ADAS coverage
This 2025 BMW I5 page documents 6 ADAS systems, including Forward Camera (Mobileye EyeQ5) - i5 KAFAS, Forward Radar (Continental ARS) - i5, Blind Spot Monitor (Continental SRR) - i5, and Rear View Camera - i5.
View ADAS data 3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2025 BMW I5 Supported Services
2025 BMW I5
ADAS calibration, module programming, and security relearns
Available in multiple trim/engine variants for the 2025 model year (Electric Vehicle - no combustion engine variants). Refer to the VIN for exact engine code and installed option packages (SA codes).
Technical snapshot
- Platform BMW CLAR (G60 platform, EV variant)
- CAN Architecture HS-CAN + CANFD + Ethernet; BMW E3 network architecture; OBD2 DLC Pin 6/14
- Security BMW Comfort Access PEPS; Digital Key Plus (UWB + NFC); BMW ID security
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 BMW I5. On this vehicle we cover documented systems include Forward Camera (Mobileye EyeQ5) - i5 KAFAS, Forward Radar (Continental ARS) - i5, and Blind Spot Monitor (Continental SRR) - i5, this BMW CLAR (G60 platform, EV variant) platform vehicle, BMW FEM/BDC PEPS; CAS5 module immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
BMW CLAR (G60 platform, EV variant)
Production
2024-present
Trim Levels
Available in multiple trim/engine variants for the 2025 model year (Electric Vehicle - no combustion engine variants). Refer to the VIN for exact engine code and installed option packages (SA codes).
Drivetrain
RWD / AWD
Engine
-
CAN Speed
HS-CAN + CANFD + Ethernet; BMW E3 network architecture; OBD2 DLC Pin 6/14
Exact-year service summary for 2025 BMW I5
Calibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair, HV Battery / SME Work, and ZSM Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 37 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 23 gateway, immobilizer, or key-security records for this 2025 BMW I5.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2025 BMW I5 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
BMW Driving Assistant Professional: Highway Assistant (hands-free L2), Active Cr - Available; Platform: BMW CLAR (G60 platform, EV variant) - Confirmed
Driver-assist suite
BMW Driving Assistant Professional: Highway Assistant (hands-free L2), Active Cruise Control with Stop and Go, Active Lane Change, Emergency Stop Assistant, Parking Assistant Professional
Infotainment context
BMW iDrive 8.5; 12.3-inch + 14.9-inch curved display; OTA updates
Network and access
CAN: HS-CAN + CANFD + Ethernet; BMW E3 network architecture; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
BMW ISTA-D / BMW ISTA-P
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2025 BMW I5. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
6 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
21 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
24 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
10 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
BMW Driving Assistant Professional: Highway Assistant (hands-free L2), Active Cr
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: BMW CLAR (G60 platform, EV variant)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common BMW I5 issues we resolve on this platform: Forward Camera (Mobileye EyeQ5) - i5 KAFAS, Forward Radar (Continental ARS) - i5, Blind Spot Monitor (Continental SRR) - i5, and Rear View Camera - i5 recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - BMW CLAR (G60 platform, EV variant) platform uses HS-CAN + CANFD + Ethernet; BMW E3 network architecture; OBD2 DLC Pin 6/14.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
BMW Driving Assistant Professional: Highway Assistant (hands-free L2), Active Cruise Control with Stop and Go, Active Lane Change, Emergency Stop Assistant, Parking Assistant Professional
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Mobileye EyeQ5) - i5 KAFAS | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS) - i5 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor (Continental SRR) - i5 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera - i5 | Rear Camera | Camera | Static | YES | - | |
| Surround View System (optional) - i5 | Surround Camera | Camera | None | YES | - | |
| Park Distance Control (PDC) - i5 | Ultrasonic | Ultrasonic | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: KAFAS 5, LDW, FCW, ACC, Highway Assistant Plus
iX-specific windshield only. KAFAS 5 static + dynamic via ISTA SPE procedure. OTA may have updated KAFAS 5 - confirm via ISTA ident. DTC 480B if incomplete.
Front Bumper Repair Affected: ADAS ECU front radar, ACC
iX SPE bumper bracket. ISTA iX radar alignment. Level surface. DTC 48A0.
HV Battery / SME Work Affected: SME, dual EME, OBC, IBS
Full HV safety protocol. ISTA-guided de-energization. xDrive50/M60 up to 800V. BMW HV technician mandatory. SME dual EME ISN sync. Battery calibration.
