Immobilizer: SKREEM (Chrysler rolling code, 315 MHz)
StandardKey programming requires manufacturer-level tool access.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2014-2026 Ram ProMaster Generation Guide
Ram ProMaster 1st Gen (2014-2026) ADAS Calibration & Module Programming
Covers model years 2014-2026 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Ram ProMaster built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform BYm (Fiat Ducato-based, ProMaster 1st Gen - SGW equipped 2019+)
- CAN Architecture CAN-C (500 kbps HS-CAN) + CAN-IHS; SGW (Secure Gateway) active 2019+ - wiTECH 2.0 bypass required
- Security SKREEM - Chrysler rolling code; no OBD PIN extraction; AKL via wiTECH 2.0 + DealerConnect
The ADAS, module, and security rows below are consolidated across the full 2014-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2014-2026”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 RAM Promaster. On this vehicle we cover documented systems include Rear View Camera, Forward Collision Warning / AEB, and Lane Departure Warning, this BYm (Fiat Ducato-based, ProMaster 1st Gen - SGW equipped 2019+) platform vehicle, SKREEM (Chrysler rolling code, 315 MHz) immobilizer support, OEM-gateway-subscription work handled on our side, Uconnect 4C infotainment programming. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
BYm (Fiat Ducato-based, ProMaster 1st Gen - SGW equipped 2019+)
Production
2014-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD
Engine
-
CAN Speed
CAN-C (500 kbps HS-CAN) + CAN-IHS; SGW (Secure Gateway) active 2019+ - wiTECH 2.0 bypass required
Feature availability 4
Platform: BYm (Fiat Ducato-based, ProMaster 1st Gen)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Rear backup camera STANDARD (2019+ federal mandate)
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: BYm (Fiat Ducato-based, ProMaster 1st Gen
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Stellantis wiTECH 2.0
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required Security gateway access required No practical workaround
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses CAN-C (500 kbps HS-CAN) + CAN-IHS; SGW (Secure Gateway) active 2019+ - wiTECH 2.0 bypass required with ISO 15765-4 CAN (500 kbps); SGW blocks generic scan tools. A security gateway requires registered tool access.
- CAN
- CAN-C (500 kbps HS-CAN) + CAN-IHS; SGW (Secure Gateway) active 2019+ - wiTECH 2.0 bypass required
- OBD
- ISO 15765-4 CAN (500 kbps); SGW blocks generic scan tools
- Gateway
- Stellantis Secure Gateway (SGW)
- Subscription
- Yes
can_architecture obd_protocol
Generation service summary for Ram ProMaster 1st Gen (2014-2026)
Generation coverage
This page consolidates Ram ProMaster service data for 2014-2026 across 13 model years; 13 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 13 system records, including Rear View Camera (2014-2019), Forward Collision Warning / AEB (2019), Lane Departure Warning (2019), and Rear View Camera (2020). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 11 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 70 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 11 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Ram ProMaster 2014-2026 span, with exact-year validation before service.
Get a quoteDo I need calibration?
Any Module Replacement 15
BCM
2014-2018required
PROXI alignment required via wiTECH 2.0 after replacement of BCM, PCM, TIPM, or ORC. DealerConnect authorization required for PCM flash. ORC is replace-only after airbag deployment - no crash data clear.
PCM
2014-2018required
PROXI alignment required via wiTECH 2.0 after replacement of BCM, PCM, TIPM, or ORC. DealerConnect authorization required for PCM flash. ORC is replace-only after airbag deployment - no crash data clear.
TCM
2014-2018required
PROXI alignment required via wiTECH 2.0 after replacement of BCM, PCM, TIPM, or ORC. DealerConnect authorization required for PCM flash. ORC is replace-only after airbag deployment - no crash data clear.
TIPM
2014-2018required
PROXI alignment required via wiTECH 2.0 after replacement of BCM, PCM, TIPM, or ORC. DealerConnect authorization required for PCM flash. ORC is replace-only after airbag deployment - no crash data clear.
ORC
2014-2018required
PROXI alignment required via wiTECH 2.0 after replacement of BCM, PCM, TIPM, or ORC. DealerConnect authorization required for PCM flash. ORC is replace-only after airbag deployment - no crash data clear.
BCM
2019required
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools - wiTECH 2.0 subscription required.
PCM
2019required
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools - wiTECH 2.0 subscription required.
SGW
2019required
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools - wiTECH 2.0 subscription required.
TIPM
2019required
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools - wiTECH 2.0 subscription required.
ORC
2019required
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools - wiTECH 2.0 subscription required.
BCM
2020-2026required
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools.
PCM
2020-2026required
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools.
SGW
2020-2026required
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools.
TIPM
2020-2026required
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools.
