Basic: Rear view camera only (2011-2018)
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2007-2012 Nissan Altima Generation Guide
Nissan Altima 4th Gen L32 (2007-2012) ADAS Calibration & Module Programming
Covers model years 2007-2012 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Nissan Altima built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform L32 (5th Gen, 2007-2012)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Nissan NATS5 (ID46 Philips transponder); traditional key or Intelligent Key (FOBIK); PIN extraction via CONSULT-III+ possible; AKL requires CONSULT + PIN code + NATS ECM registration
The ADAS, module, and security rows below are consolidated across the full 2007-2012 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2007-2012”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2007 Nissan Altima. On this vehicle we cover documented systems include No Factory ADAS Systems, this L32 (5th Gen, 2007-2012) platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
L32 (5th Gen, 2007-2012)
Production
2007-present
Trim Levels
-
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Feature availability 3
Immobilizer: NATS / I-Key
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: L32 (5th Gen, 2007-2012)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14 with ISO 9141-2 / KWP2000 (OBD-II, pre-CAN).
- CAN
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- OBD
- ISO 9141-2 / KWP2000 (OBD-II, pre-CAN)
obd_protocol
Generation service summary for Nissan Altima 4th Gen L32 (2007-2012)
Generation coverage
This page consolidates Nissan Altima service data for 2007-2012 across 6 model years; 6 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 3 system records, including No Factory ADAS Systems (2007), Rear View Camera (2008-2009, 2012), and Rear View Camera (2010-2011). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 2 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 41 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 4 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Nissan Altima 2007-2012 span, with exact-year validation before service.
Get a quoteDo I need calibration?
ECM Replacement 1
2007-2012
Yes
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement 1
2007-2012
Yes
CONSULT ABS bleed + VDC sensor reset.
Year-by-year details
| Year | VIN split | Trim notes |
|---|---|---|
| 2007 | ||
| 2008 | ||
| 2009 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2010 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2011 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2012 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
What changes across 2007-2012
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
2009
- VIN split: VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
2010
- VIN split: VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
2011
- VIN split: VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
2012
- VIN split: VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
3 ADAS systems documented across 2007-2012. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Basic: Rear view camera only (2011-2018)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| No Factory ADAS Systems 2007 | None | None | None | No | - | |
| Rear View Camera 2008-2009, 2012 | Rear Camera | Camera | None | Conditional | - | |
| Rear View Camera 2010-2011 | Rear Camera | Camera | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement
CONSULT ABS bleed + VDC sensor reset.
Modules we program on this generation
41 documented Nissan Altima modules across 2007-2012. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
Airbag Control Module (ACM) Verify by VIN 2007 x1
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Donor must match part family 284B1ET00A - requires cloning
Always match the full part number before buying a used module.
- PART
- 284B1ET00A
- PROTOCOL
- Bench
- CLONE
- true
- NOTES
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module Verify by VIN 2007 x1
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 284B1ET00B
- PROTOCOL
- None
- CLONE
- false
- NOTES
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged. Confirm correct resistance before reconnecting.
Passenger Airbag Module Verify by VIN 2007 x1
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 284B1JG01A
- PROTOCOL
- None
- CLONE
- false
- NOTES
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access. Confirm OEM part number matches vehicle build date.
ACM / SRS Module 2007 x3
284B1ET00A Verify by VIN Under center console, floor tunnel
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 284B1ET00A
- LOCATION
- Under center console, floor tunnel
- CHIP/MCU
- 93C76
- NOTES
- OEM part 284B1ET00A. Also fits: 284B1ET00B. Memory chip: 93C76. Crash data clear supported.
284B1ET00B Verify by VIN Under center console, floor tunnel
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 284B1ET00B
- LOCATION
- Under center console, floor tunnel
- CHIP/MCU
- 93C76
- NOTES
- OEM part 284B1ET00B. Memory chip: 93C76. Crash data clear supported.
284B1JG01A Verify by VIN Under center console, floor tunnel
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 284B1JG01A
- LOCATION
- Under center console, floor tunnel
- CHIP/MCU
- 93C76
- NOTES
- OEM part 284B1JG01A. Memory chip: 93C76. Crash data clear supported.
