Choose year/make/model, or paste a VIN to start a quote.
ADAS calibration, module programming, and security relearns
Available in multiple trim levels and engine configurations for 2016. Confirm PR codes via ETKA or ODIS to identify installed driver-assistance packages.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2016 Audi A3. On this vehicle we cover documented systems include Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), and Blind Spot Monitor - Left Radar (Continental SRR), this Volkswagen MQB (A3 8V platform, Gen 3) platform vehicle, Audi KESSY PEPS; VW Group security gateway; rolling code AES-128 immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
This 2016 Audi A3 page documents 6 ADAS systems, including Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), and Blind Spot Monitor - Right Radar (Continental SRR).
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Any Collision, and Any Module Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 22 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 5 gateway, immobilizer, or key-security records for this 2016 Audi A3.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2016 Audi A3 using the documented systems and module data on this page.
Choose a sectionAudi Pre Sense City/Front/Rear - Available; Immobilizer: Audi KESSY PEPS - Standard; Platform: Volkswagen MQB (A3 8V platform, Gen 3) - Confirmed
Audi Pre Sense City/Front/Rear; Adaptive Cruise Assist (2022+); Side Assist (Blind Spot Monitoring); Lane Assist; Park Assist
Audi MMI 7" navigation display; virtual cockpit optional
CAN: HS-CAN (500 kbps); VW Group MQB network; OBD2 DLC Pin 6/14
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
VW ODIS-S / ODIS-E / Audi VAS 6154
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
Documented module coverage for the 2016 Audi A3. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabSecure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabImmobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Verify platform code matches when cross-referencing part numbers across model years.
Common Audi A3 issues we resolve on this platform: Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), and Blind Spot Monitor - Right Radar (Continental SRR) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Volkswagen MQB (A3 8V platform, Gen 3) platform uses HS-CAN (500 kbps); VW Group MQB network; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - Audi KESSY PEPS; VW Group security gateway; rolling code AES-128 immobilizer; add-key procedure.
Audi Pre Sense City/Front/Rear; Adaptive Cruise Assist (2022+); Side Assist (Blind Spot Monitoring); Lane Assist; Park Assist
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Mobileye EyeQ4) | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Radar (Continental SRR) | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Radar (Continental SRR) | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Front & Rear | Parking Sensor | Ultrasonic | None | YES | - |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationour diagnostic software static target calibration required. B9.5 EyeQ4 procedure. Work order first, SVM after pass. OEM glass only.
ARS510 static calibration using our diagnostic software. Inspect radar bracket. Park sensor our diagnostic software adaptation if replaced.
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. ADAS recalibration. SVM on all replaced modules.
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC >80%.
BSD radar alignment required after rear bumper R&R. Use ODIS-S.
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ODIS-S if applicable.
Audi Advanced Key (KESSY PEPS); rolling code; ODIS-S
Audi KESSY PEPS; VW Group security gateway; rolling code AES-128 system. ODIS required for key programming and module replacement. No obd pin extraction; akl supported.
ADAS calibration pricing for a 2016 Audi A3 depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), Blind Spot Monitor - Right Radar (Continental SRR), and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2016 Audi A3 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 8P0959655D. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2016 Audi A3, Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
Most 2016 Audi A3 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 16 programmable modules documented in our database (1 ECU, 2 BCM, 3 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2016 Audi A3. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2016 Audi A3 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Yes, our key programming specialists handle all-keys-lost scenarios on the 2016 Audi A3. Immobilizer generation on this platform: Audi KESSY PEPS; VW Group security gateway; rolling code AES-128. Submit the VIN and we will confirm the procedure and quote before scheduling.
We program, clone, repair, or replace the full programmable-module stack on a 2016 Audi A3. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2016 Audi A3 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.