ORC
2020-2026required
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools.
Rear Collision 3
ORC
2014-2018required
Full module scan via wiTECH mandatory. ORC - if deployment DTC present, replace module. Verify rear camera function if equipped. No ADAS recalibration required on 2014.
rear camera (if equipped)
2014-2018required
Full module scan via wiTECH mandatory. ORC - if deployment DTC present, replace module. Verify rear camera function if equipped. No ADAS recalibration required on 2014.
rear sensors
2014-2018required
Full module scan via wiTECH mandatory. ORC - if deployment DTC present, replace module. Verify rear camera function if equipped. No ADAS recalibration required on 2014.
Windshield Replacement (FCW Equipped) 3
FCW Forward Camera
2019required
Static camera calibration required via wiTECH 2.0 if FCW option equipped. Level surface, target board. SGW active - wiTECH 2.0 mandatory.
FCW Forward Camera
2020-2021, 2023-2026required
Static calibration via wiTECH 2.0 if FCW equipped. SGW active - wiTECH 2.0 mandatory.
FCW Forward Camera
2022required
Static calibration via wiTECH 2.0 if FCW equipped. SGW active.
Forward Camera Replacement 2
2019
Yes
Camera module replacement requires full recalibration using wiTECH2.
2020-2026
Yes
Camera module replacement requires full recalibration using wiTECH2.
Any Front-End Collision 2
2019
Yes
Inspect and recalibrate forward camera after any front-end collision using wiTECH2.
2020-2026
Yes
Inspect and recalibrate forward camera after any front-end collision using wiTECH2.
Year-by-year details
| Year | VIN split | Infotainment | Wireless CarPlay | Wireless Android Auto | Trim notes |
|---|---|---|---|---|---|
| 2014 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |||
| 2015 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2016 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2017 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2018 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2019 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2020 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2021 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 4C | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2022 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 5 | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2023 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 5 | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2024 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 5 | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2025 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 5 | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2026 | VIN pos 4-8 identifies model/engine/restraint. Ram WMI: 1C6, 3C6 (Ram truck). Position 4-5 = model. Position 10 = model year code. | Uconnect 5 | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
What changes across 2014-2026
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
2022
- Infotainment: Uconnect 5 (was Uconnect 4C)
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
2023
- Infotainment: Uconnect 5 (was Uconnect 4C)
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
2024
- Infotainment: Uconnect 5 (was Uconnect 4C)
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
2025
- Infotainment: Uconnect 5 (was Uconnect 4C)
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
2026
- Infotainment: Uconnect 5 (was Uconnect 4C)
- Wireless CarPlay: Yes
- Wireless Android Auto: Yes
13 ADAS systems documented across 2014-2026. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Rear backup camera STANDARD (2019+ federal mandate); Forward Collision Warning optional; no Lane Keeping Assist; SGW active
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera 2014-2019 | Rear Camera | Camera | None | YES | - | |
| Forward Collision Warning / AEB 2019 | Camera | ADAS | Static | Conditional | - | |
| Lane Departure Warning 2019 | Camera | ADAS | Static | Conditional | - | |
| Rear View Camera 2020 | Rear Camera | Camera | Static | YES | - | |
| Forward Camera (Monocular) 2020 | Forward Camera | Camera | Static | YES | - | |
| Rear View Camera 2021 | Rear Camera | Camera | Static | YES | - | |
| Forward Camera (Monocular) 2021 | Forward Camera | Camera | Static | YES | - | |
| Rear View Camera 2022 | Rear Camera | Camera | Static | YES | - | |
| Forward Camera (Monocular) 2022 | Forward Camera | Camera | Static | YES | - | |
| Rear View Camera 2023 | Rear Camera | Camera | Static | YES | - | |
| Forward Collision Warning / Lane Departure Warning Camera (Safety Group) 2023 | Forward Camera | Camera | Static | YES | - | |
| Rear View Camera 2024-2026 | Rear Camera | Camera | Static | YES | - | |
| Forward Collision Warning / Lane Departure Warning Camera (Safety Group) 2024-2026 | Forward Camera | Camera | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Any Module Replacement 2014-2018 Affected: BCM, PCM, TCM, TIPM, ORC
PROXI alignment required via wiTECH 2.0 after replacement of BCM, PCM, TIPM, or ORC. DealerConnect authorization required for PCM flash. ORC is replace-only after airbag deployment - no crash data clear.
Rear Collision 2014-2018 Affected: ORC, rear camera (if equipped), rear sensors
Full module scan via wiTECH mandatory. ORC - if deployment DTC present, replace module. Verify rear camera function if equipped. No ADAS recalibration required on 2014.
