VIN / Build Split
VIN pos 4-8 identifies series/body/engine. GM WMI: 1GY (Cadillac). Position 8 = engine code. Position 10 = model year code.
Choose year/make/model, or paste a VIN to start a quote.
ADAS calibration, module programming, and security relearns
Standard trim configurations for 2017 Cadillac Escalade; verify trim-specific options before ordering modules.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2017 Cadillac Escalade. On this vehicle we cover documented systems include Rear View Camera, Side Blind Zone Alert (SBZA), and Forward Collision Alert / AEB, this GMT K2XX platform vehicle, GM PASS-Key III+ (K2XX Gen) immobilizer support, Cadillac CUE infotainment programming. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
VIN pos 4-8 identifies series/body/engine. GM WMI: 1GY (Cadillac). Position 8 = engine code. Position 10 = model year code.
Cadillac CUE
This 2017 Cadillac Escalade page documents 5 ADAS systems, including Rear View Camera, Side Blind Zone Alert (SBZA), Forward Collision Alert / AEB, and Lane Keep Assist / Lane Departure Warning (LKA/LDW).
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and Mirror Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 40 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 8 gateway, immobilizer, or key-security records for this 2017 Cadillac Escalade.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2017 Cadillac Escalade using the documented systems and module data on this page.
Choose a sectionForward Collision Alert, Automatic Emergency Braking, Side Blind Zone Alert, Rea - Available; Immobilizer: GM PASS-Key III+ (K2XX Gen) - Standard; Platform: GMT K2XX - Confirmed
Forward Collision Alert, Automatic Emergency Braking, Side Blind Zone Alert, Rear Cross-Traffic Alert, Lane Keep Assist (Driver Assistance Package), Surround Vision (Premier+)
VIN pos 4-8 identifies series/body/engine. GM WMI: 1GY (Cadillac). Position 8 = engine code. Position 10 = model year code.
Cadillac CUE; Cadillac CUE - 8-inch touchscreen, improved lamination 2017+; Android Auto added; Apple CarPlay; 4G LTE OnStar hotspot
CAN: GMLAN (HS-CAN + MS-CAN); LIN bus; OBD-II DLC Pin 6/14 HS-CAN 500kbps
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
GM GDS2 / GM Tech2Win / GM MDI 2
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
Documented module coverage for the 2017 Cadillac Escalade. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabSecure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabImmobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access.
Verify platform code matches when cross-referencing part numbers across model years.
Common Cadillac Escalade issues we resolve on this platform: Rear View Camera, Side Blind Zone Alert (SBZA), Forward Collision Alert / AEB, and Lane Keep Assist / Lane Departure Warning (LKA/LDW) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - GMT K2XX platform uses GMLAN (HS-CAN + MS-CAN); LIN bus; OBD-II DLC Pin 6/14 HS-CAN 500kbps. Key programming and immobilizer faults - GM PASS-Key III+ (K2XX Gen) immobilizer; all-keys-lost supported.
Forward Collision Alert, Automatic Emergency Braking, Side Blind Zone Alert, Rear Cross-Traffic Alert, Lane Keep Assist (Driver Assistance Package), Surround Vision (Premier+)
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | Static | YES | ~23234185 | |
| Side Blind Zone Alert (SBZA) | Side Radar | Radar | Static + Dynamic | YES | ~22823740 (L), ~22823741 (R) | |
| Forward Collision Alert / AEB | Front Radar | Radar | Static | YES | ~84030903 | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) | Forward Camera | Camera | Static | YES | ~84145630 | |
| Surround Vision (4-Camera) | Forward Camera | Camera | Static | YES | ~84010890 |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationGDS2 static calibration required for LKA camera after windshield R&R on 2017 equipped builds. Target placement per WSM. Front Surround Vision camera re-registration if camera disturbed during windshield removal.
GDS2 radar alignment required. Surround Vision front camera recalibration if camera removed. Inspect all brackets for deformation before calibration.
GDS2 SBZA initialization if sensors disturbed. Surround Vision rear camera recalibration if disturbed. All 4 surround cameras must be recalibrated together via J-49878 mat if any are replaced.
Surround Vision side cameras are integrated in door mirror housings. Full 4-camera surround view calibration required via GDS2 + J-49878 mat if mirror assembly with camera replaced.
Full scan mandatory. SDM replace-only. All disturbed ADAS sensors recalibrated before delivery. Do not clear SDM DTCs post-deployment without module replacement.
Blind spot monitoring sensor replacement requires calibration using GDS2/MDI2.
GM PASS-Key III+ with PKE - BCM-linked; GDS2 + TIS2WEB required
GM PASS-Key III+ (K2XX Gen) system. SPS/ACDelco TDS required for key programming and module replacement. Pin code extractable via obd; akl supported.
ADAS calibration pricing for a 2017 Cadillac Escalade depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Rear View Camera, Side Blind Zone Alert (SBZA), Forward Collision Alert / AEB, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Surround Vision (4-Camera). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2017 Cadillac Escalade uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 23381514. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2017 Cadillac Escalade, Rear View Camera, Forward Collision Alert / AEB, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Surround Vision (4-Camera) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
Most 2017 Cadillac Escalade onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 22 programmable modules documented in our database (2 ECU, 3 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2017 Cadillac Escalade. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2017 Cadillac Escalade is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Yes - all-keys-lost is supported on the 2017 Cadillac Escalade. Immobilizer generation on this platform: GM PASS-Key III+ (K2XX Gen). Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
We program, clone, repair, or replace the full programmable-module stack on a 2017 Cadillac Escalade. For this vehicle our database documents:
Infotainment on this platform: Cadillac CUE. Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2017 Cadillac Escalade covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.