ZSM Replacement Affected: Immobilizer (dual EME ISN), Digital Key Plus UWB, all body functions
Full ISTA SPE coding. ISN sync with BOTH EME. Keys re-adapted. Digital Key Plus all entries re-provisioned. EtherBoot flash. BMW dealer auth required.
EME Replacement (Front or Rear) Affected: Drive motor, ZSM ISN, IBS regen
ISN to ZSM mandatory (dual sync). HV de-energization. ISTA SDP. IBS regen recalibration.
OTA Update Failure Affected: ZSM, EME, SME, ADAS ECU, MGU - all ZSM-networked modules
If OTA update fails, ISTA rollback may be required. Vehicle must be on AC power during OTA. Contact BMW dealer if OTA causes module DTCs or system warnings.
Any Collision Affected: ACSM, KAFAS 5, Radar, IBS, ZSM, HV battery housing
Full ISTA SPE scan mandatory. ACSM replace-only. HV housing inspection before re-energizing. 800V on xDrive50/M60. BMW BEV post-collision protocol.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use ISTA+.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using ISTA+.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ISTA+ if applicable.
SRS Modules
Advanced Crash Safety Module (ACSM) 24 records
Under center console
- Part number
- 65-77-5-B31-499
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65-77-5-B31-4A0
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65-77-5-B31-4A1
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 32-30-5-A24-4E6
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65-77-9-496-819
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-6-943-916
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65-77-5-A2D-769
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-6-943-919
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-6-943-920
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 07-12-9-904-870
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65-77-9-496-815
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-5-A04-C75
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-5-A04-C76
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65-77-9-496-820
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-5-A27-6D1
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-5-A27-6D2
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-9-418-713
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-9-418-714
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65-77-9-496-818
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 61-31-5-A33-2C4
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-5-A21-B33
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 72-12-5-A21-B34
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 51-43-9-496-586
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 07-14-9-272-649
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
ECU Modules
EME - Rear Axle Motor Electronics (iX 2024)
- Protocol / method
- ISTA SDP
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental / Bosch
- Notes
- ISN adaptation to ZSM mandatory. HV de-energization. ISTA SDP. IBS regen recalibration. BMW HV technician. Part number via EPC with 2024 iX VIN.
EME - Front Axle Motor Electronics (iX 2024)
- Protocol / method
- ISTA SDP
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental / Bosch
- Notes
- ISN adaptation to ZSM. HV de-energization. ISTA SDP. BMW HV technician. Part number via EPC.
SME - HV Battery Management (iX 2024)
- Protocol / method
- ISTA SDP
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- BMW / Continental
- Notes
- SME manages iX battery. ISTA coding + battery calibration. ISN adaptation to ZSM. HV de-energization. xDrive50/M60 up to 800V. BMW HV technician required. Part number via EPC with VIN.
BCM Modules
ZSM - Zonal Safety Module (iX 2024) 61359-9898020
- Part number
- 61359-9898020
- Security
- BMW ISN (ZSM SPE - dual EME)
- Coding required
- Yes
- Cloning supported
- No
- Notes
- ZSM on 2024 iX. ISN sync with both front and rear EME mandatory. EtherBoot SDP flash. Clone not supported. Full iX SPE ISTA coding. Digital Key Plus UWB tokens in ZSM. Verify 2024-specific part number via EPC.
TCU / TCM Transmission Modules
N/A - Single Speed / No TCU
- Protocol / method
- Virgin Flash
- Coding required
- No
- Cloning supported
- No
- Chip / MCU
- N/A
- Notes
- Pure electric vehicle with single-speed transmission, no traditional TCU present
N/A - Single Speed / No TCU
- Protocol / method
- Virgin
- Coding required
- No
- Cloning supported
- No
- Chip / MCU
- N/A
- Notes
- Pure electric vehicle with single-speed transmission, no traditional TCU present
ABS / Brake Modules
Integrated Brake System (IBS - iX 2024) 34526-9898040
- Part number
- 34526-9898040
- Cloning supported
- No
- Notes
- IBS brake-by-wire. ISTA coding. Steering angle recalibration. Dual EME xDrive adaptation. Regen-to-friction recalibration. HV safety check via ISTA before work. Part number approximate.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 62109898900
- Part number
- 62109898900
- Cloning supported
- Yes
- Notes
- G60 i5 CLAR EV Live Cockpit Pro
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (ZGM steering column)
Connectivity & Accessories
iDrive 8 SPE Curved Display (iX 2024) 65906-9898050
- Part number
- 65906-9898050
- Notes
- SPE-specific MGU. ISTA SDP coding. ZSM VIN adaptation. Full OTA capable.