Windshield Replacement (FCW Equipped) 2019 Affected: FCW Forward Camera
Static camera calibration required via wiTECH 2.0 if FCW option equipped. Level surface, target board. SGW active - wiTECH 2.0 mandatory.
Any Module Replacement 2019 Affected: BCM, PCM, SGW, TIPM, ORC
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools - wiTECH 2.0 subscription required.
Forward Camera Replacement 2019
Camera module replacement requires full recalibration using wiTECH2.
Any Front-End Collision 2019
Inspect and recalibrate forward camera after any front-end collision using wiTECH2.
Windshield Replacement (FCW Equipped) 2020-2021, 2023-2026 Affected: FCW Forward Camera
Static calibration via wiTECH 2.0 if FCW equipped. SGW active - wiTECH 2.0 mandatory.
Any Module Replacement 2020-2026 Affected: BCM, PCM, SGW, TIPM, ORC
PROXI alignment via wiTECH 2.0. ORC replace-only after deployment. SGW blocks generic tools.
Forward Camera Replacement 2020-2026
Camera module replacement requires full recalibration using wiTECH2.
Any Front-End Collision 2020-2026
Inspect and recalibrate forward camera after any front-end collision using wiTECH2.
Windshield Replacement (FCW Equipped) 2022 Affected: FCW Forward Camera
Static calibration via wiTECH 2.0 if FCW equipped. SGW active.
Modules we program on this generation
70 documented Ram ProMaster modules across 2014-2026. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
Occupant Restraint Controller (ORC) Verify by VIN 2014-2018 68271405AA
_years covers only 2014-2018 for this generation
Used/donor module guide
Compatible donor years: 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
- PART
- 68271405AA
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) Verify by VIN 2017 68303231AA
_years covers only 2017 for this generation
Used/donor module guide
Compatible donor years: 2017
Always match the full part number before buying a used module.
- PART
- 68303231AA
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) Verify by VIN 2017 68303232AA
_years covers only 2017 for this generation
Used/donor module guide
Compatible donor years: 2017
Always match the full part number before buying a used module.
- PART
- 68303232AA
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) Verify by VIN 2019-2026 68394935AA
_years covers only 2019-2026 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 68394935AA
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
Occupant Restraint Controller (ORC) Verify by VIN 2020-2021 68484345AA
_years covers only 2020-2021 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
- PART
- 68484345AA
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Witech or compatible J2534 tool. ProxyAlignment may be required after module replacement. ORC VIN programming required.
ECU MODULES
ECU Modules
PCM - 3.6L Pentastar V6 Verify by VIN 2014-2018 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2014-2018 for this generation
Used/donor module guide
Compatible donor years: 2014, 2015, 2016, 2017, 2018
Donor must match part family OEM ~68 (VERIFY VIA DEALERCONNECT) - requires cloning
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch ME17 / Continental
- NOTES
- wiTECH 2.0 + Programming Port + DealerConnect for PCM flash and VIN tie. PROXI alignment required. Battery SOC above 80% before programming. Confirm 1500/2500/3500 variant PCM suffix via DealerConnect.
TCM - 62TE 6-Speed Automatic Verify by VIN 2014-2018 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2014-2018 for this generation
Used/donor module guide
Compatible donor years: 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental / ZF
- NOTES
- wiTECH TCM programming + PROXI alignment + adaptive reset after replacement. Shift quality relearn drive cycle required post-programming.
PCM - 3.6L Pentastar V6 Verify by VIN 2019-2020 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Donor must match part family OEM ~68 (VERIFY VIA DEALERCONNECT) - requires cloning
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch ME17 / Continental
- NOTES
- wiTECH 2.0 + Programming Port + DealerConnect. SGW active - wiTECH 2.0 mandatory. PROXI alignment required. Battery SOC above 80% before programming.
PCM - 3.6L Pentastar V6 Verify by VIN 2021-2023 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2021-2023 for this generation
Used/donor module guide
Compatible donor years: 2021, 2022, 2023
Donor must match part family OEM ~68 (VERIFY VIA DEALERCONNECT) - requires cloning
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch ME17 / Continental
- NOTES
- wiTECH 2.0 + Programming Port + DealerConnect. SGW active. PROXI alignment required. Battery SOC above 80% before programming.
PCM - 3.6L Pentastar V6 Verify by VIN 2024-2026 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2024-2026 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Donor must match part family OEM ~68 (VERIFY VIA DEALERCONNECT) - requires cloning
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch ME17 / Continental
- NOTES
- wiTECH 2.0 + Programming Port + DealerConnect. SGW active. PROXI alignment required. Battery SOC above 80% before programming. ICE variant only - ProMaster EV uses separate architecture.
