VIN / Build Split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2018 Chevrolet Equinox Supported Services
2018 Chevrolet Equinox
ADAS calibration, module programming, and security relearns
Trims: LS, LT, RS, Premier. Chevy Safety Assist standard all trims (2022+).
Technical snapshot
- Platform D2XX (C1XX 3rd Gen redesign, 2018+)
- CAN Architecture GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
- Security GM PASS-Key III+ - Intelligent Access 315MHz; BCM holds key database
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Chevrolet Equinox. On this vehicle we cover documented systems include Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM), this D2XX (C1XX 3rd Gen redesign, 2018+) platform vehicle, GM PASS-Key III+ (D2XX) immobilizer support, Chevrolet MyLink infotainment programming. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
D2XX (C1XX 3rd Gen redesign, 2018+)
Production
2005-present
Trim Levels
Trims: LS, LT, RS, Premier. Chevy Safety Assist standard all trims (2022+).
Drivetrain
FWD / AWD
Engine
-
CAN Speed
GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
YEAR-SPECIFIC NOTES
Infotainment
Chevrolet MyLink
Exact-year service summary for 2018 Chevrolet Equinox
ADAS coverage
This 2018 Chevrolet Equinox page documents 5 ADAS systems, including Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear Cross Traffic Alert (RCTA).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Rear Bumper Repair, BCM Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 18 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 8 gateway, immobilizer, or key-security records for this 2018 Chevrolet Equinox.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2018 Chevrolet Equinox using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Forward Safety Alert (new 2018) - Available; BSM / RCTA - Optional; Apple CarPlay / Android Auto - Standard
Driver-assist suite
Forward Safety Alert (new 2018), Blind Spot Monitoring/Rear Cross-Traffic Alert (Premier standard, LT optional), Lane Change Alert, HD Rear Camera standard
VIN and build split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1G1 (Chevy car), 1GC (Chevy truck), 3GN (Chevy SUV). Position 8 = engine code. Position 10 = model year code.
Infotainment context
Chevrolet MyLink; Chevrolet MyLink 7" or 8" touchscreen; Apple CarPlay + Android Auto standard 2018
Network and access
CAN: GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
GM GDS2 / GM Tech2Win / GM MDI 2
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2018 Chevrolet Equinox. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
6 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
3 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
5 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
4 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
1 module documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
7 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Forward Safety Alert (new 2018)
AvailableNew for 2018 D2XX - windshield forward camera required. Calibration needed after windshield R&R.
BSM / RCTA
OptionalStandard Premier, optional LT. GDS2 BCM config.
Apple CarPlay / Android Auto
StandardStandard on all 2018 trims.
WHAT WE RESOLVE
Common issues on this vehicle
Common Chevrolet Equinox issues we resolve on this platform: Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), and Rear Cross Traffic Alert (RCTA) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - D2XX (C1XX 3rd Gen redesign, 2018+) platform uses GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps. Key programming and immobilizer faults - GM PASS-Key III+ (D2XX) immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Forward Safety Alert (new 2018), Blind Spot Monitoring/Rear Cross-Traffic Alert (Premier standard, LT optional), Lane Change Alert, HD Rear Camera standard
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | 84430 (APPROX - VERIFY GMDB) | |
| Blind Spot Monitor Sensor - Left (BSM) | Side Radar | Radar | Static + Dynamic | Optional | 84430 L (APPROX - VERIFY GMDB) | |
| Blind Spot Monitor Sensor - Right (BSM) | Side Radar | Radar | Static + Dynamic | Optional | 84430 R (APPROX - VERIFY GMDB) | |
| Rear Cross Traffic Alert (RCTA) | Side Radar | Radar | None | Optional | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Forward Camera (IPMA), Forward Safety Alert
NEW for 2018 - forward camera windshield-mounted. GDS2 static calibration required after any windshield R&R. Level surface, target chart per WSM. Verify Forward Safety Alert post-calibration. Not required on 2015-2017 (no windshield camera on prior gen).
Rear Bumper Repair Affected: BSM Left/Right, RCTA
BSM radars in rear bumper corners. GDS2 init if disturbed. Verify BSM + RCTA at 20+ mph.
