Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth

No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.

2005 Chevrolet Equinox Supported Services

2005 Chevrolet Equinox

ADAS calibration, module programming, and security relearns

Full ADAS calibration, module programming, and key security work for the 2005 Chevrolet Equinox. Mobile service is available in the Dallas/Fort Worth service area; mail-in is temporarily unavailable.

Technical snapshot
  • Platform Theta (1st Gen, 2005-2009)
  • CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
  • Security GM PASSKey III / PassLock II (BCM security seed); resistor pellet or PassLock cylinder sensor; PIN via Tech 2 or GDS2; AKL requires BCM relearn procedure + security PIN
OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2005 Chevrolet Equinox. On this vehicle we cover documented systems include No Factory ADAS Systems, this Theta (1st Gen, 2005-2009) platform vehicle, PK3/PK3+ / PEPS immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.

Platform
Theta (1st Gen, 2005-2009)
Production
2005-present
Trim Levels
-
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
SERVICE SNAPSHOT

Exact-year service summary for 2005 Chevrolet Equinox

Electronic systems coverage

This 2005 Chevrolet Equinox page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.

View systems

Programmable modules

This page indexes 18 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and SAS coverage.

View modules

Gateway and security

This page includes 9 gateway, immobilizer, or key-security records for this 2005 Chevrolet Equinox.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2005 Chevrolet Equinox using the documented module data on this page.

Choose a section
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Immobilizer: PK3/PK3+ / PEPS - Standard; Platform: Theta (1st Gen, 2005-2009) - Confirmed

Driver-assist suite

No standard ADAS suite - pre-Safety Assist generation. Optional Forward Collision Alert and Lane Departure Warning on upper trims.

Infotainment context

Chevrolet MyLink 7" (LT/LTZ); base LS has standard AM/FM display

Network and access

CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

GM GDS2 / GM Tech2Win / GM MDI 2

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

OEM subscription required

Make-level OEM tool map plus exact-year gateway and ADAS fields.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Tool subscription required

Service-level scanner-vendor source packet plus exact-year ADAS records.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Bench programmer source packet plus exact-year module/security records.

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2005 Chevrolet Equinox. Counts reflect modules our techs have programmed or calibrated on this exact platform.

Engine / ECU Programming
1 module documented

Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.

Open Modules tab
BCM / Body Programming
1 module documented

Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.

Open Modules tab
Gateway / Security Access
6 modules documented

Secure gateway module identification, bypass workflow and security-access planning before programming.

Open Security tab
TCU / Transmission
2 modules documented

Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.

Open Modules tab
SRS / Airbag Reset
7 modules documented

Crash-data clear, hard-code reset and replacement airbag module configuration.

Open Modules tab
ABS / Brake Module
3 modules documented

ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.

Open Modules tab
Key Security & Immobilizer
1 module documented

Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.

Open Security tab
IPC, SAS & Other Modules
2 modules documented

Instrument cluster cloning, steering angle sensor calibration and other supporting modules.

Open Modules tab
Connectivity & Accessories
2 modules documented

Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.

Open Modules tab

Need something not listed? Most undocumented modules can still be programmed.

Feature availability 2

Immobilizer: PK3/PK3+ / PEPS

Standard

Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.

Platform: Theta (1st Gen, 2005-2009)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Chevrolet Equinox issues we resolve on this platform: No Factory ADAS Systems recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Theta (1st Gen, 2005-2009) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - PK3/PK3+ / PEPS immobilizer; all-keys-lost supported.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

No standard ADAS suite - pre-Safety Assist generation. Optional Forward Collision Alert and Lane Departure Warning on upper trims.

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
No Factory ADAS SystemsNoneNoneNone No-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

PCM Replacement

GDS2 SPS calibration download + PASSLOCK relearn.

EBCM Replacement

GDS2 ABS automated bleed + WSS relearn.

SRS MODULES

SRS Modules

Sensing & Diagnostic Module (SDM) x7
15282799 Under center console
PART
15282799
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
15261949 Under center console
PART
15261949
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
22733328 Under center console
PART
22733328
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
22733329 Under center console
PART
22733329
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
10373058 Under center console
PART
10373058
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
10373059 Under center console
PART
10373059
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
15860055 Under center console
PART
15860055
LOCATION
Under center console
MFG
Continental
NOTES
Requires GM GDS2 / Tech2 or J2534 for SRS reset. DTC B0100 common after crash events. Wait 90 seconds after ignition off before disconnecting battery.
ECU MODULES

ECU Modules

Powertrain Control Module (PCM) - 3.4L LNJ V6 12591279
PART
12591279
PROTOCOL
J2534
CODING
Yes
CLONE
No
BCM MODULES

BCM Modules

BCM (Body Control Module)
NOTES
GM BCM. GDS2/MDI2 SPS programming + PASSLOCK/PASSKEY relearn.
TCU / TCM TRANSMISSION MODULES

TCU / TCM Transmission Modules

TCU - 5L40-E 5-Speed Auto 24236479
PART
24236479
PROTOCOL
J2534
CODING
Yes
CLONE
Yes
CHIP/MCU
Motorola MPC565
NOTES
Requires GM Tech2 or MDI for programming, adaptive relearn required, Dexron VI ATF, VIN coding mandatory
TCU - 5L50-E 5-Speed Auto 24236481
PART
24236481
PROTOCOL
J2534
CODING
Yes
CLONE
Yes
CHIP/MCU
Motorola MPC565
NOTES
Requires GM Tech2 or MDI for programming, adaptive relearn required, Dexron VI ATF, VIN coding mandatory
ABS / BRAKE MODULES