BCM MODULES
BCM Modules
Body Control Module (BCM) x5
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2014
_years covers only 2014 for this generation
Used/donor module guide
Compatible donor years: 2014
Donor must match part family OEM ~68 (VERIFY VIA DEALERCONNECT) - requires cloning
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- Rolling Code
- CODING
- Yes
- CLONE
- Yes
- NOTES
- wiTECH 2.0 + PROXI alignment required after BCM replacement. Controls lighting, locks, power accessories. VIN tie via wiTECH. No SGW - direct OBD access.
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2015-2018
_years covers only 2015-2018 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018
Donor must match part family OEM ~68 (VERIFY VIA DEALERCONNECT) - requires cloning
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- Rolling Code
- CODING
- Yes
- CLONE
- Yes
- NOTES
- wiTECH 2.0 + PROXI alignment required. VIN tie via wiTECH. No SGW.
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family OEM ~68 (VERIFY VIA DEALERCONNECT) - requires cloning
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- Rolling Code
- CODING
- Yes
- CLONE
- Yes
- NOTES
- wiTECH 2.0 + PROXI alignment required. SGW active - generic tools blocked. VIN tie via wiTECH.
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2020-2021
_years covers only 2020-2021 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021
Donor must match part family OEM ~68 (VERIFY VIA DEALERCONNECT) - requires cloning
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- Rolling Code
- CODING
- Yes
- CLONE
- Yes
- NOTES
- wiTECH 2.0 + PROXI alignment required. SGW active - generic tools blocked.
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2022-2026
_years covers only 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Donor must match part family OEM ~68 (VERIFY VIA DEALERCONNECT) - requires cloning
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- Rolling Code
- CODING
- Yes
- CLONE
- Yes
- NOTES
- wiTECH 2.0 + PROXI alignment required. SGW active.
TIPM (Totally Integrated Power Module) x4
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2014
_years covers only 2014 for this generation
Used/donor module guide
Compatible donor years: 2014
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- Rolling Code
- CODING
- Yes
- CLONE
- No
- NOTES
- wiTECH PROXI alignment required. Controls all fused/relay circuits. DealerConnect authorization required. Commercial van TIPM variant - confirm 1500/2500/3500 series before ordering.
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2015
_years covers only 2015 for this generation
Used/donor module guide
Compatible donor years: 2015
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- Rolling Code
- CODING
- Yes
- CLONE
- No
- NOTES
- wiTECH PROXI alignment required. DealerConnect authorization required. Confirm 1500/2500/3500 variant.
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2016-2021
_years covers only 2016-2021 for this generation
Used/donor module guide
Compatible donor years: 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- Rolling Code
- CODING
- Yes
- CLONE
- No
- NOTES
- wiTECH PROXI alignment required. DealerConnect authorization required.
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2022-2026
_years covers only 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- Rolling Code
- CODING
- Yes
- CLONE
- No
- NOTES
- wiTECH PROXI alignment required. DealerConnect authorization.
SGW (Secure Gateway Module) x3
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- uds
- CODING
- Yes
- CLONE
- No
- NOTES
- New 2019+. Routes all CAN traffic, blocks non-authenticated access. wiTECH 2.0 subscription required for bypass. Generic scan tool access denied. PROXI alignment after SGW replacement.
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- uds
- CODING
- Yes
- CLONE
- No
- NOTES
- SGW routes all CAN traffic. wiTECH 2.0 subscription required for bypass. PROXI alignment after SGW replacement.
OEM ~68 (VERIFY VIA DEALERCONNECT) Verify by VIN 2021-2026
_years covers only 2021-2026 for this generation
Used/donor module guide
Compatible donor years: 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- SECURITY
- uds
- CODING
- Yes
- CLONE
- No
- NOTES
- wiTECH 2.0 subscription required for bypass. PROXI alignment after SGW replacement.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 62TE 6-Speed Auto x4
68RFE Verify by VIN 2014-2015 J2534
_years covers only 2014-2015 for this generation
Used/donor module guide
Compatible donor years: 2014, 2015
Donor must match part family 68RFE - requires cloning
Always match the full part number before buying a used module.
- PART
- 68RFE
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC1797
- NOTES
- Requires Quick Learn procedure, ATF+4 fluid, TCU adaptation after install
P05150 Verify by VIN 2016-2017 J2534
_years covers only 2016-2017 for this generation
Used/donor module guide
Compatible donor years: 2016, 2017
Donor must match part family P05150 - requires cloning
Always match the full part number before buying a used module.
- PART
- P05150
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC1797
- NOTES
- Requires VIN coding and transmission adaptation. Use ATF+4 fluid. Chrysler DRB-III or wiTECH tool required for programming.
68RFE Verify by VIN 2018-2019 J2534
_years covers only 2018-2019 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019
Donor must match part family 68RFE - requires cloning
Always match the full part number before buying a used module.
