options (heated seats, remote start, BSM) via GDS2 BCM calibration. VIN programming required. NOT plug and play.
HVAC Control Module
SECURITY
none
CODING
Yes
CLONE
No
NOTES
Auto climate (if equipped). GDS2 HVAC actuator calibration after replacement.
TCU / TCM TRANSMISSION MODULES

TCU / TCM Transmission Modules

TCU - 6T40 6-Speed Auto 24256951
PART
24256951
PROTOCOL
J2534
CODING
Yes
CLONE
Yes
CHIP/MCU
Continental MPC5674F
NOTES
TCC relearn required after programming. Use Dexron VI ATF. SPS programming required for VIN/calibration matching.
TCU - 6T45 6-Speed Auto 24256953
PART
24256953
PROTOCOL
J2534
CODING
Yes
CLONE
Yes
CHIP/MCU
Continental MPC5674F
NOTES
TCC relearn and adaptive learning reset required. Use Dexron VI ATF. SPS programming mandatory for proper operation.
ABS / BRAKE MODULES

ABS / Brake Modules

Electronic Brake Control Module (EBCM) 13503 (APPROX - VERIFY GMDB)
PART
13503 (APPROX - VERIFY GMDB)
CLONE
Yes
NOTES
GDS2 ABS/ESC initialization after replacement. 4-wheel manual bleed or GDS2 automated bleed sequence. Steering angle sensor zero-point calibration required - GDS2 SAS reset + drive straight at 35+ mph.
OTHER MODULES (IPC, SAS)

Other Modules (IPC, SAS)

Instrument Panel Cluster (IPC) 23457891
PART
23457891
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 23457892
PART
23457892
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
CODING
Yes
NOTES
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
CODING
Yes
NOTES
cross-year extension)
CONNECTIVITY & ACCESSORIES

Connectivity & Accessories

Remote Start Module (if equipped)
NOTES
BCM parameter enable for remote start. GDS2 configuration. OEM remote start uses RKE 315MHz fob sequence.
GATEWAY / SECURITY MODULES

Gateway / Security Modules

Central Gateway Module
MFG
Renesas
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
D70F3585
NOTES
Compatibility label: Chevrolet. Air conditioning Notes: Read/Write
Central Gateway Module
MFG
Renesas
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
D70F3558
NOTES
Compatibility label: Buick. BCM Notes: Read/Write
Central Gateway Module
MFG
Various / Unlisted
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
1M12S
NOTES
Compatibility label: CRUZE. BCM Notes: Years: 2015-
Central Gateway Module
MFG
Various / Unlisted
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
1M12S
NOTES
Compatibility label: Cavalier. BCM Notes: Years: 2015-
Central Gateway Module
MFG
Various / Unlisted
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
1M12S
NOTES
Compatibility label: Excelle. BCM Notes: Years: 2015-
Central Gateway Module
MFG
Various / Unlisted
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
1M12S
NOTES
Compatibility label: SAIL. BCM Notes: Years: 2015-
KEY SECURITY & IMMOBILIZER

Key Security & Immobilizer

  • System GM PASS-Key III+
  • Add Key Yes
  • All Keys Lost Yes

GM PASS-Key III+ - transponder + RKE 315MHz rolling code; BCM holds key database

IMMOBILIZER MODULES

Immobilizer Modules

PassKey III+ Immobilizer
SECURITY
PASS-Key III+
NOTES
No OBD PIN extraction available on C1XX. Key programming via GDS2 + TIS2WEB. All customer keys must be present for add-key. AKL requires TIS2WEB dealer authorization.
KEY & FOB TYPES

Key & Fob Types

Transponder Key 13500221 (APPROX - VERIFY GMDB)
PART
13500221 (APPROX - VERIFY GMDB)
NOTES
PASS-Key III+ system. Key programming via GDS2 + TIS2WEB. Minimum 2 working keys for add-key. AKL: TIS2WEB dealer authorization required. No OBD PIN extraction possible on C1XX.

Replacement Notes

GM PASS-Key III+ system. SPS/ACDelco TDS required for key programming and module replacement. No obd pin extraction; akl supported.

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
High-strength steel unibody
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
Infotainment
Chevrolet MyLink 7" (LT/LTZ); base LS has standard AM/FM display
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed
Reviewed coverage: 2015 - 2.4L EcoTec II 16v (LAF), 2.4L EcoTec II 16v (LEA), 3.0L V6 24v (LF1), 3.6L V6 24v (LFX).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2015 Chevrolet Equinox?

ADAS calibration pricing for a 2015 Chevrolet Equinox depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), Rear Cross Traffic Alert (RCTA), and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2015 Chevrolet Equinox?

Yes. The 2015 Chevrolet Equinox uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 22973618. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2015 Chevrolet Equinox?

After windshield replacement on a 2015 Chevrolet Equinox, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.

How long does a 2015 Chevrolet Equinox module service take?

Most 2015 Chevrolet Equinox onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 21 programmable modules documented in our database (3 ECU, 2 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.

Do you cover the 2015 Chevrolet Equinox on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2015 Chevrolet Equinox. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2015 Chevrolet Equinox programming?

Every programming, cloning, and calibration job on the 2015 Chevrolet Equinox is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Can you program a 2015 Chevrolet Equinox with no working keys (all-keys-lost)?

Yes - all-keys-lost is supported on the 2015 Chevrolet Equinox. Immobilizer generation on this platform: GM PASS-Key III+. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.

Which modules on a 2015 Chevrolet Equinox can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2015 Chevrolet Equinox. For this vehicle our database documents:

  • 3 engine control (ECU/PCM)
  • 2 transmission control (TCU/TCM)
  • 2 body control (BCM and related)
  • 1 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 1 key & fob
  • 2 instrument cluster (IPC)
  • 2 steering angle sensor (SAS)
  • 4 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2015 Chevrolet Equinox covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ADAS Module Part Numbers
23223327
ECU / PCM Part Numbers
12657691, 12668516
BCM / Body Module Part Numbers
22896 (APPROX - VERIFY GMDB)
TCU / TCM Part Numbers
24256951, 24256953
SRS / Airbag Module Part Numbers
22973618, 84213723, 84213724, 20827689, 20827690, 13599654, 13502577, 13574936
ABS / EBCM Part Numbers
13502585, 13510136
Instrument Cluster (IPC) Part Numbers
23457891, 23457892
Transmission Control Module (TCM) Part Numbers
24256951, 24256953

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065 Get a Quote

Shared module fitment

Vehicles sharing modules with the 2015 Chevrolet Equinox

These vehicles use one or more of the same replacement modules indexed for this vehicle.