VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Bentley WMI: SCB. Position 4-6 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2019 Bentley Bentayga Supported Services
2019 Bentley Bentayga
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform MSB (Porsche Panamera-derived; VW Group)
- CAN Architecture MOST (optical infotainment bus), PT-CAN, Comfort-CAN, LIN, 48V power bus (eAWS)
- Security VW Group factory-authorization IMMO - ODIS online only; no aftermarket key programming
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 Bentley Bentayga. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Side Assist / Blind Spot Monitor (SWA), this MSB (Porsche Panamera-derived; VW Group) platform vehicle, VW Group factory-auth IMMO immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
MSB (Porsche Panamera-derived; VW Group)
Production
2016-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
AWD
Engine
-
CAN Speed
MOST (optical infotainment bus), PT-CAN, Comfort-CAN, LIN, 48V power bus (eAWS)
YEAR-SPECIFIC NOTES
Exact-year service summary for 2019 Bentley Bentayga
ADAS coverage
This 2019 Bentley Bentayga page documents 7 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Side Assist / Blind Spot Monitor (SWA), and Rear Cross-Traffic Alert.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Mirror Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 20 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2019 Bentley Bentayga.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 Bentley Bentayga using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
48V Electromechanical Active Wheel Steering (eAWS) - Standard; Active Air Suspension (4-corner) - Standard; AWD Torque Vectoring - Standard
Driver-assist suite
Bentley Driver Assistance: Adaptive Cruise Control, Automatic Emergency Braking, Lane Assist, Traffic Sign, Side Assist, Surround View, Night Vision (opt)
VIN and build split
VIN pos 4-8 identifies model/body/engine. Bentley WMI: SCB. Position 4-6 = model code. Position 10 = model year code.
Infotainment context
Bentley Rotating Display (MIB3-based); 12.3-inch; Apple CarPlay / Android Auto
Network and access
CAN: MOST (optical infotainment bus), PT-CAN, Comfort-CAN, LIN, 48V power bus (eAWS)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
VW ODIS-S
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2019 Bentley Bentayga. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
7 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
7 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
10 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 4
48V Electromechanical Active Wheel Steering (eAWS)
StandardIntegrated with air suspension control. Coding required via ODIS after chassis module replacement. Improves low-speed maneuverability and high-speed stability.
Active Air Suspension (4-corner)
StandardHeight sensors coded to VIN. ODIS recalibration required after sensor or module replacement. Offroad mode available.
AWD Torque Vectoring
StandardSport Differential - ODIS coding after replacement. Integrated with ESC.
ODIS Online Coding Requirement
mandatoryAll module replacements require online ODIS-E session with factory authorization. No offline coding supported. Bentley dealer network partnership required.
WHAT WE RESOLVE
Common issues on this vehicle
Common Bentley Bentayga issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Side Assist / Blind Spot Monitor (SWA), and Rear Cross-Traffic Alert recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - MSB (Porsche Panamera-derived; VW Group) platform uses MOST (optical infotainment bus), PT-CAN, Comfort-CAN, LIN, 48V power bus (eAWS).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Bentley Driver Assistance: Adaptive Cruise Control, Automatic Emergency Braking, Lane Assist, Traffic Sign, Side Assist, Surround View, Night Vision (opt)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | ~4N0907217 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | ~4H0907561 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Side Assist / Blind Spot Monitor (SWA) | Side Radar | Radar | Static + Dynamic | YES | ~4G0907541 (L), 4G0907543 (R) (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Rear Cross-Traffic Alert | Side Radar | Radar | None | YES | - | |
| Surround View / Top View Camera System | Forward Camera | Camera | Static | YES | ~4N0980556 (FRONT) | |
| Park Distance Control (PDC) | Ultrasonic | Ultrasonic | None | YES | ~4H0919275 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Night Vision (optional) | Forward Camera | Camera | Static | YES | ~4H0907217E (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Front Camera (Lane Assist, Traffic Sign Recognition, AEB)
ODIS static camera calibration required after windshield R&R. OEM Bentley glass only - bespoke rake angle. Online authorization required. Calibration target per WSM. Verify all lane assist DTCs clear post-calibration.
Front Bumper Repair or Replacement Affected: Front Radar (ACC, AEB), Front PDC Sensors, Night Vision Camera (if equipped)
ODIS radar alignment required after front bumper work. Inspect radar bracket for deformation. PDC sensor coding if sensors replaced. Night vision calibration if thermal camera disturbed.
Rear Bumper Repair or Replacement Affected: SWA Rear Radars (L/R), Rear PDC Sensors, Surround Camera (rear)
ODIS SWA initialization after rear bumper work. Rear surround camera (Bentley badge area) calibration if disturbed. PDC sensor coding if replaced.