- PART
- 68RFE
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental PCM/TCM Integrated
- NOTES
- Requires SCN coding via wiTECH. Transmission adaptation required after install. ATF+4 fluid spec. VIN programming mandatory.
68RFE Verify by VIN 2020-2021 J2534
_years covers only 2020-2021 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021
Donor must match part family 68RFE - requires cloning
Always match the full part number before buying a used module.
- PART
- 68RFE
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental MPC5674F
- NOTES
- Quick learn procedure required, StarSCAN tool recommended, ATF+4 specification, VIN and mileage programming mandatory
TCU - 948TE 9-Speed Auto x3
68406 Verify by VIN 2014-2015 J2534
_years covers only 2014-2015 for this generation
Used/donor module guide
Compatible donor years: 2014, 2015
Always match the full part number before buying a used module.
- PART
- 68406
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch TC1797
- NOTES
- ZF 9HP48 based, requires wiTECH tool, ATF+4 fluid, extensive adaptation procedure
68406 Verify by VIN 2018-2019 J2534
_years covers only 2018-2019 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
- PART
- 68406
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- ZF TC1797
- NOTES
- ZF 9HP48 based. Requires dealer programming with wiTECH. Security gateway authentication required. Mopar ATF+4 only.
68RFE948 Verify by VIN 2022-2023 J2534
_years covers only 2022-2023 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023
Donor must match part family 68RFE948 - requires cloning
Always match the full part number before buying a used module.
- PART
- 68RFE948
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC1797
- NOTES
- Requires dealer scan tool for TCM programming and adaptation. ATF spec: ATF+4. Shift adaptation relearn required after programming.
TCU - 9G-Tronic 9-Speed Auto Verify by VIN 2024-2025 x1
_years covers only 2024-2025 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025
Donor must match part family 68RFE - requires cloning
Always match the full part number before buying a used module.
- PART
- 68RFE
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental SAK-TC275TP-64F200N
- NOTES
- Requires SCN coding, ATF relearn via StarSCAN or equivalent, use ATF+4 specification fluid
N/A - Single Speed / No TCU 2026 x2
Part 1 Verify by VIN Virgin Flash
_years covers only 2026 for this generation
Used/donor module guide
Compatible donor years: 2026
Always match the full part number before buying a used module.
- PROTOCOL
- Virgin Flash
- CODING
- No
- CLONE
- No
- CHIP/MCU
- N/A
- NOTES
- Ram Promaster discontinued after 2022 model year - no 2026 variant exists
Part 2 Verify by VIN Virgin
_years covers only 2026 for this generation
Used/donor module guide
Compatible donor years: 2026
Always match the full part number before buying a used module.
- PROTOCOL
- Virgin
- CODING
- No
- CLONE
- No
- CHIP/MCU
- N/A
- NOTES
- Ram Promaster discontinued after 2022 model year - no 2026 variant exists
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/ESC Module Verify by VIN 2014 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2014 for this generation
Used/donor module guide
Compatible donor years: 2014
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- CLONE
- No
- NOTES
- wiTECH ABS initialization after replacement. Brake bleed required if hydraulic unit replaced - wiTECH automated bleed cycle. Steering angle sensor zero-point calibration via wiTECH after replacement.
ABS/ESC Module Verify by VIN 2015 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2015 for this generation
Used/donor module guide
Compatible donor years: 2015
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- CLONE
- No
- NOTES
- wiTECH ABS initialization after replacement. Brake bleed if hydraulic unit replaced. SAS zero-point calibration via wiTECH.
ABS/ESC Module Verify by VIN 2016-2018 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2016-2018 for this generation
Used/donor module guide
Compatible donor years: 2016, 2017, 2018
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- CLONE
- No
- NOTES
- wiTECH initialization after replacement. Brake bleed if hydraulic unit replaced. SAS zero-point calibration via wiTECH.
ABS/ESC Module Verify by VIN 2019 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- CLONE
- No
- NOTES
- wiTECH initialization after replacement. SGW active - wiTECH 2.0 required. Brake bleed if hydraulic unit replaced. SAS zero-point calibration via wiTECH.
ABS/ESC Module Verify by VIN 2020-2021 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2020-2021 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- CLONE
- No
- NOTES
- wiTECH initialization after replacement. SGW active. Brake bleed if hydraulic unit replaced. SAS zero-point calibration via wiTECH.
ABS/ESC Module Verify by VIN 2022-2026 OEM ~68 (VERIFY VIA DEALERCONNECT)
_years covers only 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- OEM ~68 (VERIFY VIA DEALERCONNECT)
- CLONE
- No
- NOTES
- wiTECH initialization. SGW active. Brake bleed if hydraulic unit replaced. SAS zero-point calibration via wiTECH.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) x18
68224871AC Verify by VIN 2014
_years covers only 2014 for this generation
Used/donor module guide
Compatible donor years: 2014
Donor must match part family 68224871AC - requires cloning
Always match the full part number before buying a used module.