ABS / Brake Modules

EBCM (Electronic Brake Control Module)
NOTES
GM EBCM. GDS2 automated bleed procedure + WSS relearn.
Wheel Speed Sensor - Front (each)
NOTES
Replace if DTC C0035/C0040 set.
Wheel Speed Sensor - Rear (each)
NOTES
Replace if DTC C0045/C0050 set.
OTHER MODULES (IPC, SAS)

Other Modules (IPC, SAS)

Steering Angle Sensor (SAS)
CODING
Yes
NOTES
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
CODING
Yes
NOTES
cross-year extension)
CONNECTIVITY & ACCESSORIES

Connectivity & Accessories

Factory radio, navigation, display, and OnStar equipment - VIN-specific GDS2 WORKFLOW
PART
GDS2 WORKFLOW
NOTES
Infotainment and OnStar equipment vary by model year, trim, and build. Use GM service information and SPS/GDS2 procedures for setup, replacement, and calibration checks. Do not apply newer OTA-only workflows to this row.
Body, RKE, TPMS, and convenience electronics - if equipped GDS2 WORKFLOW
PART
GDS2 WORKFLOW
NOTES
Verify installed options by VIN before service. Module replacement can require option setup, key/security relearn, TPMS relearn, and DTC checks with GM-capable diagnostics.
GATEWAY / SECURITY MODULES

Gateway / Security Modules

Central Gateway Module
MFG
Renesas
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
D70F3585
NOTES
Compatibility label: Chevrolet. Air conditioning Notes: Read/Write
Central Gateway Module
MFG
Renesas
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
D70F3558
NOTES
Compatibility label: Buick. BCM Notes: Read/Write
Central Gateway Module
MFG
Various / Unlisted
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
1M12S
NOTES
Compatibility label: CRUZE. BCM Notes: Years: 2015-
Central Gateway Module
MFG
Various / Unlisted
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
1M12S
NOTES
Compatibility label: Cavalier. BCM Notes: Years: 2015-
Central Gateway Module
MFG
Various / Unlisted
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
1M12S
NOTES
Compatibility label: Excelle. BCM Notes: Years: 2015-
Central Gateway Module
MFG
Various / Unlisted
SECURITY
VIN-locked (UDS)
VIN LOCKED
Yes
CODING
Yes
CHIP/MCU
1M12S
NOTES
Compatibility label: SAIL. BCM Notes: Years: 2015-
KEY SECURITY & IMMOBILIZER

Key Security & Immobilizer

  • System PK3/PK3+ / PEPS
  • Add Key Yes
  • All Keys Lost Yes

GM PASSKey III / PassLock II (BCM security seed); resistor pellet or PassLock cylinder sensor; PIN via Tech 2 or GDS2; AKL requires BCM relearn procedure + security PIN

IMMOBILIZER MODULES

Immobilizer Modules

BCM (PASS-Key III+ database)
NOTES
GM PASSKEY III+ in BCM. GDS2 password reset for AKL. Seed/key algorithm via GDS2 IMMO function.
KEY & FOB TYPES

Key & Fob Types

GM PASSKEY III+ Transponder Key
NOTES
Resistor + transponder. GDS2 or Tech 2 programming. AKL via security seed.
GM Remote Key Fob (RKE)
NOTES
315MHz. Program via GDS2 or 10x lock/unlock cycle for basic fobs.

Replacement Notes

PK3/PK3+ / PEPS system. SPS/ACDelco TDS required for key programming and module replacement. Security pin required; akl supported.

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
High-strength steel unibody
OBD Protocol
ISO 9141-2 / KWP2000 (OBD-II, pre-CAN)
CAN Architecture
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Infotainment
Chevrolet MyLink 7" (LT/LTZ); base LS has standard AM/FM display
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed
Reviewed coverage: 2005 - 3.4L V6 12v (LNJ), 3.6L V6 24v (LLT).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2005 Chevrolet Equinox?

ADAS calibration pricing for a 2005 Chevrolet Equinox depends on which of its 1 documented systems need work after a repair. This vehicle is documented with No Factory ADAS Systems. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2005 Chevrolet Equinox?

Yes. The 2005 Chevrolet Equinox uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 15282799. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2005 Chevrolet Equinox?

After windshield replacement on a 2005 Chevrolet Equinox, the forward-facing ADAS camera typically requires recalibration before lane-keep, pre-collision, and adaptive-cruise systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.

How long does a 2005 Chevrolet Equinox module service take?

Most 2005 Chevrolet Equinox onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 18 programmable modules documented in our database (1 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.

Do you cover the 2005 Chevrolet Equinox on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2005 Chevrolet Equinox. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2005 Chevrolet Equinox programming?

Every programming, cloning, and calibration job on the 2005 Chevrolet Equinox is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Can you program a 2005 Chevrolet Equinox with no working keys (all-keys-lost)?

Yes - all-keys-lost is supported on the 2005 Chevrolet Equinox. Immobilizer generation on this platform: PK3/PK3+ / PEPS. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.

Which modules on a 2005 Chevrolet Equinox can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2005 Chevrolet Equinox. For this vehicle our database documents:

  • 1 engine control (ECU/PCM)
  • 2 transmission control (TCU/TCM)
  • 1 body control (BCM and related)
  • 3 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 2 key & fob
  • 2 steering angle sensor (SAS)
  • 1 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2005 Chevrolet Equinox covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ECU / PCM Part Numbers
12591279
TCU / TCM Part Numbers
24236479, 24236481
SRS / Airbag Module Part Numbers
15282799, 15261949, 22733328, 22733329, 10373058, 10373059, 15860055
Transmission Control Module (TCM) Part Numbers
24236479, 24236481

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065

Shared module fitment

Vehicles sharing modules with the 2005 Chevrolet Equinox

These vehicles use one or more of the same replacement modules indexed for this vehicle.