VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Bentley WMI: SCB. Position 4-6 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2020 Bentley Bentayga Supported Services
2020 Bentley Bentayga
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform MSB (Porsche Panamera-derived; VW Group)
- CAN Architecture MOST (optical), PT-CAN, Comfort-CAN, LIN, 48V power bus (eAWS), HV bus (PHEV only)
- Security VW Group factory-auth IMMO - ODIS online only; no aftermarket key programming
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Bentley Bentayga. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Side Assist (SWA) / Blind Spot Monitor, this MSB (Porsche Panamera-derived; VW Group) platform vehicle, VW Group factory-auth IMMO immobilizer support, Bentley Rotating Display infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
MSB (Porsche Panamera-derived; VW Group)
Production
2016-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
AWD
Engine
-
CAN Speed
MOST (optical), PT-CAN, Comfort-CAN, LIN, 48V power bus (eAWS), HV bus (PHEV only)
YEAR-SPECIFIC NOTES
Infotainment
Bentley Rotating Display
Wireless Support
CarPlay: Yes
Exact-year service summary for 2020 Bentley Bentayga
ADAS coverage
This 2020 Bentley Bentayga page documents 5 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Side Assist (SWA) / Blind Spot Monitor, and Surround View Camera System.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 19 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2020 Bentley Bentayga.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2020 Bentley Bentayga using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
PHEV V6 Hybrid (some 2020 builds) - Optional; 48V Active Anti-Roll System - Standard; Air Suspension (4-corner) - Standard
Driver-assist suite
Bentley Driver Assistance: Adaptive Cruise Control, Automatic Emergency Braking, Lane Assist, Traffic Sign, Side Assist, Surround View
VIN and build split
VIN pos 4-8 identifies model/body/engine. Bentley WMI: SCB. Position 4-6 = model code. Position 10 = model year code.
Infotainment context
Bentley Rotating Display; Bentley Rotating Display (MIB3-based); 12.3-inch; Apple CarPlay / Android Auto
Connectivity notes
Wireless CarPlay: Yes
Network and access
CAN: MOST (optical), PT-CAN, Comfort-CAN, LIN, 48V power bus (eAWS), HV bus (PHEV only)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
VW ODIS-S
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2020 Bentley Bentayga. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
5 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
10 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
PHEV V6 Hybrid (some 2020 builds)
OptionalHV battery pack under rear floor. Discharge HV bus before any battery-adjacent work. ODIS PHEV-specific calibrations required.
48V Active Anti-Roll System
StandardIntegrated with air suspension. ODIS coding after any chassis module replacement.
Air Suspension (4-corner)
StandardHeight sensors coded to VIN. ODIS recalibration required after sensor replacement.
WHAT WE RESOLVE
Common issues on this vehicle
Common Bentley Bentayga issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Side Assist (SWA) / Blind Spot Monitor, and Surround View Camera System recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - MSB (Porsche Panamera-derived; VW Group) platform uses MOST (optical), PT-CAN, Comfort-CAN, LIN, 48V power bus (eAWS), HV bus (PHEV only).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Bentley Driver Assistance: Adaptive Cruise Control, Automatic Emergency Braking, Lane Assist, Traffic Sign, Side Assist, Surround View
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | ~4N0907217 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | ~4H0907561 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Side Assist (SWA) / Blind Spot Monitor | Side Radar | Radar | Static + Dynamic | YES | ~4G0907541 (L), 4G0907543 (R) (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Surround View Camera System | Forward Camera | Camera | Static | YES | ~4N0980556 (FRONT) | |
| Park Distance Control (PDC) | Ultrasonic | Ultrasonic | None | YES | ~4H0919275 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Front Camera (Lane Assist, Traffic Sign, AEB)
ODIS static camera calibration required. OEM glass only. Online authorization mandatory.
Front Bumper Repair or Replacement Affected: Front Radar (ACC, AEB), Front PDC
ODIS radar alignment after front bumper work. Inspect radar bracket.
Rear Bumper Repair Affected: SWA Rear Radars, Rear PDC, Surround Camera (rear)
ODIS SWA initialization. Surround camera calibration if rear badge disturbed.
Any Collision Affected: ACM, Front Radar, Front Camera, SWA Radars, airbags and pretensioners
Full ODIS scan mandatory. ACM crash clear or replace. All ADAS sensors inspect and recalibrate. Factory authorization for ACM replacement.