- PART
- 68224871AC
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68253786AC Verify by VIN 2015
_years covers only 2015 for this generation
Used/donor module guide
Compatible donor years: 2015
Donor must match part family 68253786AC - requires cloning
Always match the full part number before buying a used module.
- PART
- 68253786AC
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68253787AC Verify by VIN 2015
_years covers only 2015 for this generation
Used/donor module guide
Compatible donor years: 2015
Donor must match part family 68253787AC - requires cloning
Always match the full part number before buying a used module.
- PART
- 68253787AC
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68253786AD Verify by VIN 2016
_years covers only 2016 for this generation
Used/donor module guide
Compatible donor years: 2016
Donor must match part family 68253786AD - requires cloning
Always match the full part number before buying a used module.
- PART
- 68253786AD
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68253787AD Verify by VIN 2016
_years covers only 2016 for this generation
Used/donor module guide
Compatible donor years: 2016
Donor must match part family 68253787AD - requires cloning
Always match the full part number before buying a used module.
- PART
- 68253787AD
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68345188AA Verify by VIN 2017
_years covers only 2017 for this generation
Used/donor module guide
Compatible donor years: 2017
Donor must match part family 68345188AA - requires cloning
Always match the full part number before buying a used module.
- PART
- 68345188AA
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68345189AA Verify by VIN 2017
_years covers only 2017 for this generation
Used/donor module guide
Compatible donor years: 2017
Donor must match part family 68345189AA - requires cloning
Always match the full part number before buying a used module.
- PART
- 68345189AA
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68345188AB Verify by VIN 2018
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Donor must match part family 68345188AB - requires cloning
Always match the full part number before buying a used module.
- PART
- 68345188AB
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68345189AB Verify by VIN 2018
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Donor must match part family 68345189AB - requires cloning
Always match the full part number before buying a used module.
- PART
- 68345189AB
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68345188AC Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family 68345188AC - requires cloning
Always match the full part number before buying a used module.
- PART
- 68345188AC
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68345189AC Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family 68345189AC - requires cloning
Always match the full part number before buying a used module.
- PART
- 68345189AC
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68247514AC Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family 68247514AC - requires cloning
Always match the full part number before buying a used module.
- PART
- 68247514AC
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68472800AB Verify by VIN 2020-2024
_years covers only 2020-2024 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021, 2022, 2023, 2024
Donor must match part family 68472800AB - requires cloning
Always match the full part number before buying a used module.
- PART
- 68472800AB
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68472804AB Verify by VIN 2020-2024
_years covers only 2020-2024 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021, 2022, 2023, 2024
Donor must match part family 68472804AB - requires cloning
Always match the full part number before buying a used module.
- PART
- 68472804AB
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68340906AC Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Donor must match part family 68340906AC - requires cloning
Always match the full part number before buying a used module.
- PART
- 68340906AC
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68517084AE Verify by VIN 2021-2024
_years covers only 2021-2024 for this generation
Used/donor module guide
Compatible donor years: 2021, 2022, 2023, 2024
Donor must match part family 68517084AE - requires cloning
Always match the full part number before buying a used module.
- PART
- 68517084AE
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68569392AA Verify by VIN 2023
_years covers only 2023 for this generation
Used/donor module guide
Compatible donor years: 2023
Donor must match part family 68569392AA - requires cloning
Always match the full part number before buying a used module.
- PART
- 68569392AA
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
68X AA Verify by VIN 2025-2026
_years covers only 2025-2026 for this generation
Used/donor module guide
Compatible donor years: 2025, 2026
Donor must match part family 68X AA - requires cloning
Always match the full part number before buying a used module.
- PART
- 68X AA
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) x3
68224874AA Verify by VIN 2014
_years covers only 2014 for this generation
Used/donor module guide
Compatible donor years: 2014
Always match the full part number before buying a used module.
- PART
- 68224874AA
- CODING
- Yes
- NOTES
- Static calibration after replacement using scan tool with steering-angle reset routine. Vehicle on level ground, wheels straight.
Part 2 Verify by VIN 2015-2019
_years covers only 2015-2019 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring SAS)
Part 3 Verify by VIN 2020-2026
_years covers only 2020-2026 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- Standalone SAS - Mopar 56046745AA (Fiat-sourced)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Other x11
Part 1 Verify by VIN 2014
_years covers only 2014 for this generation
Used/donor module guide
Compatible donor years: 2014
Always match the full part number before buying a used module.
