VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2017 Nissan Armada Supported Services
2017 Nissan Armada
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform Y62 (2nd Gen US Armada, 2017+) - Body-on-Frame, Full-Size SUV, RWD/4WD
- CAN Architecture Nissan CAN (AV-CAN / MS-CAN / LIN bus); OBD2 DLC ISO 15765-4 CAN 500kbps; CONSULT-III Plus LAN for module flash
- Security Nissan NATS5 / NVIS IMMO5 - AES rolling code; no OBD pin extraction; AKL via CONSULT-III Plus + ASIST/DealerCONNECT; max 4 Intelligent Keys
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2017 Nissan Armada. On this vehicle we cover documented systems include Intelligent AVM (Around View Monitor) - 360-Degree Camera, Rear View Camera, and Forward Radar (PFCW - Predictive Forward Collision Warning), this Y62 (2nd Gen US Armada, 2017+) - Body-on-Frame, Full-Size SUV, RWD/4WD platform vehicle, Nissan NATS5 / NVIS IMMO5 (Y62 Armada 2017) immobilizer support, NissanConnect infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
Y62 (2nd Gen US Armada, 2017+) - Body-on-Frame, Full-Size SUV, RWD/4WD
Production
2017-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
Nissan CAN (AV-CAN / MS-CAN / LIN bus); OBD2 DLC ISO 15765-4 CAN 500kbps; CONSULT-III Plus LAN for module flash
YEAR-SPECIFIC NOTES
Infotainment
NissanConnect
Exact-year service summary for 2017 Nissan Armada
ADAS coverage
This 2017 Nissan Armada page documents 4 ADAS systems, including Intelligent AVM (Around View Monitor) - 360-Degree Camera, Rear View Camera, Forward Radar (PFCW - Predictive Forward Collision Warning), and Blind Spot Warning Radar (if equipped).
View ADAS dataCalibration triggers
Documented calibration triggers include AVM Camera or AVM ECU Replacement, Mirror Replacement, Front Bumper Repair or Replacement, and Wheel Alignment / Suspension Work. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 13 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2017 Nissan Armada.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2017 Nissan Armada using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
2017 Y62 Armada: Around View Monitor with Moving Object Detection (Intelligent A - Standard; Platform: Y62 (2nd Gen US Armada, 2017+) - Confirmed
Driver-assist suite
2017 Y62 Armada: Around View Monitor with Moving Object Detection (Intelligent Around View Monitor) standard Platinum, optional SL. Rear sonar standard. Blind Spot Detection optional. Backup camera standard. Predictive Forward Collision Warning via front radar. NO ProPilot Assist on 2017 Armada.
VIN and build split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Infotainment context
NissanConnect; 8" NissanConnect touchscreen (SL/Platinum); Apple CarPlay not yet standard on 2017 Armada; Rear entertainment available Platinum
Network and access
CAN: Nissan CAN (AV-CAN / MS-CAN / LIN bus); OBD2 DLC ISO 15765-4 CAN 500kbps; CONSULT-III Plus LAN for module flash
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2017 Nissan Armada. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
1 module documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
1 module documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
9 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
2017 Y62 Armada: Around View Monitor with Moving Object Detection (Intelligent A
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: Y62 (2nd Gen US Armada, 2017+)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Armada issues we resolve on this platform: Intelligent AVM (Around View Monitor) - 360-Degree Camera, Rear View Camera, Forward Radar (PFCW - Predictive Forward Collision Warning), and Blind Spot Warning Radar (if equipped) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Y62 (2nd Gen US Armada, 2017+) - Body-on-Frame, Full-Size SUV, RWD/4WD platform uses Nissan CAN (AV-CAN / MS-CAN / LIN bus); OBD2 DLC ISO 15765-4 CAN 500kbps; CONSULT-III Plus LAN for module flash.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
2017 Y62 Armada: Around View Monitor with Moving Object Detection (Intelligent Around View Monitor) standard Platinum, optional SL. Rear sonar standard. Blind Spot Detection optional. Backup camera standard. Predictive Forward Collision Warning via front radar. NO ProPilot Assist on 2017 Armada.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Intelligent AVM (Around View Monitor) - 360-Degree Camera | Surround Camera | Camera | Static | YES | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - | |
| Forward Radar (PFCW - Predictive Forward Collision Warning) | Front Radar | Radar | Static | YES | - | |
| Blind Spot Warning Radar (if equipped) | Side Radar | Radar | Static + Dynamic | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
AVM Camera or AVM ECU Replacement Affected: Intelligent AVM 360-Degree System, Moving Object Detection
Full 4-camera static calibration via CONSULT on level surface with mat required. All 4 positions must pass. Verify MOD warning function after calibration.
Mirror Replacement Affected: Intelligent AVM side cameras
Side AVM cameras are mirror-integrated. Mirror replacement requires full 4-camera AVM recalibration via CONSULT.
Front Bumper Repair or Replacement Affected: Forward Radar (PFCW)
CONSULT static radar alignment required after front bumper R&R. Reinstall bumper fully before calibration.
Wheel Alignment / Suspension Work Affected: ABS/VDC, Steering Angle Sensor
SAS zero-point calibration via CONSULT. Drive straight at 25+ mph after reset.
Any Module Replacement (BCM / ECM / I-Key ECU) Affected: NATS5 IMMO, BCM, ECM
CONSULT programming + ASIST dealer auth required. NATS5 seed/key sync between ECM and I-Key ECU mandatory.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using CONSULT-III+.
Any Front-End Collision
Inspect and recalibrate forward radar after any front-end collision using CONSULT-III+.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use CONSULT-III+.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using CONSULT-III+.
