VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2026 Toyota BZ4X Supported Services
2026 Toyota BZ4X
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform Toyota EA1T (BEV - bZ4X 2024)
- CAN Architecture CAN-FD backbone + LIN body sub-bus + Ethernet (multimedia/VCU gateway); 400V HV CAN
- Security Toyota Smart Key (312/314MHz) + Digital Key (NFC/BLE); Type 7 immobilizer; AKL via Techstream + dealer auth
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2026 Toyota Bz4x. On this vehicle we cover documented systems include TSS 3.0 Front Camera Module (FCM) - bZ4X 2024, TSS 3.0 Millimeter Wave Radar (Front) - 2024, and Blind Spot Monitor / RCTA Radar - L/R (2024), this Toyota EA1T (BEV - bZ4X 2024) platform vehicle, Toyota Smart Key / Transponder immobilizer support, Toyota Audio Multimedia infotainment programming. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
Toyota EA1T (BEV - bZ4X 2024)
Production
2023-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
CAN-FD backbone + LIN body sub-bus + Ethernet (multimedia/VCU gateway); 400V HV CAN
YEAR-SPECIFIC NOTES
Infotainment
Toyota Audio Multimedia
Exact-year service summary for 2026 Toyota Bz4x
ADAS coverage
This 2026 Toyota Bz4x page documents 4 ADAS systems, including TSS 3.0 Front Camera Module (FCM) - bZ4X 2024, TSS 3.0 Millimeter Wave Radar (Front) - 2024, Blind Spot Monitor / RCTA Radar - L/R (2024), and Panoramic View Monitor Camera System (if equipped) - 2024.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any 400V HV System Service. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 18 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2026 Toyota Bz4x.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2026 Toyota Bz4x using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Toyota Safety Sense 3.0 (TSS 3.0): Pre-Collision Automatic Emergency Braking, Ra - Standard; Immobilizer: Toyota Smart Key / Transponder - Standard; Platform: Toyota EA1T (BEV - Confirmed
Driver-assist suite
Toyota Safety Sense 3.0 (TSS 3.0): Pre-Collision Automatic Emergency Braking, Radar Cruise with curve speed reduction, Lane Departure Alert + Steering Assist, Automatic High Beams, Lane Tracing Assist, Road Sign Assist - standard all trims; Blind Spot Monitoring/Rear Cross-Traffic Alert standard
VIN and build split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Infotainment context
Toyota Audio Multimedia; Toyota bZ infotainment: 12.3" standard; wireless CarPlay/Android Auto; OTA updates; Solar roof option
Network and access
CAN: CAN-FD backbone + LIN body sub-bus + Ethernet (multimedia/VCU gateway); 400V HV CAN
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2026 Toyota BZ4X. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
5 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
2 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
10 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Toyota Safety Sense 3.0 (TSS 3.0): Pre-Collision Automatic Emergency Braking, Ra
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Immobilizer: Toyota Smart Key / Transponder
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: Toyota EA1T (BEV
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota Bz4x issues we resolve on this platform: TSS 3.0 Front Camera Module (FCM) - bZ4X 2024, TSS 3.0 Millimeter Wave Radar (Front) - 2024, Blind Spot Monitor / RCTA Radar - L/R (2024), and Panoramic View Monitor Camera System (if equipped) - 2024 recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Toyota EA1T (BEV - bZ4X 2024) platform uses CAN-FD backbone + LIN body sub-bus + Ethernet (multimedia/VCU gateway); 400V HV CAN. Key programming and immobilizer faults - Toyota Smart Key / Transponder immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Toyota Safety Sense 3.0 (TSS 3.0): Pre-Collision Automatic Emergency Braking, Radar Cruise with curve speed reduction, Lane Departure Alert + Steering Assist, Automatic High Beams, Lane Tracing Assist, Road Sign Assist - standard all trims; Blind Spot Monitoring/Rear Cross-Traffic Alert standard
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| TSS 3.0 Front Camera Module (FCM) - bZ4X 2024 | Stereo Camera | Camera | Static | YES | ~88212-42020 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| TSS 3.0 Millimeter Wave Radar (Front) - 2024 | Front Radar | Radar | Static | YES | ~88210-42020 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor / RCTA Radar - L/R (2024) | Rear Radar | Radar | Static + Dynamic | YES | ~88162-42010 L, ~88162-42020 R (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Panoramic View Monitor Camera System (if equipped) - 2024 | Surround Camera | Camera | Static | YES | ~86790-42010 (PVM ECU - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: TSS 3.0 FCM, Pre-Collision AEB, LDA, AHB, LTA, Road Sign Assist
TSS 3.0 FCM static calibration via Techstream. Toyota mat pattern. Level surface. 12V aux must be powered. Same as 2023.