- NOTES
- wiTECH programming + variant configuration after replacement. Confirm 5.0 vs 8.4 inch unit by trim. Commercial van - fleet upfit wiring may affect accessory module communication.
Part 2 Verify by VIN 2014
_years covers only 2014 for this generation
Used/donor module guide
Compatible donor years: 2014
Always match the full part number before buying a used module.
- NOTES
- No calibration required. wiTECH DTC clear after sensor replacement. Verify audible proximity alert function.
Part 3 Verify by VIN 2015
_years covers only 2015 for this generation
Used/donor module guide
Compatible donor years: 2015
Always match the full part number before buying a used module.
- NOTES
- wiTECH programming + variant config after replacement. Confirm screen size by trim.
Part 4 Verify by VIN 2016-2018
_years covers only 2016-2018 for this generation
Used/donor module guide
Compatible donor years: 2016, 2017, 2018
Always match the full part number before buying a used module.
- NOTES
- wiTECH programming + variant config after replacement.
Part 5 Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- NOTES
- wiTECH programming + variant config after replacement. SGW active - wiTECH 2.0 required. Confirm screen size by trim.
Part 6 Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- NOTES
- wiTECH programming + variant config. SGW active - wiTECH 2.0 required.
OEM (VERIFY VIA DEALERCONNECT - CONFIRM UCONNECT 4 VS 5 BY TRIM) Verify by VIN 2021
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- OEM (VERIFY VIA DEALERCONNECT - CONFIRM UCONNECT 4 VS 5 BY TRIM)
- NOTES
- wiTECH programming + variant config. SGW active - wiTECH 2.0 required. Uconnect 5 available on 2021 higher trims - confirm before ordering.
Part 8 Verify by VIN 2022
_years covers only 2022 for this generation
Used/donor module guide
Compatible donor years: 2022
Always match the full part number before buying a used module.
- NOTES
- wiTECH programming + variant config. SGW active - wiTECH 2.0 required. Confirm screen size by trim.
Part 9 Verify by VIN 2023-2026
_years covers only 2023-2026 for this generation
Used/donor module guide
Compatible donor years: 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- wiTECH programming + variant config. SGW active - wiTECH 2.0 required.
Part 10 Verify by VIN 2023
_years covers only 2023 for this generation
Used/donor module guide
Compatible donor years: 2023
Always match the full part number before buying a used module.
- NOTES
- No calibration required. wiTECH DTC clear after sensor replacement. Confirm front and/or rear sensor count by trim option.
Part 11 Verify by VIN 2024-2026
_years covers only 2024-2026 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- No calibration required. wiTECH DTC clear after sensor replacement.
11 gateway, immobilizer, and security items documented across 2014-2026.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System SKREEM (Chrysler rolling code, 315 MHz)
- Add Key Yes
- All Keys Lost Yes
SKREEM - Chrysler rolling code; no OBD PIN extraction; AKL via wiTECH 2.0 + DealerConnect
IMMOBILIZER MODULES
Immobilizer Modules
RFHUB / SKREEM Verify by VIN 2014
_years covers only 2014 for this generation
Used/donor module guide
Compatible donor years: 2014
Always match the full part number before buying a used module.
- SECURITY
- Rolling Code
- NOTES
- Chrysler SKREEM 315 MHz rolling code. No OBD PIN extraction. AKL requires wiTECH 2.0 + DealerConnect dealer authorization. PCM PROXI alignment mandatory after any immobilizer-related replacement.
RFHUB / SKREEM Verify by VIN 2015-2018
_years covers only 2015-2018 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
- SECURITY
- Rolling Code
- NOTES
- Chrysler SKREEM 315 MHz rolling code. No OBD PIN extraction. AKL via wiTECH 2.0 + DealerConnect.
RFHUB / SKREEM Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- SECURITY
- Rolling Code
- NOTES
- Chrysler SKREEM 315 MHz rolling code. No OBD PIN extraction. AKL via wiTECH 2.0 + DealerConnect. SGW active - wiTECH 2.0 mandatory for all key operations.
RFHUB / SKREEM Verify by VIN 2020
_years covers only 2020 for this generation
Used/donor module guide
Compatible donor years: 2020
Always match the full part number before buying a used module.
- SECURITY
- Rolling Code
- NOTES
- Chrysler SKREEM 315 MHz rolling code. No OBD PIN extraction. AKL via wiTECH 2.0 + DealerConnect. SGW active - wiTECH 2.0 mandatory.
RFHUB / SKREEM Verify by VIN 2021-2026
_years covers only 2021-2026 for this generation
Used/donor module guide
Compatible donor years: 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- SECURITY
- Rolling Code
- NOTES
- Chrysler SKREEM 315 MHz rolling code. No OBD PIN extraction. AKL via wiTECH 2.0 + DealerConnect. SGW active.