Mirror Replacement Affected: Surround View Side Cameras (L/R)
ODIS surround camera static calibration required if mirror-mounted camera disturbed or mirror assembly replaced. Calibration mat procedure per WSM.
Any Collision Affected: ACM, Front Radar, Front Camera, SWA Radars, all deployed airbags and pretensioners
Full ODIS module scan mandatory after any collision. ACM crash clear or replacement depending on deployment. All ADAS sensors require physical inspection and recalibration. Do not clear DTCs without verifying sensor and module physical integrity. Factory authorization for ACM replacement.
Suspension or Chassis Work Affected: Air Suspension ECAS, 48V eAWS, Steering Angle Sensor, ESC/ESP, Radar (if height changed)
ODIS ride height recalibration after air suspension service. Steering angle sensor recalibration via ODIS. Front radar aim verification if ride height changed. 48V eAWS discharge procedure before actuator work.
Any Module Replacement Affected: All modules - ECM, GEM, ACM, ABS, MMI, Cluster, ECAS, eAWS
ODIS online factory authorization required for all module coding. No offline coding supported. Online session 60-180 minutes depending on module. Battery tender mandatory throughout. Factory-only modules - no aftermarket substitutes.
Forward Camera Replacement
Camera module replacement requires full recalibration using ODIS-S.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using ODIS-S.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
SRS Modules
Airbag Control Module (ACM) 1 record
- Part number
- 36A907655B
- Location
- Under center console, floor tunnel
- Manufacturer
- Autoliv / Continental
- Chip / MCU
- Renesas R7F701xxx
- Notes
- ODIS crash data clear and DTC reset. Hard frontal or side deployment - replace module if physically deformed; do not attempt crash clear on mechanically damaged unit. New ACM requires ODIS VIN coding and online security token. Factory-only replacement part - aftermarket ACMs not supported on Bentley. All pretensioners and impact sensors must be verified functional before delivery.
Occupant Detection System (ODS / seat sensor mat) 1 record
- Part number
- 36A907655C
- Location
- Passenger seat cushion
- Manufacturer
- IEE
- Chip / MCU
- N/A - sensor mat
- Notes
- ODIS ODS calibration required after passenger seat or sensor mat replacement. Mat must be OEM - Bentley seat construction is non-standard; aftermarket mats may not match calibration data.
Occupant Detection System (ODS) 1 record
- Notes
- Passenger seat ODS. ODIS calibration required after seat R&R.
ACM / SRS Module 3 records
Under center console, floor tunnel
- Part number
- 36A907655B
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 36A907655B. Also fits: 36A907655A. Memory chip: 93C76. Crash data clear supported.
Under center console, floor tunnel
- Part number
- 36A907655C
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 36A907655C. Memory chip: 93C76. Crash data clear supported.
Under center console, floor tunnel
- Part number
- 36A907655D
- Location
- Under center console, floor tunnel
- Chip / MCU
- 93C76
- Notes
- OEM part 36A907655D (verify fitment via VIN). Memory chip: 93C76. Crash data clear supported.
SRS Control Unit (variant) 1 record
- Part number
- 36A907655A
- Chip / MCU
- 93C76
ECU Modules
Engine Control Module - W12 6.0L biturbo ~4N0907115 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0907115 (VERIFY VIA ODIS VIN)
- Protocol / method
- ODIS Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17 / Continental SIM
- Notes
- ODIS online flash with factory authorization. No clone. Battery tender required. Dual-bank throttle and fuel adaptations post-programming.
Engine Control Module - 4.0T V8 biturbo ~4N0907113 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0907113 (VERIFY VIA ODIS VIN)
- Protocol / method
- ODIS Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MED17.1
- Notes
- ODIS online flash. Audi-derived 4.0T. Not interchangeable with W12 ECM.
Hybrid Battery Management Module - V6 PHEV (if equipped) ~4N0915 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0915 (VERIFY VIA ODIS VIN)
- Protocol / method
- ODIS Online
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental HV BMS
- Notes
- PHEV variant only. HV battery safety precautions required - discharge HV bus before any battery-adjacent module work. ODIS online required. Factory-only module.
BCM Modules
GEM (Generic Electronic Module) ~4N0907064 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0907064 (VERIFY VIA ODIS VIN)
- Security
- vw_crypto
- Coding required
- Yes
- Cloning supported
- No
- Notes
- ODIS online authorization required for VIN coding and variant coding. No clone support - factory-only replacement. GEM routes all major CAN buses. Online ODIS-E session required. Programming time 90-180 minutes. Battery tender required throughout.
Door Control Module (left front / right front / rear) ~4N0959793, 4N0959794 (VERIFY VIA ODIS)
- Part number
- ~4N0959793, 4N0959794 (VERIFY VIA ODIS)
- Security
- vw_crypto
- Coding required
- Yes
- Cloning supported
- No
- Notes
- ODIS variant coding required after door module replacement. Soft-close door mechanism coded to module. Window normalization required post-coding. Factory-only on Bentayga - aftermarket modules will not code.
