VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.
2009 Nissan Altima Supported Services
2009 Nissan Altima
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform L32 (5th Gen, 2007-2012)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Nissan NATS5 (ID46 Philips transponder); traditional key or Intelligent Key (FOBIK); PIN extraction via CONSULT-III+ possible; AKL requires CONSULT + PIN code + NATS ECM registration
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2009 Nissan Altima. On this vehicle we cover documented systems include Rear View Camera, this L32 (5th Gen, 2007-2012) platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
L32 (5th Gen, 2007-2012)
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES
Exact-year service summary for 2009 Nissan Altima
Electronic systems coverage
This 2009 Nissan Altima page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systemsProgrammable modules
This page indexes 15 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and SAS coverage.
View modulesGateway and security
This page includes 4 gateway, immobilizer, or key-security records for this 2009 Nissan Altima.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2009 Nissan Altima using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Basic: Rear view camera only (2011-2018) - Available; Platform: L32 (5th Gen, 2007-2012) - Confirmed
Driver-assist suite
Basic: Rear view camera only (2011-2018)
VIN and build split
VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
Infotainment context
Nissan AM/FM stereo; CD player; Bluetooth (select trims); Aux input
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2009 Nissan Altima. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
1 module documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
2 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
Feature availability 2
Basic: Rear view camera only (2011-2018)
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: L32 (5th Gen, 2007-2012)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Nissan Altima issues we resolve on this platform: Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - L32 (5th Gen, 2007-2012) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Basic: Rear view camera only (2011-2018)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | None | Conditional | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement
CONSULT ABS bleed + VDC sensor reset.
SRS Modules
SRS Control Unit 98510JA38A
- Part number
- 98510JA38A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit 98820JA50A
- Part number
- 98820JA50A
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU Modules
Engine Control Module (ECM) - 2.5L QR25DE I4 23710-JB00A
- Part number
- 23710-JB00A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- 2009 Altima 2.5L QR25DE I4; also listed for 2008.
Engine Control Module (ECM) - 2.5L QR25DE I4 (2009 variant) 23710-ZX10A
- Part number
- 23710-ZX10A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
Engine Control Module (ECM) - 3.5L VQ35DE V6 23710-JB10C
- Part number
- 23710-JB10C
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- 2007-2009 Altima SE/SR 3.5L VQ35DE; also listed for 2009 alongside ZN52A, ZN53A, ZX01A, JA14A variants.
Hybrid Control Module (HCM) - 2.5L QR25DE Hybrid 237A0-JA82A
- Part number
- 237A0-JA82A
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- 2007-2010 Altima Hybrid; see 2007 entry notes.
BCM Modules
BCM (Body Control Module)
- Notes
- Nissan BCM. CONSULT-III+ work support for key registration + module ID.
TCU / TCM Transmission Modules
TCU - CVT Xtronic 31036-JA0
- Part number
- 31036-JA0
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7055
- Notes
- CVT relearn required after programming, use CONSULT-III+ tool, Nissan NS-2 CVT fluid, stepper motor calibration needed
ABS / Brake Modules
ABS Actuator and Electric Unit (Control Unit)
- Notes
- Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each)
- Notes
- Active sensor. DTC C1101/C1102 series.
Other Modules (IPC, SAS)
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
RKE, Intelligent Key, sonar, camera, and convenience options - if equipped
- Notes
- Convenience equipment is package-dependent. Use Nissan service information for module replacement, option configuration, DTC checks, and subscription-dependent feature verification.
Gateway / Security Modules
Central Gateway Module
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- MPC5606BK
- Notes
- Compatibility label: X-TRAIL. BCM Notes: Read/Write
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- D Platform Unibody - Advanced High-Strength Steel (AHSS), FWD or AWD
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Nissan AM/FM stereo; CD player; Bluetooth (select trims); Aux input
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2009 Nissan Altima?
ADAS calibration pricing for a 2009 Nissan Altima depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2009 Nissan Altima?
Yes. The 2009 Nissan Altima uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 98510JA38A. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2009 Nissan Altima?
After windshield replacement on a 2009 Nissan Altima, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2009 Nissan Altima module service take?
Most 2009 Nissan Altima onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 15 programmable modules documented in our database (4 ECU, 1 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2009 Nissan Altima on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2009 Nissan Altima. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2009 Nissan Altima programming?
Every programming, cloning, and calibration job on the 2009 Nissan Altima is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2009 Nissan Altima can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2009 Nissan Altima. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 2 steering angle sensor (SAS)
- 1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2009 Nissan Altima covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 23710-JB00A, 23710-ZX10A, 23710-JB10C, 237A0-JA82A
- TCU / TCM Part Numbers
- 31036-JA0
- SRS / Airbag Module Part Numbers
- 98510JA38A, 98820JA50A
- Transmission Control Module (TCM) Part Numbers
- 31036-JA0
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2009 Nissan Altima
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
CONSULT III / IV Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.