PHEV Battery or HV System Work Affected: HV Battery BMS, PHEV Charger, ESC
HV discharge procedure mandatory before any battery-adjacent component removal. ODIS PHEV calibrations required after BMS or charger replacement.
Any Module Replacement Affected: All modules
ODIS online factory authorization required. No offline coding. Battery tender mandatory. Factory-only modules.
Forward Camera Replacement
Camera module replacement requires full recalibration using ODIS-S.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using ODIS-S.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
Mirror Replacement
Surround view mirror camera recalibration required after mirror R&R. Use ODIS-S.
SRS Modules
Airbag Control Module (ACM) 36A907651
- Part number
- 36A907651
- Location
- Under center console, floor tunnel
- Manufacturer
- Autoliv / Continental
- Chip / MCU
- Renesas R7F701xxx
- Notes
- ODIS crash clear and DTC reset. Hard deployment: replace if module physically deformed. New ACM requires ODIS online VIN coding and factory security token. Factory-only parts.
Occupant Detection System (ODS) 36A907651A
- Part number
- 36A907651A
- Location
- Passenger seat cushion
- Manufacturer
- IEE
- Chip / MCU
- N/A - sensor mat
- Notes
- ODIS ODS calibration after seat or mat replacement. OEM mat required.
SRS-ECU 36A907651
- Part number
- 36A907651
- Location
- Under center console, floor tunnel
- Chip / MCU
- 95320
- Notes
- OEM part 36A907651. Memory chip: 95320. Crash data clear supported.
SRS-ECU 36A907651A
- Part number
- 36A907651A
- Location
- Under center console, floor tunnel
- Chip / MCU
- 95320
- Notes
- OEM part 36A907651A. Memory chip: 95320. Crash data clear supported.
SRS-ECU 36A907651B
- Part number
- 36A907651B
- Location
- Under center console, floor tunnel
- Chip / MCU
- 95320
- Notes
- OEM part 36A907651B. Memory chip: 95320. Crash data clear supported.
ECU Modules
Engine Control Module - W12 6.0L biturbo ~4N0907115 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0907115 (VERIFY VIA ODIS VIN)
- Protocol / method
- ODIS Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 / Continental SIM
- Notes
- ODIS online flash with factory authorization. No clone. Battery tender required. Dual-bank throttle and fuel adaptations post-programming.
Engine Control Module - 4.0T V8 biturbo ~4N0907113 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0907113 (VERIFY VIA ODIS VIN)
- Protocol / method
- ODIS Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17.1
- Notes
- ODIS online flash. Audi-derived 4.0T. Not interchangeable with W12 ECM.
Hybrid Battery Management Module - V6 PHEV (if equipped) ~4N0915 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0915 (VERIFY VIA ODIS VIN)
- Protocol / method
- ODIS Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental HV BMS
- Notes
- PHEV variant only. HV battery safety precautions required - discharge HV bus before any battery-adjacent module work. ODIS online required. Factory-only module.
BCM Modules
GEM (Generic Electronic Module) ~4N0907064 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0907064 (VERIFY VIA ODIS VIN)
- Security
- vw_crypto
- Coding required
- Yes
- Cloning supported
- No
- Notes
- ODIS online authorization required. No clone support. Factory-only replacement. Online coding session 90-180 minutes. Battery tender required.
Door Control Module ~4N0959793, 4N0959794 (VERIFY VIA ODIS)
- Part number
- ~4N0959793, 4N0959794 (VERIFY VIA ODIS)
- Security
- vw_crypto
- Coding required
- Yes
- Cloning supported
- No
- Notes
- ODIS variant coding required. Soft-close mechanism coded to module. Window normalization post-coding.
TCU / TCM Transmission Modules
TCU - ZF 8HP90 8-Speed Auto 36A927156
- Part number
- 36A927156
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Infineon Tricore TC277
- Notes
- Requires Bentley ODIS-E or J2534 for programming. ZF Lifeguard 8 fluid. Mechatronic unit integrated TCU. VIN coding and adaptation mandatory. Security access required.
