Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Chevrolet Equinox 1st Gen (2005-2009) ADAS Calibration & Module Programming
Covers model years 2005-2009 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Chevrolet Equinox built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
PlatformTheta (1st Gen, 2005-2009)
CAN ArchitectureHS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
SecurityGM PASSKey III / PassLock II (BCM security seed); resistor pellet or PassLock cylinder sensor; PIN via Tech 2 or GDS2; AKL requires BCM relearn procedure + security PIN
The ADAS, module, and security rows below are consolidated across the full 2005-2009 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2005-2009”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2006 Chevrolet Equinox. On this vehicle we cover documented systems include No Factory ADAS Systems, this Theta (1st Gen, 2005-2009) platform vehicle, PK3/PK3+ / PEPS immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Merged ADAS coverage includes 5 system records, including No Factory ADAS Systems (2005), No Factory ADAS Systems (2006), No Factory ADAS Systems (2007), and Forward Collision Warning (2008-2009). Year-marked systems apply only to the shown range.
The merged generation page indexes 39 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, SAS coverage. Part numbers are confirmed for the exact year/VIN.
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Chevrolet Equinox 2005-2009 span, with exact-year validation before service.
39 documented Chevrolet Equinox modules across 2005-2009. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
Sensing & Diagnostic Module (SDM)x14
15282799Verify by VIN2005-2008Under center console
_years covers only 2005-2008 for this generation
Used/donor module guide
Compatible donor years: 2005, 2006, 2007, 2008
Always match the full part number before buying a used module.
PART
15282799
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
15261949Verify by VIN2005-2006Under center console
_years covers only 2005-2006 for this generation
Used/donor module guide
Compatible donor years: 2005, 2006
Always match the full part number before buying a used module.
PART
15261949
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
22733328Verify by VIN2005Under center console
_years covers only 2005 for this generation
Used/donor module guide
Compatible donor years: 2005
Always match the full part number before buying a used module.
PART
22733328
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
22733329Verify by VIN2005Under center console
_years covers only 2005 for this generation
Used/donor module guide
Compatible donor years: 2005
Always match the full part number before buying a used module.
PART
22733329
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
10373058Verify by VIN2005-2006Under center console
_years covers only 2005-2006 for this generation
Used/donor module guide
Compatible donor years: 2005, 2006
Always match the full part number before buying a used module.
PART
10373058
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
10373059Verify by VIN2005-2006Under center console
_years covers only 2005-2006 for this generation
Used/donor module guide
Compatible donor years: 2005, 2006
Always match the full part number before buying a used module.
PART
10373059
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
15860055Verify by VIN2005-2006Under center console
_years covers only 2005-2006 for this generation
Used/donor module guide
Compatible donor years: 2005, 2006
Always match the full part number before buying a used module.
PART
15860055
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
15141065Verify by VIN2006Under center console
_years covers only 2006 for this generation
Used/donor module guide
Compatible donor years: 2006
Always match the full part number before buying a used module.
PART
15141065
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
15141066Verify by VIN2006Under center console
_years covers only 2006 for this generation
Used/donor module guide
Compatible donor years: 2006
Always match the full part number before buying a used module.
PART
15141066
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
20940100Verify by VIN2007-2008Under center console
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
PART
20940100
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
15916307Verify by VIN2007-2008Under center console
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
PART
15916307
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
25758127Verify by VIN2007-2008Under center console
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
PART
25758127
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
15797467Verify by VIN2007-2008Under center console
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
PART
15797467
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
25850233Verify by VIN2007-2009Under center console
_years covers only 2007-2009 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008, 2009
Always match the full part number before buying a used module.
PART
25850233
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ECU MODULES
ECU Modules
Powertrain Control Module (PCM) - 3.4L LNJ V6x3
12591279Verify by VIN2005J2534
_years covers only 2005 for this generation
Used/donor module guide
Compatible donor years: 2005
Always match the full part number before buying a used module.
PART
12591279
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
GMPartsGiant lists 12591279 specifically for 2005 Equinox 3.4L V6; confirmed by ecmrebuilders.com and autocomputerperformance.net as OEM 2005 Equinox PCM. | Sources: https://www.gmpartsgiant.com/oem-chevrolet-equinox-engine_control_module.html
12600928Verify by VIN2006J2534
_years covers only 2006 for this generation
Used/donor module guide
Compatible donor years: 2006
Always match the full part number before buying a used module.