BCM Replacement Affected: PASS-Key III+ database, BSM enable, vehicle options
SPS programming + full key relearn. Reconfigure BSM, heated seats, remote start via GDS2.
Any Collision Affected: SDM, airbags, BSM radars, forward camera
SDM with deployment must be replaced. Forward camera and BSM radars may be damaged. Full scan + recalibration before delivery.
Forward Camera Replacement
Camera module replacement requires full recalibration using GDS2/MDI2.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using GDS2/MDI2.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS2/MDI2 if applicable.
SRS MODULES
SRS Modules
Sensing & Diagnostic Module (SDM) 13520997
- PART
- 13520997
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Sensing & Diagnostic Module (SDM) 84288917
- PART
- 84288917
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Sensing & Diagnostic Module (SDM) 84288918
- PART
- 84288918
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Sensing & Diagnostic Module (SDM) 13576422
- PART
- 13576422
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
Sensing & Diagnostic Module (SDM) 13504470
- PART
- 13504470
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ECU MODULES
ECU Modules
ECM - 1.5L LYX Turbo 12703 (APPROX - VERIFY GMDB)
- PART
- 12703 (APPROX - VERIFY GMDB)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Delco/Continental
- NOTES
- SPS via TIS2WEB. VIN + PASS-Key III+ transfer. Throttle/idle relearn.
ECM - 2.0L LSY Turbo (Premier) 12706 (APPROX - VERIFY GMDB)
- PART
- 12706 (APPROX - VERIFY GMDB)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Delco/Continental
- NOTES
- SPS via TIS2WEB. VIN + PASS-Key III+ transfer. NOT interchangeable with LYX. Boost trim reset.
ECM - 1.6L LH7 Diesel (if equipped)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch (diesel)
- NOTES
- SPS via TIS2WEB. Diesel-specific calibrations. DPF/NOx adaptation reset after ECM replacement.
BCM MODULES
BCM Modules
Body Control Module (BCM) 84252 (APPROX - VERIFY GMDB)
- PART
- 84252 (APPROX - VERIFY GMDB)
- SECURITY
- PASS-Key III+
- CODING
- Yes
- CLONE
- Yes
- NOTES
- SPS via TIS2WEB. Configure options (BSM, heated seats, remote start) via GDS2 BCM calibration. VIN programming required.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 6T40 6-Speed Auto 24267639
- PART
- 24267639
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental MPC5674F
- NOTES
- TDS relearn required, GM MDI/GDS2 tool needed, DEXRON VI ATF
TCU - 6T45 6-Speed Auto 24267640
- PART
- 24267640
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental MPC5674F
- NOTES
- TDS relearn required, GM MDI/GDS2 tool needed, DEXRON VI ATF
TCU - 9T50 9-Speed Auto 84632
- PART
- 84632
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental TC1797
- NOTES
- Security linked TCU, TDS relearn mandatory, requires original unit repair, DEXRON VI ATF
ABS / BRAKE MODULES
ABS / Brake Modules
Electronic Brake Control Module (EBCM) 84 (APPROX - VERIFY GMDB)
- PART
- 84 (APPROX - VERIFY GMDB)
- CLONE
- Yes
- NOTES
- GDS2 ABS/ESC init. 4-wheel bleed. SAS zero-point calibration via GDS2 after replacement.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 84459120
- PART
- 84459120
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) 84459121
- PART
- 84459121
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
MyLink Radio 7" or 8"
- NOTES
- GDS2 radio setup after replacement. CarPlay/AA standard 2018. RKE pairing via GDS2.