ABS / Brake Modules
ABS/ESC Module (Bosch iBooster + ESP) ~4N0614517 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0614517 (VERIFY VIA ODIS VIN)
- Cloning supported
- No
- Notes
- ODIS coding and automated bleed required. No clone support. Active chassis integration - air suspension and 48V eAWS must all be verified post-replacement. Steering angle sensor recalibration via ODIS.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 36A 920 790 A
- Part number
- 36A 920 790 A
- Cloning supported
- Yes
- Notes
- Digital Instrument Cluster (Bentayga 2nd gen MSB
Instrument Panel Cluster (IPC) PRE-FACELIFT 2016-2020
- Part number
- PRE-FACELIFT 2016-2020
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) 36A 907 637
- Part number
- 36A 907 637
- Coding required
- Yes
- Notes
- Static calibration after replacement using scan tool with steering-angle reset routine. Vehicle on level ground, wheels straight.
Connectivity & Accessories
MMI Infotainment Head Unit (MIB3) - Rotating Display ~4N0035821 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0035821 (VERIFY VIA ODIS VIN)
- Notes
- ODIS variant coding and online SVM. Online token required.
Digital Instrument Cluster (Virtual Cockpit) ~4N0920 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0920 (VERIFY VIA ODIS VIN)
- Notes
- ODIS VIN coding. Mileage transfer via ODIS. Factory-only replacement.
Air Suspension Control Module (ECAS) ~4N0616001 (VERIFY VIA ODIS)
- Part number
- ~4N0616001 (VERIFY VIA ODIS)
- Notes
- ODIS variant coding and ride height calibration. Height sensors coded to VIN.
PHEV High-Voltage Charger Module (if equipped) ~4N0959 (VERIFY VIA ODIS)
- Part number
- ~4N0959 (VERIFY VIA ODIS)
- Notes
- HV safety precautions. ODIS online required. Factory-only.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel and aluminum multi-material unibody; bespoke Bentley body panels
- OBD Protocol
- ISO 15765-4 CAN; UDS (ISO 14229); ODIS required for full access
- CAN Architecture
- MOST (optical), PT-CAN, Comfort-CAN, LIN, 48V power bus (eAWS), HV bus (PHEV only)
- Infotainment
- Bentley Rotating Display (MIB3-based); 12.3-inch; Apple CarPlay / Android Auto
- OTA Capable
- No
- Infotainment Name
- Bentley Rotating Display
- Wireless CarPlay
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2020 - 3.0L V6 Hybrid 24v (DCBE), 4.0L V8 32v (CZAC), 4.0L V8 32v (DCUA), 6.0L W12 36v (DDBD).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - bentley not in openpilot support tree
Not in openpilot support tree as of April 2026. Bentley not in openpilot support tree. Luxury brand not ported.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2020 Bentley Bentayga?
ADAS calibration pricing for a 2020 Bentley Bentayga depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Side Assist (SWA) / Blind Spot Monitor, Surround View Camera System, and Park Distance Control (PDC). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2020 Bentley Bentayga?
Yes. The 2020 Bentley Bentayga uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 36A907651. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2020 Bentley Bentayga?
After windshield replacement on a 2020 Bentley Bentayga, Forward Camera (Monocular), Forward Radar (77GHz), and Surround View Camera System rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2020 Bentley Bentayga module service take?
Most 2020 Bentley Bentayga onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 15 programmable modules documented in our database (3 ECU, 2 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2020 Bentley Bentayga on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2020 Bentley Bentayga. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2020 Bentley Bentayga programming?
Every programming, cloning, and calibration job on the 2020 Bentley Bentayga is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2020 Bentley Bentayga can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2020 Bentley Bentayga. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 2 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 5 ADAS module
Infotainment on this platform: Bentley Rotating Display. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2020 Bentley Bentayga covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 4N0907551, 4N0906026, 4N0906027
- BCM / Body Module Part Numbers
- ~4N0907064 (VERIFY VIA ODIS VIN), ~4N0959793, 4N0959794 (VERIFY VIA ODIS)
- TCU / TCM Part Numbers
- 36A927156
- SRS / Airbag Module Part Numbers
- 36A907651, 36A907651A, 36A907651B
- ABS / EBCM Part Numbers
- 4N0614517
- Instrument Cluster (IPC) Part Numbers
- 36A 920 790 A, PRE-FACELIFT 2016-2020)
- Transmission Control Module (TCM) Part Numbers
- 36A927156
- Steering Angle Sensor (SAS) Part Numbers
- 36A 907 637
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2020 Bentley Bentayga
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.