SRS Modules
SRS Control Unit K88206GW3A
- Part number
- K88206GW3A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU Modules
ECM - 5.6L VK56VD V8 Endurance ~23710-1LA (VERIFY SUFFIX VIA CONSULT
- Part number
- ~23710-1LA (VERIFY SUFFIX VIA CONSULT
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Hitachi/Renesas (VK56VD ECM, Y62)
- Notes
- CONSULT-III Plus ECM flash + VIN registration + NATS5 IMMO sync. Throttle valve closed-position learn + idle air volume learn via CONSULT after replacement. NATS lamp must extinguish before test drive.
TCM - RE7R01B 7-Speed AT ~31036-1LA (VERIFY VIA CONSULT
- Part number
- ~31036-1LA (VERIFY VIA CONSULT
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Jatco RE7R01B controller
- Notes
- CONSULT TCM programming + adaptive value reset after replacement. 300-mile adaptive relearn cycle. Fluid: Nissan Matic-S ATF.
Transfer Case Control Module (4WD models)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Nissan TCCM
- Notes
- 4WD-equipped Armadas: CONSULT TCCM initialization after replacement. Verify 4WD mode engagement (2H/4H/4L) via CONSULT live data. RWD-only Armadas: module not present.
BCM Modules
Body Control Module (BCM) ~284B1-1LA (VERIFY VIA CONSULT
- Part number
- ~284B1-1LA (VERIFY VIA CONSULT
- Security
- nats5
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- CONSULT-III Plus BCM coding + VIN registration after replacement. Controls lighting, windows, locks, Intelligent Key entry, power liftgate, rear climate integration, trailer module interface. NATS5 authentication through BCM. Not plug and play.
Intelligent Key ECU ~285E1-1LA (VERIFY VIA CONSULT
- Part number
- ~285E1-1LA (VERIFY VIA CONSULT
- Security
- nats5
- Coding required
- Yes
- Cloning supported
- No
- Notes
- CONSULT + ASIST dealer auth for key re-registration. All prior keys erased on replacement. Max 4 I-Keys. Verify all keys start vehicle after programming.
TCU / TCM Transmission Modules
TCU - RE7R01A 7-Speed Auto 31036-1LA0X
- Part number
- 31036-1LA0X
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH72531
- Notes
- CVT relearn via CONSULT III+. Use NS-3 CVT fluid. VIN and immobilizer coding required.
ABS / Brake Modules
ABS/VDC Control Module (Y62 Armada) ~47660-1LA (VERIFY VIA CONSULT
- Part number
- ~47660-1LA (VERIFY VIA CONSULT
- Cloning supported
- Yes
- Notes
- CONSULT VDC initialization after replacement. SAS zero-point calibration required after any alignment, suspension, or axle work: CONSULT SAS reset, drive straight at 25+ mph. 4WD models: verify front/rear ABS signal in CONSULT live data after repair. VDC warning lamp remains on until SAS calibration complete.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 24810-5ZN8A
- Part number
- 24810-5ZN8A
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Intelligent AVM System ASIST - Y62 AVM ECU)
- Part number
- ASIST - Y62 AVM ECU)
- Notes
- Standard Platinum / optional SL. Full 4-camera mat calibration via CONSULT after any camera/AVM ECU swap. Moving Object Detection verified post-calibration.
Rear Entertainment System (Platinum) ASIST - Y62 PLATINUM)
- Part number
- ASIST - Y62 PLATINUM)
- Notes
- Dual 8" screens with DVD/Blu-ray. CONSULT body system check after unit replacement. Verify audio routing and HDMI/wireless inputs.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Y62 Body-on-Frame - High-Strength Steel Ladder Frame; Full-size 3-row SUV
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Nissan CAN (AV-CAN / MS-CAN / LIN bus); OBD2 DLC ISO 15765-4 CAN 500kbps; CONSULT-III Plus LAN for module flash
- Infotainment
- 8" NissanConnect touchscreen (SL/Platinum); Apple CarPlay not yet standard on 2017 Armada; Rear entertainment available Platinum
- OTA Capable
- No
- Infotainment Name
- NissanConnect
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2017 Nissan Armada?
ADAS calibration pricing for a 2017 Nissan Armada depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Intelligent AVM (Around View Monitor) - 360-Degree Camera, Rear View Camera, Forward Radar (PFCW - Predictive Forward Collision Warning), and Blind Spot Warning Radar (if equipped). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2017 Nissan Armada?
Yes. The 2017 Nissan Armada uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: K88206GW3A. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2017 Nissan Armada?
After windshield replacement on a 2017 Nissan Armada, Intelligent AVM (Around View Monitor) - 360-Degree Camera, Rear View Camera, and Forward Radar (PFCW - Predictive Forward Collision Warning) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2017 Nissan Armada module service take?
Most 2017 Nissan Armada onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (3 ECU, 2 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2017 Nissan Armada on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2017 Nissan Armada. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2017 Nissan Armada programming?
Every programming, cloning, and calibration job on the 2017 Nissan Armada is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2017 Nissan Armada can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2017 Nissan Armada. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 4 ADAS module
Infotainment on this platform: NissanConnect. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2017 Nissan Armada covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 28438-5ZN8A
- ECU / PCM Part Numbers
- 23703-5ZN8B, 23703-5ZN8C
- BCM / Body Module Part Numbers
- ~284B1-1LA (VERIFY VIA CONSULT, ~285E1-1LA (VERIFY VIA CONSULT
- TCU / TCM Part Numbers
- 31036-1LA0X
- SRS / Airbag Module Part Numbers
- K88206GW3A
- ABS / EBCM Part Numbers
- 47660-5ZN8A
- Instrument Cluster (IPC) Part Numbers
- 24810-5ZN8A
- Transmission Control Module (TCM) Part Numbers
- 31036-1LA0X
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2017 Nissan Armada
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.