GATEWAY / SECURITY MODULES
Gateway / Security Modules
Central Gateway Module
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3585
- NOTES
- Compatibility label: Chevrolet. Air conditioning Notes: Read/Write
Central Gateway Module
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3558
- NOTES
- Compatibility label: Buick. BCM Notes: Read/Write
Central Gateway Module
- MFG
- Various / Unlisted
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- 1M12S
- NOTES
- Compatibility label: CRUZE. BCM Notes: Years: 2015-
Central Gateway Module
- MFG
- Various / Unlisted
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- 1M12S
- NOTES
- Compatibility label: Cavalier. BCM Notes: Years: 2015-
Central Gateway Module
- MFG
- Various / Unlisted
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- 1M12S
- NOTES
- Compatibility label: Excelle. BCM Notes: Years: 2015-
Central Gateway Module
- MFG
- Various / Unlisted
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- 1M12S
- NOTES
- Compatibility label: SAIL. BCM Notes: Years: 2015-
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System GM PASS-Key III+ (D2XX)
- Add Key Yes
- All Keys Lost Yes
GM PASS-Key III+ - Intelligent Access 315MHz; BCM holds key database
IMMOBILIZER MODULES
Immobilizer Modules
PassKey III+ Immobilizer
- SECURITY
- PASS-Key III+
- NOTES
- No OBD PIN extraction. Key programming via GDS2 + TIS2WEB. AKL requires dealer auth. Intelligent Access (push-button start) on equipped trims.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob 13508771 (APPROX - VERIFY GMDB)
- PART
- 13508771 (APPROX - VERIFY GMDB)
- NOTES
- PASS-Key III+. GDS2 + TIS2WEB for add-key. AKL: TIS2WEB dealer auth. Minimum 2 keys for add-key. Max 8 keys.
Replacement Notes
GM PASS-Key III+ (D2XX) system. SPS/ACDelco TDS required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- High-strength steel unibody
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- GMLAN HS-CAN + MS-CAN; OBD2 DLC Pin 6/14 HS-CAN 500 kbps
- Infotainment
- Chevrolet MyLink 7" or 8" touchscreen; Apple CarPlay + Android Auto standard 2018
- OTA Capable
- No
- Infotainment Name
- Chevrolet MyLink
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2018 - 1.5L Turbo 16v (LSD), 1.5L Turbo 16v (LYX), 1.6L TD 16v (LH7), 2.0L EcoTec III (LTG).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2018 Chevrolet Equinox?
ADAS calibration pricing for a 2018 Chevrolet Equinox depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Blind Spot Monitor Sensor - Left (BSM), Blind Spot Monitor Sensor - Right (BSM), Rear Cross Traffic Alert (RCTA), and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2018 Chevrolet Equinox?
Yes. The 2018 Chevrolet Equinox uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 13520997. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2018 Chevrolet Equinox?
After windshield replacement on a 2018 Chevrolet Equinox, Forward Camera (Monocular) and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2018 Chevrolet Equinox module service take?
Most 2018 Chevrolet Equinox onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 20 programmable modules documented in our database (3 ECU, 1 BCM, 3 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2018 Chevrolet Equinox on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2018 Chevrolet Equinox. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2018 Chevrolet Equinox programming?
Every programming, cloning, and calibration job on the 2018 Chevrolet Equinox is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2018 Chevrolet Equinox with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2018 Chevrolet Equinox. Immobilizer generation on this platform: GM PASS-Key III+ (D2XX). Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2018 Chevrolet Equinox can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2018 Chevrolet Equinox. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 3 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 5 ADAS module
Infotainment on this platform: Chevrolet MyLink. Send the VIN and the operations performed and we will confirm support and pricing.
OTHER CHEVROLET MODELS
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2018 Chevrolet Equinox covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 84347922, 84347923
- ECU / PCM Part Numbers
- 12694149, 12694150
- BCM / Body Module Part Numbers
- 84252 (APPROX - VERIFY GMDB)
- TCU / TCM Part Numbers
- 24267639, 24267640, 84632
- SRS / Airbag Module Part Numbers
- 13520997, 84288917, 84288918, 13576422, 13504470
- ABS / EBCM Part Numbers
- 84344557, 84344558
- Instrument Cluster (IPC) Part Numbers
- 84459120, 84459121
- Transmission Control Module (TCM) Part Numbers
- 24267639, 24267640, 84632
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2018 Chevrolet Equinox
These vehicles use one or more of the same replacement modules indexed for this vehicle.