Front Bumper Repair or Replacement Affected: TSS 3.0 Front Radar, Pre-Collision, Adaptive Cruise
Front radar static calibration via Techstream. Inspect EA1T bracket. Run with FCM.
Rear Bumper Repair or Replacement Affected: BSM Radar, RCTA, PVM Rear Camera
BSM radar initialization. PVM calibration if camera disturbed. Road verify at 15+ mph.
Any 400V HV System Service Affected: VCU, Battery ECU, Motor Inverter, OBC, DC-DC, Regen Braking, ABS Integration
400V HV safety MANDATORY. Insulation resistance check, HV service plug isolation, 5+ min wait, PPE required. Techstream HV adaptation after any 400V component. Verify regen braking, charging, VCU-ABS integration.
Collision (Any Severity) - 400V Vehicle Affected: SRS, TSS 3.0, BSM, HV Battery structural integrity, 400V wiring
Insulation resistance check before any post-collision diagnostic. HV battery structural integrity required before return to service. Full ADAS scan. EV-specific collision repair training required.
Hub Motor Verification (2024 Build Date Check) Affected: Hub motor attachment - AWD models
2024 production builds have resolved hub motor loosening from 2023 recall. If servicing a vehicle converted or transferred from 2023, verify recall completion status. Confirm wheel hub bolt torque to spec as part of any AWD underbody service.
Any Module Replacement Affected: VCU, Battery ECU, Motor Inverter, Body ECU, Smart Key ECU, ASA, ABS ECU
Techstream + Programming Port + dealer auth. No plug and play. HV safety mandatory before underhood/underbody work.
Forward Camera Replacement
Camera module replacement requires full recalibration using Techstream.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using Techstream.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
SRS MODULES
SRS Modules
SRS Control Unit 8917042B60
- PART
- 8917042B60
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
SRS Control Unit 8917042E70
- PART
- 8917042E70
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Techstream or J2534 for SRS reset. DTC B1650 common post-crash. Battery disconnect and 90-second wait before removal.
ECU MODULES
ECU Modules
Vehicle Control Unit (VCU) - 2024 ~89650-42010 (VERIFY VIA TPDS - 2024 BUILD)
- PART
- ~89650-42010 (VERIFY VIA TPDS - 2024 BUILD)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso/Toyota VCU (EA1T)
- NOTES
- 400V VCU. Techstream Programming Port. HV safety MANDATORY. VIN-coded. Techstream VCU adaptation post-replacement. Coordinate with Battery ECU if both replaced.
HV Battery ECU - 2024 ~89891-42010 (VERIFY VIA TPDS)
- PART
- ~89891-42010 (VERIFY VIA TPDS)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso Battery ECU (400V)
- NOTES
- 71.4kWh / 72.8kWh Li-ion 400V pack management. HV safety mandatory. Techstream initialization. Verify SOC, cell balance, thermal status post-replacement.
Motor Inverter ECU - Front/Rear (2024) ~89650-42020 FRONT, ~89650-42030 REAR AWD (VERIFY VIA TPDS)
- PART
- ~89650-42020 FRONT, ~89650-42030 REAR AWD (VERIFY VIA TPDS)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso Motor Inverter ECU
- NOTES
- 400V inverter. HV safety mandatory. Techstream motor calibration. Regen calibration required post-replacement.