PART
12600928
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
GMPartsGiant and ecmrebuilders.com both confirm 12600928 as the 2006 Equinox 3.4L PCM; fs1inc.com shows 12600928 as the OEM/hardware number for multiple 2006 variants. | Sources: https://www.gmpartsgiant.com/oem-chevrolet-equinox-engine_control_module.html
19210738Verify by VIN2007J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PART
19210738
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
GMPartsGiant lists 19210738 specifically for 2007 Equinox 3.4L V6; same PN also appears on 2007 Tahoe/Silverado GMT900 PCM - shared hardware across platforms. | Sources: https://www.gmpartsgiant.com/oem-chevrolet-equinox-engine_control_module.html
Engine Control Module (ECM) - 3.4L LNJ V6x2
12612384Verify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
12612384
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
GMPartsGiant lists 12612384 for 2008-09 Equinox 3.4L; Flashmasters and Amazon confirm 12612384 as the OEM part number for 2008-09 Equinox 3.4L with E38 service designation. | Sources: https://www.gmpartsgiant.com/oem-chevrolet-equinox-engine_control_module.html
12612384Verify by VIN2009J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
PART
12612384
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
12612384 confirmed for 2009 Equinox 3.4L by multiple sources including ARES Technologies (shows supersession to 12622141); same E38 family PN as 2008. | Sources: https://www.gmpartsgiant.com/oem-chevrolet-equinox-engine_control_module.html
Engine Control Module (ECM) - 3.6L LY7 V6x2
12623327Verify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
12623327
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
GMPartsGiant lists 12623327 for 2008-09 Equinox 3.6L V6; mintt.com and allcomputerresources.com both confirm this as the 2008 Equinox 3.6L ECM. | Sources: https://www.gmpartsgiant.com/oem-chevrolet-equinox-engine_control_module.html
12623327Verify by VIN2009J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
PART
12623327
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
12623327 confirmed for 2009 Equinox 3.6L by GMPartsGiant and allcomputerresources.com; same PN spans 2008-09 Equinox 3.6L applications. | Sources: https://www.gmpartsgiant.com/oem-chevrolet-equinox-engine_control_module.html
BCM MODULES
BCM Modules
BCM (Body Control Module)Verify by VIN
coding and programming fields are absent or ambiguous
Always match the full part number before buying a used module.
PART
GDS2 WORKFLOW
NOTES
Infotainment and OnStar equipment vary by model year, trim, and build. Use GM service information and SPS/GDS2 procedures for setup, replacement, and calibration checks. Do not apply newer OTA-only workflows to this row.
Body, RKE, TPMS, and convenience electronics - if equippedVerify by VINGDS2 WORKFLOW
coding and programming fields are absent or ambiguous
Always match the full part number before buying a used module.
PART
GDS2 WORKFLOW
NOTES
Verify installed options by VIN before service. Module replacement can require option setup, key/security relearn, TPMS relearn, and DTC checks with GM-capable diagnostics.
10 gateway, immobilizer, and security items documented across 2005-2009.
Chevrolet MyLink 7" (LT/LTZ); base LS has standard AM/FM display
OTA Capable
No
ECU Unlock Supported
No
Custom Programming
Yes
WHAT WE RESOLVE
1st Gen (2005-2009) common module and ADAS issues
ADAS calibration driftWatch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include No Factory ADAS Systems (2005), No Factory ADAS Systems (2006), No Factory ADAS Systems (2007), and Forward Collision Warning (2008-2009). Year-marked systems apply only to the shown range.
SRS crash-data and warning lightSRS service can involve Sensing & Diagnostic Module (SDM) (2005-2008), Sensing & Diagnostic Module (SDM) (2005-2006), and Sensing & Diagnostic Module (SDM) (2005). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
Replacement module setupECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
Gateway, key, and immobilizer accessGateway, key, and immobilizer procedures are represented by 10 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
Shared module fitment
Vehicles sharing these modules
These vehicles use one or more indexed replacement modules from this generation.
Can you program Chevrolet Equinox (2005-2009) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Chevrolet Equinox (2005-2009). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Chevrolet Equinox (2005-2009)?
The Chevrolet Equinox (2005-2009) generation currently shows 29 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Sensing & Diagnostic Module (SDM) (2005-2008), Sensing & Diagnostic Module (SDM) (2005-2006), and Sensing & Diagnostic Module (SDM) (2005). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 15282799 (2005-2008) - confirm for your exact year/VIN.
Does Chevrolet Equinox (2005-2009) need ADAS calibration after glass or collision work?
The merged generation data documents 5 ADAS systems, including No Factory ADAS Systems (2005), No Factory ADAS Systems (2006), No Factory ADAS Systems (2007), Forward Collision Warning (2008-2009), and Rear View Camera (2009). Calibration triggers include PCM Replacement and EBCM Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Chevrolet Equinox (2005-2009)?
Yes. The generation data includes 14 SRS records, including Sensing & Diagnostic Module (SDM) (2005-2008), Sensing & Diagnostic Module (SDM) (2005-2006), and Sensing & Diagnostic Module (SDM) (2005). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 15282799 (2005-2008) - confirm for your exact year/VIN.
Do all Chevrolet Equinox (2005-2009) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2005-2009; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Chevrolet Equinox (2005-2009)?
Yes, where the VIN and security workflow support it. The generation data includes 10 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Chevrolet Equinox (2005-2009)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Chevrolet Equinox (2005-2009) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.