VIN / Build Split
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2013 Audi A4 Supported Services
2013 Audi A4
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform B8 (5th Gen, 2009-2016)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Audi Megamos Crypto ID48 (3DES encrypted transponder, PCF7947); HU66 high-security blade; component protection via ODIS; AKL requires ODIS + Audi/VW Group dealer authorization + component release
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2013 Audi A4. On this vehicle we cover documented systems include Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), and Lane Departure Warning / Active Lane Assist, this B8 (5th Gen, 2009-2016) platform vehicle, MQB/MLB IMMO immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
B8 (5th Gen, 2009-2016)
Production
2009-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES
Exact-year service summary for 2013 Audi A4
ADAS coverage
This 2013 Audi A4 page documents 4 ADAS systems, including Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), Lane Departure Warning / Active Lane Assist, and Rear View Camera.
View ADAS dataCalibration triggers
Documented calibration triggers include ECM Replacement, ABS/ESC Module Replacement, Windshield Replacement, and Forward Camera Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 20 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 6 gateway, immobilizer, or key-security records for this 2013 Audi A4.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2013 Audi A4 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Platform: B8 (5th Gen, 2009-2016) - Confirmed
Driver-assist suite
No standard ADAS suite - pre-Pre Sense generation. Optional Audi Pre Sense Front and Adaptive Cruise Control on upper trims.
VIN and build split
VIN pos 4-6 identifies model. Audi WMI: WAU, WA1, WAG. Position 4-6 = model code. Position 10 = model year code.
Infotainment context
Audi MMI 3G+ (7" retractable display); Bluetooth; USB; SD card; Google Earth navigation
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
VW ODIS-S / ODIS-E / Audi VAS 6154
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2013 Audi A4. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
1 module documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
3 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
3 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
8 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
5 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 1
Platform: B8 (5th Gen, 2009-2016)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Audi A4 issues we resolve on this platform: Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), Lane Departure Warning / Active Lane Assist, and Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - B8 (5th Gen, 2009-2016) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No standard ADAS suite - pre-Pre Sense generation. Optional Audi Pre Sense Front and Adaptive Cruise Control on upper trims.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Audi Pre-Sense Plus - Forward Camera (Pre-Sense City) | Forward Camera | Camera | Static | YES | 4G0-907-217-C | |
| Audi Pre-Sense Plus - Front Radar (77GHz) | Front Radar | Radar | Static | YES | 4G0-907-561-A | |
| Lane Departure Warning / Active Lane Assist | Forward Camera | Camera | Static | YES | 4G0-907-217-C | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
ODIS SVM coding (online) mandatory. Engine adaptation reset.
ABS/ESC Module Replacement
ODIS basic settings + brake bleed procedure.
Windshield Replacement
Forward camera recalibration required after windshield R&R. ODIS-S guided static calibration.
Forward Camera Replacement
Camera module replacement requires full recalibration using ODIS-S.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using ODIS-S.
SRS Modules
Airbag Control Unit (ACU) 8 records
Under center console
- Part number
- 8K0 959 655 N (5WK44637)
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95640
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Under center console
- Part number
- 8K0-959-655
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95320
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Under center console
- Part number
- 8K0-959-655-F
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95320
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Under center console
- Part number
- 8K0-959-655-G
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95640
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Under center console
- Part number
- 8K0-959-655-J
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95640
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Under center console
- Part number
- 8K0-959-655-K
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95640
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Under center console
- Part number
- 8K0-959-655-L
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95640
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
Under center console
- Part number
- 8K0-959-655-P
- Location
- Under center console
- Manufacturer
- Continental
- Chip / MCU
- 95640
- Notes
- Requires VCDS or ODIS for coding and adaptation. Gateway access control may require online login. Battery disconnect 90 seconds before removal.
ECU Modules
ECM (J623) - 2.0L TFSI I4 / 3.2L FSI V6 (pre-2009) / 2.0L TDI
- Notes
- Audi A4 ECM. ODIS SVM online coding required.
BCM Modules
BCM - Body Control Module (J519/J527)
- Notes
- VW/Audi BCM. ODIS coding after replacement. Variant coding required.
TCU / TCM Transmission Modules
TCU - 0B5 S tronic 7-Speed DSG 0B5927156
- Part number
- 0B5927156
- Protocol / method
- OBD
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Bosch TC1797
- Notes
- DL501 7-speed DSG, requires VCDS/ODIS coding, adaptation reset, clutch relearn via service mode
TCU - CVT Multitronic 8K1927156
- Part number
- 8K1927156
- Protocol / method
- OBD
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental MPC5554
- Notes
- CVT transmission, requires original TCU, chain position relearn, CVT fluid specification G 052 516 A2
TCU - 0AW Tiptronic 8-Speed Auto 0AW927156
- Part number
- 0AW927156
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Bosch TC1797
- Notes
- ZF 8HP transmission, adaptation reset required, ATF spec ZF Lifeguard Fluid 8, pressure test recommended
ABS / Brake Modules
ABS/ESC Module (J104)
- Notes
- VW/Audi ABS/ESC. ODIS coding + brake bleeding procedure.