DC-DC Converter ECU - 2024 ~89050-42010 (VERIFY VIA TPDS)
- PART
- ~89050-42010 (VERIFY VIA TPDS)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso DC-DC ECU
- NOTES
- Steps 400V to 12V. Techstream initialization. Verify 12V aux charging and all body electronics post-replacement.
On-Board Charger (OBC) ECU - 2024 ~89050-42020 (VERIFY VIA TPDS)
- PART
- ~89050-42020 (VERIFY VIA TPDS)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Denso OBC ECU (400V)
- NOTES
- AC charging ECU (11kW or 18.2kW depending on trim). HV safety mandatory. Techstream initialization. Verify L1/L2 charging function post-replacement.
BCM MODULES
BCM Modules
Body ECU - bZ4X 2024 ~89224-42010 (VERIFY VIA TPDS - 2024)
- PART
- ~89224-42010 (VERIFY VIA TPDS - 2024)
- SECURITY
- toyota_type7
- CODING
- Yes
- CLONE
- Yes
- NOTES
- Techstream programming + VIN coding. Not plug and play. Verify all body electrical functions and Digital Key integration post-programming.
Smart Key / Certification ECU - bZ4X 2024 ~89990-42010 (VERIFY VIA TPDS)
- PART
- ~89990-42010 (VERIFY VIA TPDS)
- SECURITY
- toyota_type7_digital_key
- CODING
- Yes
- CLONE
- No
- NOTES
- Techstream + dealer auth. Key re-registration required. Digital Key cloud deauthorization before replacement. Same as 2023 procedure.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
N/A - Single Speed / No TCU
- PROTOCOL
- Virgin Flash
- CODING
- No
- CLONE
- No
- CHIP/MCU
- N/A
- NOTES
- Pure electric vehicle with single-speed reduction gear, no traditional TCU/TCM present
N/A - Single Speed / No TCU
- PROTOCOL
- Virgin
- CODING
- No
- CLONE
- No
- CHIP/MCU
- N/A
- NOTES
- Pure electric vehicle with single-speed reduction gear, no traditional TCU/TCM present
ABS / BRAKE MODULES
ABS / Brake Modules
ABS / Brake ECU with Regen Coordination - 2024 ~44050-42010 (VERIFY VIA TPDS - BZ4X 2024)
- PART
- ~44050-42010 (VERIFY VIA TPDS - BZ4X 2024)
- CLONE
- Yes
- NOTES
- Techstream initialization. 4-wheel bleed. SAS zero-point via Techstream. HV system must be active during brake calibration routine for regen coordination. Verify regenerative braking feel and ABS function post-service. Same procedure as 2023.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-42U50
- PART
- 83800-42U50
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (spiral cable 84306 family)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Toyota bZ 12.3" Infotainment - 2024 ~86100-42010 (VERIFY VIA TPDS - 2024)
- PART
- ~86100-42010 (VERIFY VIA TPDS - 2024)
- NOTES
- Techstream initialization if replaced. OTA-capable. Wireless CarPlay/Android Auto. VIN registration required. Verify charging status display, energy flow, and ADAS overlays post-replacement.
Digital Key Module (NFC / BLE - if equipped) ~89990-42020 (VERIFY VIA TPDS)
- PART
- ~89990-42020 (VERIFY VIA TPDS)
- NOTES
- Techstream init + Cert ECU coordination. Cloud re-enrollment post-replacement.
Solar Roof Panel Module (if equipped - 315W)
- NOTES
- 315W solar. HV safety before roof work. Techstream solar system check if controller replaced. Verify solar input on infotainment.