KEY & FOB TYPES
Key & Fob Types
Standard RKE Key Fob Verify by VIN 2014
_years covers only 2014 for this generation
Used/donor module guide
Compatible donor years: 2014
Always match the full part number before buying a used module.
- NOTES
- Chrysler SKREEM rolling code. All key learning via wiTECH 2.0 + DealerConnect only. AKL: DealerConnect authorization required, all keys erased and re-registered. No OBD PIN extraction.
Standard RKE Key Fob Verify by VIN 2015
_years covers only 2015 for this generation
Used/donor module guide
Compatible donor years: 2015
Always match the full part number before buying a used module.
- NOTES
- SKREEM rolling code. All key learning via wiTECH 2.0 + DealerConnect. AKL: DealerConnect authorization required.
Standard RKE Key Fob Verify by VIN 2016-2018
_years covers only 2016-2018 for this generation
Used/donor module guide
Compatible donor years: 2016, 2017, 2018
Always match the full part number before buying a used module.
- NOTES
- SKREEM rolling code. All key learning via wiTECH 2.0 + DealerConnect. AKL requires DealerConnect authorization.
Standard RKE Key Fob Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Always match the full part number before buying a used module.
- NOTES
- SKREEM rolling code. All key learning via wiTECH 2.0 + DealerConnect. SGW active - generic key programmers will not work. AKL requires DealerConnect authorization.
Standard RKE Key Fob Verify by VIN 2020-2021
_years covers only 2020-2021 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
- NOTES
- SKREEM rolling code. All key learning via wiTECH 2.0 + DealerConnect. SGW active - generic key programmers will not work. AKL requires DealerConnect authorization.
Standard RKE Key Fob Verify by VIN 2022-2026
_years covers only 2022-2026 for this generation
Used/donor module guide
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- SKREEM rolling code. All key learning via wiTECH 2.0 + DealerConnect. SGW active - generic key programmers blocked. AKL requires DealerConnect authorization.
Replacement Notes
SKREEM (Chrysler rolling code, 315 MHz) system. wiTECH required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Body-on-frame van - High-Strength Steel; cargo/passenger/window/chassis cab variants; 1500/2500/3500 series
- OBD Protocol
- ISO 15765-4 CAN (500 kbps); SGW blocks generic scan tools
- CAN Architecture
- CAN-C (500 kbps HS-CAN) + CAN-IHS; SGW (Secure Gateway) active 2019+ - wiTECH 2.0 bypass required
- Infotainment
- Uconnect 4 (7" or 8.4") - trim dependent; no OTA
- OTA Capable
- No
- Gateway Type
- Stellantis Secure Gateway (SGW)
- Gateway Subscription
- Yes
- Gateway Bypass Method
- OEM wiTECH/authorized SGW access
- Infotainment Name
- Uconnect 4C
- ECU Unlock Supported
- Yes
- Custom Programming
- Yes
WHAT WE RESOLVE
1st Gen (2014-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Rear View Camera (2014-2019), Forward Collision Warning / AEB (2019), Lane Departure Warning (2019), and Rear View Camera (2020). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve Occupant Restraint Controller (ORC) (2014-2018), Occupant Restraint Controller (ORC) (2017), and Occupant Restraint Controller (ORC) (2019-2026). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 11 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Ram ProMaster (2014-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Ram ProMaster (2014-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Ram ProMaster (2014-2026)?
The Ram ProMaster (2014-2026) generation currently shows 38 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Occupant Restraint Controller (ORC) (2014-2018), Occupant Restraint Controller (ORC) (2017), and Occupant Restraint Controller (ORC) (2019-2026). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 68271405AA (2014-2018) - confirm for your exact year/VIN.
Does Ram ProMaster (2014-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 13 ADAS systems, including Rear View Camera (2014-2019), Forward Collision Warning / AEB (2019), Lane Departure Warning (2019), Rear View Camera (2020), and Forward Camera (Monocular) (2020). Calibration triggers include Any Module Replacement (2014-2018), Rear Collision (2014-2018), Windshield Replacement (FCW Equipped) (2019), and Any Module Replacement (2019). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Ram ProMaster (2014-2026)?
Yes. The generation data includes 5 SRS records, including Occupant Restraint Controller (ORC) (2014-2018), Occupant Restraint Controller (ORC) (2017), and Occupant Restraint Controller (ORC) (2019-2026). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 68271405AA (2014-2018) - confirm for your exact year/VIN.
Do all Ram ProMaster (2014-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2014-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Ram ProMaster (2014-2026)?
Yes, where the VIN and security workflow support it. The generation data includes 11 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Ram ProMaster (2014-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Ram ProMaster (2014-2026) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
More ProMaster generations
1st Gen 2014-2026 You are here