Wheel Speed Sensor - Front (each)
- Notes
- Active. Replace if DTC 01130/01131.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 8K0 920 930 K, 8K0 920 950 K
- Part number
- 8K0 920 930 K, 8K0 920 950 K
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (J527 clock spring/coil)
Connectivity & Accessories
Virtual Cockpit Plus 8W2-920
- Part number
- 8W2-920
- Notes
- our diagnostic software SVM coding required. VIN-coded. 12.3-inch TFT.
MMI Touch (MIB3) 8W2-035
- Part number
- 8W2-035
- Notes
- our diagnostic software SVM coding required. OTA capable on connected builds. Apple CarPlay / Android Auto standard.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- STMicroelectronics
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- ST10F269
- Notes
- AMP Notes: Read/Write
Central Gateway Module
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3380
- Notes
- Compatibility label: A4/A5/Q5. BCM Notes: Read/Write
Central Gateway Module
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- D70F3548 2018
- Notes
- Compatibility label: A4L. Headlight modules Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- MLB Evo unibody; steel and aluminum composite; B9.5 facelift (international carry-over / final B9 generation)
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Audi MMI 3G+ (7" retractable display); Bluetooth; USB; SD card; Google Earth navigation
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2013 - 1.8L TFSI, 1.8L TFSI (CABA), 1.8L TFSI (CABB), 1.8L TFSI (CDHA), 1.8L TFSI (CDHB), 1.8L TFSI (CJEB), 1.8L Turbo (CCU), 1.8L Turbo (CEA), 2.0L 16v TFSI, 2.0L TDI (CAGA), 2.0L TDI (CAGB), 2.0L TDI (CAGC), 2.0L TDI (CAHA), 2.0L TDI (CAHB), 2.0L TDI (CNHA), 2.0L TDI CR (CGLC), 2.0L TDI CR (CGLD), 2.0L TDI CR (CJCA), 2.0L TDI CR (CJCB), 2.0L TDI CR (CJCC), 2.0L TDI CR (CJCD), 2.0L TDI CR (CMFA), 2.0L TDI CR (CMFB), 2.0L TDI CR (CNHC), 2.0L TDI CR (CSUA), 2.0L TDI CR (CSUB), 2.0L TDI CR (DEU), 2.0L TFSI (CAEA), 2.0L TFSI (CAEB), 2.0L TFSI (CDNB), 2.0L TFSI (CDNC), 2.0L TFSI (CFKA), 2.0L TFSI (CNCB), 2.0L TFSI (CNCD), 2.0L TFSI Flexible Fuel quattro (CPMA), 2.0L TFSI flexible fuel (CFKA), 2.7L TDI (CAMA), 2.7L TDI (CAMB), 2.7L TDI (CGKA), 2.7L TDI (CGKB), 3.0L T quattro (CHMA), 3.0L TDI CR (CCLA), 3.0L TDI CR (CKVC), 3.0L TDI CR (CLAB), 3.0L TDI CR (CVKC), 3.0L TDI Quattro (BKN), 3.0L TDI quattro (CAPA), 3.0L TDI quattro (CCWA), 3.0L TFSI (CMUA), 3.0L TFSI quattro (CRED), 3.0L V6 TDI (CR) (CDUC), 3.0L V6 TDI (CR) (CKVB), 3.0L V6 TDI quattro (CCWB), 3.2L FSI (CALA).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2013 Audi A4?
ADAS calibration pricing for a 2013 Audi A4 depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Audi Pre-Sense Plus - Front Radar (77GHz), Lane Departure Warning / Active Lane Assist, and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2013 Audi A4?
Yes. The 2013 Audi A4 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 8K0 959 655 N (5WK44637). Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2013 Audi A4?
After windshield replacement on a 2013 Audi A4, Audi Pre-Sense Plus - Forward Camera (Pre-Sense City), Lane Departure Warning / Active Lane Assist, and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2013 Audi A4 module service take?
Most 2013 Audi A4 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 16 programmable modules documented in our database (1 ECU, 1 BCM, 3 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2013 Audi A4 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2013 Audi A4. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2013 Audi A4 programming?
Every programming, cloning, and calibration job on the 2013 Audi A4 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2013 Audi A4 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2013 Audi A4. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 3 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 4 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2013 Audi A4 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 8R0 907 107 B
- ECU / PCM Part Numbers
- 8K0 907 115 M, 8K0 907 115 N
- BCM / Body Module Part Numbers
- 8K0 907 063 G, 8K0 907 064 G
- TCU / TCM Part Numbers
- 0B5927156, 8K1927156, 0AW927156
- SRS / Airbag Module Part Numbers
- 8K0 959 655 N (5WK44637), 8K0-959-655, 8K0-959-655-F, 8K0-959-655-G, 8K0-959-655-J, 8K0-959-655-K, 8K0-959-655-L, 8K0-959-655-P
- ABS / EBCM Part Numbers
- 8K0 614 517 BG, 8K0 614 517 BH
- Instrument Cluster (IPC) Part Numbers
- 8K0 920 930 K, 8K0 920 950 K
- Transmission Control Module (TCM) Part Numbers
- 0B5927156, 8K1927156, 0AW927156
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (J527 CLOCK SPRING
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2013 Audi A4
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
ODIS-S Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.