TCU / TCM Transmission Modules
TCU - ZF 8HP90 8-Speed Auto 36A927156
- Part number
- 36A927156
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Infineon Tricore TC277
- Notes
- Requires Bentley ODIS-E or J2534 for programming. ZF Lifeguard 8 fluid. Mechatronic unit integrated TCU. VIN coding and adaptation mandatory. Security access required.
ABS / Brake Modules
ABS/ESC Module (Bosch iBooster + ESP) ~4N0614517 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0614517 (VERIFY VIA ODIS VIN)
- Cloning supported
- No
- Notes
- ODIS required for variant coding and automated bleed after replacement. No clone support on Bentayga ABS - factory module only. Active chassis (air suspension + 48V eAWS) integrates with ESP - all four systems must be verified operational post-replacement. Automated bleed cycle via ODIS service function. Steering angle sensor recalibration required via ODIS after ABS module replacement.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 36A 920 750 B
- Part number
- 36A 920 750 B
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (J527 clock spring/coil)
Connectivity & Accessories
MMI / Infotainment Head Unit (MIB3) ~4N0035821 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0035821 (VERIFY VIA ODIS VIN)
- Notes
- ODIS variant coding and online SVM required after head unit replacement. Online coding token required. Apple CarPlay / Android Auto coding via ODIS.
Digital Instrument Cluster (Virtual Cockpit) ~4N0920 (VERIFY VIA ODIS VIN)
- Part number
- ~4N0920 (VERIFY VIA ODIS VIN)
- Notes
- ODIS VIN coding required. Mileage transfer via ODIS. Full 12-inch virtual cockpit on Bentayga. Online authorization required. Factory-only replacement.
Air Suspension Control Module (ECAS) ~4N0616001 (VERIFY VIA ODIS)
- Part number
- ~4N0616001 (VERIFY VIA ODIS)
- Notes
- ODIS variant coding and ride height calibration required after module replacement. Four-corner air suspension - height sensors must be recalibrated to vehicle. Offroad mode coding must be verified.
48V Active Anti-Roll System (eAWS) ~4N0907379 (VERIFY VIA ODIS)
- Part number
- ~4N0907379 (VERIFY VIA ODIS)
- Notes
- 48V system - HV safety precautions required. ODIS coding and adaptation after module replacement. eAWS electromechanical active wheel steering - integrated with air suspension coding. Do not disconnect 48V actuators without discharge procedure.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel and aluminum multi-material unibody; bespoke Bentley body panels
- OBD Protocol
- ISO 15765-4 CAN; UDS (ISO 14229); ODIS required for full access
- CAN Architecture
- MOST (optical infotainment bus), PT-CAN, Comfort-CAN, LIN, 48V power bus (eAWS)
- Infotainment
- Bentley Rotating Display (MIB3-based); 12.3-inch; Apple CarPlay / Android Auto
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2019 - 3.0L V6 Hybrid 24v (DCBE), 4.0L V8 32v (CZAC), 4.0L V8 32v (DCUA), 6.0L W12 36v (DDBD).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2019 Bentley Bentayga?
ADAS calibration pricing for a 2019 Bentley Bentayga depends on which of its 7 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Side Assist / Blind Spot Monitor (SWA), Rear Cross-Traffic Alert, and Surround View / Top View Camera System. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2019 Bentley Bentayga?
Yes. The 2019 Bentley Bentayga uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 36A907655B. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2019 Bentley Bentayga?
After windshield replacement on a 2019 Bentley Bentayga, Forward Camera (Monocular), Forward Radar (77GHz), and Surround View / Top View Camera System rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2019 Bentley Bentayga module service take?
Most 2019 Bentley Bentayga onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (3 ECU, 2 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2019 Bentley Bentayga on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2019 Bentley Bentayga. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2019 Bentley Bentayga programming?
Every programming, cloning, and calibration job on the 2019 Bentley Bentayga is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2019 Bentley Bentayga can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2019 Bentley Bentayga. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 7 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2019 Bentley Bentayga covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 4W0 907 107 B
- ECU / PCM Part Numbers
- 4W0 907 115 B
- BCM / Body Module Part Numbers
- ~4N0907064 (VERIFY VIA ODIS VIN), ~4N0959793, 4N0959794 (VERIFY VIA ODIS)
- TCU / TCM Part Numbers
- 36A927156
- SRS / Airbag Module Part Numbers
- 36A 959 655 B
- ABS / EBCM Part Numbers
- 4W0 614 517 B
- Instrument Cluster (IPC) Part Numbers
- 36A 920 750 B
- Transmission Control Module (TCM) Part Numbers
- 36A927156
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (J527 CLOCK SPRING
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2019 Bentley Bentayga
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.