BMW Digital Key Plus (UWB) - iX 2024
- Notes
- Standard on iX 2024. ZSM UWB. BMW app. Re-provision after ZSM replacement.
Bowers and Wilkins Diamond Surround Sound (optional)
- Notes
- ISTA coding after amplifier replacement. Option code SA688.
DC Fast Charging CCS (xDrive50: 200kW)
- Notes
- HV de-energization mandatory before charging system work. ISTA coding if charging module replaced.
Gateway / Security Modules
Central Gateway Module 21 records
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- R7F701057
- Notes
- Compatibility label: EVO. AMP Notes: Read/Write
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XET512
- Notes
- Compatibility label: 7 series F01. FRM-Foot Space
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E series. FRM-Foot Space Notes: Read/Write
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XDT256
- Notes
- Compatibility label: E70 AHL. FRM-Foot Space Notes: 0L15Y
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E70 VDM. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E70 XE. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E81 E82 E88 XE. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E87 BASIS. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E87 E92 E93 AHL. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E87 E92 E93 XE. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E89 E9X LED AHL. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E89 E9X LED XE. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E90 E91 LED BASIS. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XET512
- Notes
- Compatibility label: F series. FRM-Foot Space Notes: Read/Write
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XET512
- Notes
- Compatibility label: F18. FRM-Foot Space
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: MAX Brose. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: R56 HIGH EKS. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: R56 R56 HIGH EKS. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- FRM-Foot Space BMW E Serices Notes: 3M25J, free code
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- CAS4/CAS4+
- Notes
- Compatibility label: CAS4/CAS4+. CAS4/CAS4+
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384(3M25J)
- Notes
- Compatibility label: BMW E Serices. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel-aluminum mixed unibody; aluminum hood and trunk lid
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN + CANFD + Ethernet; BMW E3 network architecture; OBD2 DLC Pin 6/14
- Infotainment
- BMW iDrive 8.5; 12.3-inch + 14.9-inch curved display; OTA updates
- OTA Capable
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - bmw not in openpilot support tree
Not in openpilot support tree as of April 2026. BMW not in openpilot official tree. No community port has been merged.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2025 BMW I5?
ADAS calibration pricing for a 2025 BMW I5 depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Mobileye EyeQ5) - i5 KAFAS, Forward Radar (Continental ARS) - i5, Blind Spot Monitor (Continental SRR) - i5, Rear View Camera - i5, and Surround View System (optional) - i5. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2025 BMW I5?
Yes. The 2025 BMW I5 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 65-77-5-B31-499. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2025 BMW I5?
After windshield replacement on a 2025 BMW I5, Forward Camera (Mobileye EyeQ5) - i5 KAFAS, Forward Radar (Continental ARS) - i5, and Rear View Camera - i5 rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2025 BMW I5 module service take?
Most 2025 BMW I5 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 34 programmable modules documented in our database (3 ECU, 1 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2025 BMW I5 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2025 BMW I5. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2025 BMW I5 programming?
Every programming, cloning, and calibration job on the 2025 BMW I5 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2025 BMW I5 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2025 BMW I5. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 6 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2025 BMW I5 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 66515B52662, 66326878
- ECU / PCM Part Numbers
- 12369494, XDRIVE40 G60
- BCM / Body Module Part Numbers
- 61359-9898020
- SRS / Airbag Module Part Numbers
- 65-77-5-B31-499, 65-77-5-B31-4A0, 65-77-5-B31-4A1, 32-30-5-A24-4E6, 65-77-9-496-819, 72-12-6-943-916, 65-77-5-A2D-769, 72-12-6-943-919, 72-12-6-943-920, 07-12-9-904-870, 65-77-9-496-815, 72-12-5-A04-C75, 72-12-5-A04-C76, 65-77-9-496-820, 72-12-5-A27-6D1, 72-12-5-A27-6D2, 72-12-9-418-713, 72-12-9-418-714, 65-77-9-496-818, 61-31-5-A33-2C4, 72-12-5-A21-B33, 72-12-5-A21-B34, 51-43-9-496-586, 07-14-9-272-649
- ABS / EBCM Part Numbers
- 34526-9898040 (BMW IBS G60 I5 CLAR BEV BRAKE-BY-WIRE)
- Instrument Cluster (IPC) Part Numbers
- 62109898900 (G60 I5 CLAR EV LIVE COCKPIT PRO)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2025 BMW I5
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
BMW ISTA Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.