Forward Collision Warning, Lane Departure Warning, Adaptive Cruise Control (opti
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065Covers model years 2018-2026 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Alfa Romeo Stelvio built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
The ADAS, module, and security rows below are consolidated across the full 2018-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2018-2026”.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Alfa Romeo Stelvio. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitoring (BSM) - Rear Radar, this Tipo 949 (Giorgio platform SUV variant - shares architecture with Giulia Tipo 952) platform vehicle, Alfa IMMO3 immobilizer support, Uconnect 4C infotainment programming. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access.
Verify platform code matches when cross-referencing part numbers across model years.
Verify platform code matches when cross-referencing part numbers across model years.
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
This platform uses Alfa Romeo CAN bus (FCA CAN); LIN for body subsystems; MOST for infotainment with ISO 15765-4 CAN (500 kbps); UDS (ISO 14229); MultiEcuScan / Examiner access.
This page consolidates Alfa Romeo Stelvio service data for 2018-2026 across 9 model years; 9 years have merged CCT data.
Choose a yearMerged ADAS coverage includes 16 system records, including Forward Camera (Monocular) (2018), Forward Radar (77GHz) (2018), Blind Spot Monitoring (BSM) - Rear Radar (2018), and Forward Collision Warning / LDW - Front Camera (2019). Year-marked systems apply only to the shown range.
View ADAS dataThis generation has 26 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersThe merged generation page indexes 49 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway, immobilizer, and key-security coverage includes 6 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Alfa Romeo Stelvio 2018-2026 span, with exact-year validation before service.
Get a quoterequired
MultiEcuScan or Examiner static calibration required. Level surface, target at approx. 2.5-3m. OEM glass only. 2018 Stelvio uses EyeQ3 - do NOT substitute EyeQ4. Stelvio-specific camera part.
required
MultiEcuScan or Examiner static calibration required. Level surface, target at approx. 2.5-3m. OEM glass only. 2018 Stelvio uses EyeQ3 - do NOT substitute EyeQ4. Stelvio-specific camera part.
required
MultiEcuScan static calibration. OEM glass only. EyeQ3 - Stelvio-specific part.
required
MultiEcuScan static calibration. CRITICAL: 2020+ uses EyeQ4 - do NOT substitute EyeQ3. OEM glass only. Target at approx. 2.5-3m.
required
MultiEcuScan static calibration. CRITICAL: 2020+ uses EyeQ4 - do NOT substitute EyeQ3. OEM glass only. Target at approx. 2.5-3m.
required
MultiEcuScan static calibration. OEM glass only.
required
MultiEcuScan static calibration. OEM glass only. Target at approx. 2.5-3m.
required
MultiEcuScan radar alignment after front bumper work. Stelvio-specific radar part. Inspect mounting bracket.
required
MultiEcuScan radar alignment after front bumper work. Stelvio-specific radar part. Inspect mounting bracket.
required
MultiEcuScan radar alignment after front bumper work. Stelvio-specific radar part. Inspect mounting bracket.
required
MultiEcuScan BSM initialization. Functional test. Stelvio-specific BSM parts.
required
MultiEcuScan BSM initialization. Functional test. Stelvio-specific BSM parts.
required
Full MultiEcuScan scan. ACM crash clear or replace. Recalibrate all ADAS. Confirm Stelvio-specific part numbers before ordering replacements.
required
Full MultiEcuScan scan. ACM crash clear or replace. Recalibrate all ADAS. Confirm Stelvio-specific part numbers before ordering replacements.
required
Full MultiEcuScan scan. ACM crash clear or replace. Recalibrate all ADAS. Confirm Stelvio-specific part numbers before ordering replacements.
required
Full MultiEcuScan scan. ACM clear or replace. Recalibrate ADAS.
required
Full MultiEcuScan scan. ACM clear or replace. Recalibrate ADAS.
required
MultiEcuScan VIN coding and IMMO3 adaptation. Confirm Stelvio-specific parts via Alfa EPC - do not substitute Giulia parts.
required
MultiEcuScan VIN coding and IMMO3 adaptation. Confirm Stelvio-specific parts via Alfa EPC - do not substitute Giulia parts.
required
MultiEcuScan VIN coding and IMMO3 adaptation. Confirm Stelvio-specific parts via Alfa EPC - do not substitute Giulia parts.