DC Fast Charging Port (CCS - 150kW peak)
- NOTES
- 400V CCS port. HV safety mandatory before R&R. Techstream DCFC init post-replacement. Verify DCFC handshake and 150kW peak charging.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Toyota Smart Key / Transponder
- Add Key Yes
- All Keys Lost Yes
Toyota Smart Key (312/314MHz) + Digital Key (NFC/BLE); Type 7 immobilizer; AKL via Techstream + dealer auth
IMMOBILIZER MODULES
Immobilizer Modules
Immobilizer System (Type 7 - EA1T BEV 2024) CERTIFICATION ECU (~89990-42010)
- PART
- CERTIFICATION ECU (~89990-42010)
- SECURITY
- toyota_type7
- NOTES
- Toyota Type 7. Techstream + dealer auth. VCU replacement requires IMMO re-pairing. Digital Key cloud deauthorize before Smart Key ECU replacement. Same as 2023 procedure.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob ~89904-42010 (VERIFY VIA TPDS - BZ4X 2024)
- PART
- ~89904-42010 (VERIFY VIA TPDS - BZ4X 2024)
- NOTES
- Techstream + dealer auth. Min 2 keys for add-key. AKL requires dealer auth.
NFC Key Card
- NOTES
- Cloud enrollment via Toyota app. Deactivate before Smart Key ECU replacement. Re-enroll after.
Replacement Notes
Toyota Smart Key / Transponder system. Techstream required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Unibody - TNGA-derived EA1T BEV platform; high-strength steel + aluminum; 400V battery skateboard floor
- OBD Protocol
- ISO 15765-4 CAN / CAN-FD; 400V HV system requires insulation resistance check before OBD access post-collision
- CAN Architecture
- CAN-FD backbone + LIN body sub-bus + Ethernet (multimedia/VCU gateway); 400V HV CAN
- Infotainment
- Toyota bZ infotainment: 12.3" standard; wireless CarPlay/Android Auto; OTA updates; Solar roof option
- OTA Capable
- Yes
- Infotainment Name
- Toyota Audio Multimedia
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - EV not in openpilot tree
Not in openpilot support tree as of April 2026. Subaru Solterra twin; no openpilot port as of April 2026.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2026 Toyota Bz4x?
ADAS calibration pricing for a 2026 Toyota Bz4x depends on which of its 4 documented systems need work after a repair. This vehicle is documented with TSS 3.0 Front Camera Module (FCM) - bZ4X 2024, TSS 3.0 Millimeter Wave Radar (Front) - 2024, Blind Spot Monitor / RCTA Radar - L/R (2024), and Panoramic View Monitor Camera System (if equipped) - 2024. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2026 Toyota Bz4x?
Yes. The 2026 Toyota Bz4x uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 8917042B60. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2026 Toyota Bz4x?
After windshield replacement on a 2026 Toyota Bz4x, TSS 3.0 Front Camera Module (FCM) - bZ4X 2024 and Panoramic View Monitor Camera System (if equipped) - 2024 rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2026 Toyota Bz4x module service take?
Most 2026 Toyota Bz4x onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 16 programmable modules documented in our database (5 ECU, 2 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2026 Toyota Bz4x on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2026 Toyota Bz4x. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2026 Toyota Bz4x programming?
Every programming, cloning, and calibration job on the 2026 Toyota Bz4x is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2026 Toyota Bz4x with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2026 Toyota Bz4x. Immobilizer generation on this platform: Toyota Smart Key / Transponder. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2026 Toyota Bz4x can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2026 Toyota Bz4x. For this vehicle our database documents:
- 5 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 4 ADAS module
Infotainment on this platform: Toyota Audio Multimedia. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2026 Toyota BZ4X covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 8646C-080, 88210-78020, F6010
- ECU / PCM Part Numbers
- BZ4X EV - NO 89661 ECM
- BCM / Body Module Part Numbers
- ~89224-42010 (VERIFY VIA TPDS - 2024), ~89990-42010 (VERIFY VIA TPDS)
- SRS / Airbag Module Part Numbers
- 8917042B60, 8917042E70
- ABS / EBCM Part Numbers
- 44050-42010
- Instrument Cluster (IPC) Part Numbers
- 83800-42U50
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (SPIRAL CABLE 84306 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2026 Toyota bZ4X
These vehicles use one or more of the same replacement modules indexed for this vehicle.