required
MultiEcuScan VIN coding and IMMO3 adaptation. Confirm Stelvio-specific parts via Alfa EPC - do not substitute Giulia parts.
required
MultiEcuScan VIN coding and IMMO3. Use Stelvio-specific parts.
required
MultiEcuScan VIN coding and IMMO3. Use Stelvio-specific parts.
required
MultiEcuScan VIN coding and IMMO3. Use Stelvio-specific parts.
required
MultiEcuScan VIN coding and IMMO3. Use Stelvio-specific parts.
required
MultiEcuScan VIN coding and IMMO3. Stelvio-specific parts.
required
MultiEcuScan VIN coding and IMMO3. Stelvio-specific parts.
required
MultiEcuScan VIN coding and IMMO3. Stelvio-specific parts.
required
MultiEcuScan VIN coding and IMMO3. Stelvio-specific parts.
required
MultiEcuScan VIN coding and IMMO3.
required
MultiEcuScan VIN coding and IMMO3.
required
MultiEcuScan VIN coding and IMMO3.
required
MultiEcuScan VIN coding and IMMO3.
Yes
Camera module replacement requires full recalibration using OEM scan tool.
Yes
Camera module replacement requires full recalibration using OEM scan tool.
Yes
Radar module replacement requires alignment/calibration using OEM scan tool.
Yes
Radar module replacement requires alignment/calibration using OEM scan tool.
Yes
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
Yes
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
Conditional
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use OEM scan tool if applicable.
Conditional
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use OEM scan tool if applicable.
required
MultiEcuScan radar alignment. Stelvio-specific part.
required
MultiEcuScan radar alignment. Stelvio-specific part.
required
MultiEcuScan radar alignment.
required
MultiEcuScan radar alignment.
required
MultiEcuScan radar alignment.
required
MultiEcuScan radar alignment.
required
MultiEcuScan radar alignment.
required
MultiEcuScan BSM initialization. Functional test.
required
MultiEcuScan BSM initialization.
| Year | VIN split | Infotainment | Wireless CarPlay | Wireless Android Auto | Trim notes |
|---|---|---|---|---|---|
| 2018 | VIN pos 4-8 identifies model/body/engine. Alfa Romeo WMI: ZAR. Position 4-6 = model code. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2019 | VIN pos 4-8 identifies model/body/engine. Alfa Romeo WMI: ZAR. Position 4-6 = model code. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2020 | VIN pos 4-8 identifies model/body/engine. Alfa Romeo WMI: ZAR. Position 4-6 = model code. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2021 | VIN pos 4-8 identifies model/body/engine. Alfa Romeo WMI: ZAR. Position 4-6 = model code. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2022 | VIN pos 4-8 identifies model/body/engine. Alfa Romeo WMI: ZAR. Position 4-6 = model code. Position 10 = model year code. | Uconnect 5 | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2023 | VIN pos 4-8 identifies model/body/engine. Alfa Romeo WMI: ZAR. Position 4-6 = model code. Position 10 = model year code. | Uconnect 5 | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2024 | VIN pos 4-8 identifies model/body/engine. Alfa Romeo WMI: ZAR. Position 4-6 = model code. Position 10 = model year code. | Uconnect 5 | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2025 | VIN pos 4-8 identifies model/body/engine. Alfa Romeo WMI: ZAR. Position 4-6 = model code. Position 10 = model year code. | Uconnect 5 | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2026 | VIN pos 4-8 identifies model/body/engine. Alfa Romeo WMI: ZAR. Position 4-6 = model code. Position 10 = model year code. | Uconnect 5 | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
16 ADAS systems documented across 2018-2026. Rows that apply to only part of the generation carry a year badge.
Forward Collision Warning, Lane Departure Warning, Adaptive Cruise Control (optional), Blind Spot Monitoring (optional), Lane Keeping Assist (optional); Mobileye EyeQ3 (2018)
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) 2018 | Forward Camera | Camera | Static | YES | ~68287832AA (STELVIO-SPECIFIC - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) 2018 | Front Radar | Radar | Static | YES | ~68302484AA (STELVIO-SPECIFIC - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitoring (BSM) - Rear Radar 2018 | Side Radar | Radar | Static + Dynamic | YES | ~68287732AA (L), 68287733AA (R) (STELVIO-SPECIFIC - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Collision Warning / LDW - Front Camera 2019 | Forward Camera | Camera | Static | YES | ~68287832AA (STELVIO - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) 2019 | Front Radar | Radar | Static | YES | ~68302484AA (STELVIO - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor (BSM) 2019 | Side Radar | Radar | Static + Dynamic | YES | ~68287732AA (L), 68287733AA (R) (STELVIO) | |
| Forward Camera (Monocular) 2020 | Forward Camera | Camera | Static | YES | ~68415997AA (STELVIO EYEQ4 2020 | |
| Forward Radar (77GHz) 2020-2024 | Front Radar | Radar | Static | YES | ~68302484AA (STELVIO - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor (BSM) 2020-2024 | Side Radar | Radar | Static + Dynamic | YES | ~68287732AA (L), 68287733AA (R) | |
| Lane Keep Assist (LKA) - available 2020+ 2020 | Forward Camera | Camera | Static | YES | PROCESSED BY EYEQ4 CAMERA | |
| Forward Camera (Monocular) 2021 | Forward Camera | Camera | Static | YES | ~68415997AA (STELVIO EYEQ4 - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Camera (Monocular) 2022-2023 | Forward Camera | Camera | Static | YES | ~68415997AA (STELVIO EYEQ4 - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Camera (Monocular) 2024 | Forward Camera | Camera | Static | YES | ~68415997AA (STELVIO EYEQ4 - VERIFY 2024 SUFFIX VIA MULTIECUSCAN) | |
| Forward Camera (Monocular) 2025-2026 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (77GHz) 2025-2026 | Front Radar | Radar | Static | YES | - | |
| Blind Spot Monitor (BSM) 2025-2026 | Side Radar | Radar | Static + Dynamic | YES | - |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationMultiEcuScan or Examiner static calibration required. Level surface, target at approx. 2.5-3m. OEM glass only. 2018 Stelvio uses EyeQ3 - do NOT substitute EyeQ4. Stelvio-specific camera part.
MultiEcuScan radar alignment after front bumper work. Stelvio-specific radar part. Inspect mounting bracket.
MultiEcuScan BSM initialization. Functional test. Stelvio-specific BSM parts.
Full MultiEcuScan scan. ACM crash clear or replace. Recalibrate all ADAS. Confirm Stelvio-specific part numbers before ordering replacements.
MultiEcuScan VIN coding and IMMO3 adaptation. Confirm Stelvio-specific parts via Alfa EPC - do not substitute Giulia parts.
Camera module replacement requires full recalibration using OEM scan tool.
Radar module replacement requires alignment/calibration using OEM scan tool.
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use OEM scan tool if applicable.
MultiEcuScan static calibration. OEM glass only. EyeQ3 - Stelvio-specific part.
MultiEcuScan radar alignment. Stelvio-specific part.
MultiEcuScan BSM initialization. Functional test.
Full MultiEcuScan scan. ACM clear or replace. Recalibrate ADAS.
MultiEcuScan VIN coding and IMMO3. Use Stelvio-specific parts.
MultiEcuScan static calibration. CRITICAL: 2020+ uses EyeQ4 - do NOT substitute EyeQ3. OEM glass only. Target at approx. 2.5-3m.
MultiEcuScan radar alignment.
Camera module replacement requires full recalibration using OEM scan tool.
Radar module replacement requires alignment/calibration using OEM scan tool.
Blind spot monitoring sensor replacement requires calibration using OEM scan tool.
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use OEM scan tool if applicable.
MultiEcuScan static calibration. OEM glass only.
MultiEcuScan radar alignment.
MultiEcuScan VIN coding and IMMO3. Stelvio-specific parts.
MultiEcuScan BSM initialization.
MultiEcuScan VIN coding and IMMO3.
MultiEcuScan static calibration. OEM glass only. Target at approx. 2.5-3m.
49 documented Alfa Romeo Stelvio modules across 2018-2026. Open a group for part numbers, programming protocol, security notes, and clone support.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020-2023 for this generation
Compatible donor years: 2020, 2021, 2022, 2023
Always match the full part number before buying a used module.
_years covers only 2024-2025 for this generation
Compatible donor years: 2024, 2025
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family ~68364278AA (STELVIO - VERIFY VIA MULTIECUSCAN VIN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family ~68364280AA (STELVIO QF - VERIFY VIA MULTIECUSCAN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family ~68364278AA (STELVIO - VERIFY VIA MULTIECUSCAN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2026 for this generation
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family ~68364278AA (STELVIO - VERIFY VIA MULTIECUSCAN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family ~68364280AA (STELVIO QF - VERIFY VIA MULTIECUSCAN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2023 for this generation
Compatible donor years: 2020, 2021, 2022, 2023
Donor must match part family ~68364280AA (STELVIO QF - VERIFY VIA MULTIECUSCAN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Donor must match part family ~68364280AA (STELVIO QF 2024 - VERIFY VIA MULTIECUSCAN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family ~68364260AA (STELVIO - VERIFY VIA MULTIECUSCAN VIN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family ~68364260AA (STELVIO - VERIFY VIA MULTIECUSCAN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2026 for this generation
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family ~68364260AA (STELVIO - VERIFY VIA MULTIECUSCAN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2022-2023 for this generation
Compatible donor years: 2022, 2023
Donor must match part family 68274 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Donor must match part family 68RFE - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2022-2023 for this generation
Compatible donor years: 2022, 2023
Donor must match part family 68275 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2024-2025 for this generation
Compatible donor years: 2024, 2025
Donor must match part family 68440 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Donor must match part family 68RFE - requires cloning
Always match the full part number before buying a used module.
_years covers only 2024-2025 for this generation
Compatible donor years: 2024, 2025
Donor must match part family 68441 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family ~68364290AA (STELVIO - VERIFY VIA MULTIECUSCAN VIN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family ~68364290AA (STELVIO - VERIFY VIA MULTIECUSCAN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2026 for this generation
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family ~68364290AA (STELVIO - VERIFY VIA MULTIECUSCAN) - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family 68360872AA - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family 68360873AA - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family 68360872AB - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family 68360873AB - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2022 for this generation
Compatible donor years: 2020, 2021, 2022
Donor must match part family 50551317 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2022 for this generation
Compatible donor years: 2020, 2021, 2022
Donor must match part family 50559284 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2023-2026 for this generation
Compatible donor years: 2023, 2024, 2025, 2026
Donor must match part family 50548366 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2020-2026 for this generation
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2019-2021 for this generation
Compatible donor years: 2019, 2020, 2021
Always match the full part number before buying a used module.
_years covers only 2019-2026 for this generation
Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2022-2023 for this generation
Compatible donor years: 2022, 2023
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
6 gateway, immobilizer, and security items documented across 2018-2026.
Alfa Romeo IMMO3 - pin extraction via MultiEcuScan; AKL supported
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2019-2026 for this generation
Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2020-2023 for this generation
Compatible donor years: 2020, 2021, 2022, 2023
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
Alfa IMMO3 system. wiTECH required for key programming and module replacement. Pin code extractable via obd; akl supported.
Yes. Core Auto Logic supports generation-scoped module programming for the Alfa Romeo Stelvio (2018-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
The Alfa Romeo Stelvio (2018-2026) generation currently shows 33 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM) (2018), Airbag Control Module (ACM) (2019), and Airbag Control Module (ACM) (2020-2023). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: ~68364228AA (STELVIO - VERIFY VIA MULTIECUSCAN VIN) (2018) - confirm for your exact year/VIN.
The merged generation data documents 16 ADAS systems, including Forward Camera (Monocular) (2018), Forward Radar (77GHz) (2018), Blind Spot Monitoring (BSM) - Rear Radar (2018), Forward Collision Warning / LDW - Front Camera (2019), and Forward Radar (77GHz) (2019). Calibration triggers include Windshield Replacement (2018), Front Bumper Repair or Replacement (2018), Rear Bumper Repair or Replacement (2018), and Any Collision (2018). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Yes. The generation data includes 10 SRS records, including Airbag Control Module (ACM) (2018), Airbag Control Module (ACM) (2019), and Airbag Control Module (ACM) (2020-2023). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: ~68364228AA (STELVIO - VERIFY VIA MULTIECUSCAN VIN) (2018) - confirm for your exact year/VIN.
No assumption should be made across the full span. The generation page merges rows across 2018-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Yes, where the VIN and security workflow support it. The generation data includes 6 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.