SRS Control Unit x4
98510-JA38A Verify by VIN 2008 Under center console
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 98510-JA38A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
98820-JA50A Verify by VIN 2008 Under center console
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 98820-JA50A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
98510JA38A Verify by VIN 2009-2012 Under center console
_years covers only 2009-2012 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- PART
- 98510JA38A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
98820JA50A Verify by VIN 2009-2012 Under center console
_years covers only 2009-2012 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- PART
- 98820JA50A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU MODULES
ECU Modules
Engine Control Module (ECM) - 2.5L QR25DE I4 x3
23710-JA04A Verify by VIN 2007 J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 23710-JA04A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2007 Nissan Altima 2.5L QR25DE I4; also fits 2008. Multiple suffix variants exist per transmission and market (JA00A, JA01A, JA05A, JA06A, JA90A, JA91A). | Sources: https://www.nissanpartsdeal.com/oem-2007-nissan-altima-engine_control_module.html
23710-JB00A Verify by VIN 2008 J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 23710-JB00A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2008 Altima 2.5L QR25DE I4; primary variant listed at nissanpartsdeal.com 2008 page. Multiple ZN-prefix variants (ZN50A, ZN65A, ZN66A, ZN67A, ZN68A) also documented for this year/engine. | Sources: https://www.nissanpartsdeal.com/oem-2008-nissan-altima-engine_control_module.html
23710-JB00A Verify by VIN 2009 J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
- PART
- 23710-JB00A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2009 Altima 2.5L QR25DE I4; also listed for 2008. Multiple ZN/ZX-prefix variants documented (ZN50A, ZN65A, ZN67A, ZX10A, ZX11A, ZX12A, ZX13A). JB13A, JB15B, JB17A also confirmed 2009-specific. | Sources: https://www.nissanpartsdeal.com/oem-2009-nissan-altima-engine_control_module.html
Engine Control Module (ECM) - 2.5L QR25DE I4 (alt variant) x2
23710-JA01A Verify by VIN 2007 J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 23710-JA01A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- Alternative QR25DE variant for 2007 Altima; listed alongside JA04A on nissanpartsdeal.com 2007 Altima ECM page. | Sources: https://www.nissanpartsdeal.com/oem-2007-nissan-altima-engine_control_module.html
23710-JB17A Verify by VIN 2008 J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 23710-JB17A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2008 Altima 2.5L QR25DE I4; confirmed on fs1inc.com listing for 2008 only. | Sources: https://www.fs1inc.com/23710-jb17a-2008-nissan-altima-2-5l-pcm-engine-computer-ecm-ecu-programmed-plug-play.html
Engine Control Module (ECM) - 3.5L VQ35DE V6 x3
23710-JB10C Verify by VIN 2007 J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 23710-JB10C
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- Fits 2007-2009 Nissan Altima SE/SR with 3.5L VQ35DE V6; confirmed as cross-year part at nissanpartsdeal.com. Also referenced as 2008 listing on parts.nissanusa.com. | Sources: https://www.nissanpartsdeal.com/parts/nissan-engine-control~23710-jb10c.html
23710-JB10C Verify by VIN 2008 J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 23710-JB10C
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2007-2009 Altima SE/SR 3.5L VQ35DE V6; confirmed on parts.nissanusa.com and nissanpartsdeal.com. Additional 2008 3.5L variants: 23710-JA10A, 23710-JA14A, 23710-ZN54A, 23710-JB11C. | Sources: https://parts.nissanusa.com/parts/nissan-ecm-23710jb10c
23710-JB10C Verify by VIN 2009 J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
- PART
- 23710-JB10C
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2007-2009 Altima SE/SR 3.5L VQ35DE; also listed for 2009 alongside ZN52A, ZN53A, ZX01A, JA14A variants. | Sources: https://www.nissanpartsdeal.com/oem-2009-nissan-altima-engine_control_module.html
Engine Control Module (ECM) - 3.5L VQ35DE V6 (alt variant) Verify by VIN 2007 x1
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 23710-JA11A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2007 Altima 3.5L VQ35DE; listed on fs1inc.com with hardware tag A56-A07 EN7. Additional 2007 variant JA12A also documented at same source. | Sources: https://www.fs1inc.com/23710-ja11a-2007-nissan-altima-3-5l-pcm-engine-computer-ecm-ecu-programmed-plug-play.html | Confidence: medium
Hybrid Control Module (HCM) - 2.5L QR25DE Hybrid x3
237A0-JA82A Verify by VIN 2007 J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 237A0-JA82A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- Hybrid vehicle control / engine control unit for 2007-2010 Altima Hybrid (QR25DE 2.5L). Note prefix 237A0 not 23710 - this is the hybrid-specific module distinct from standard ECM. | Sources: https://www.nissanpartsdeal.com/parts/nissan-hybrid-control~237a0-ja82a.html
237A0-JA82A Verify by VIN 2008 J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 237A0-JA82A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2007-2010 Altima Hybrid; 237A0 prefix (hybrid control module). See 2007 notes. | Sources: https://www.nissanpartsdeal.com/parts/nissan-hybrid-control~237a0-ja82a.html
237A0-JA82A Verify by VIN 2009 J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
- PART
- 237A0-JA82A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2007-2010 Altima Hybrid; see 2007 entry notes. | Sources: https://www.nissanpartsdeal.com/parts/nissan-hybrid-control~237a0-ja82a.html
Engine Control Module (ECM) - 2.5L QR25DE Hybrid x2
23710-JA81A Verify by VIN 2007 J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 23710-JA81A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2007-2008 Altima Hybrid ECM (standard 23710 prefix); confirmed at parts.nissanusa.com and oempartsonline.com. Replaces 23710-JA81B, JA81D, JA81E. | Sources: https://nissan.oempartsonline.com/oem-parts/nissan-ecm-23710ja81a
23710-JA80A Verify by VIN 2008 J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 23710-JA80A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- Fits 2007-2008 Altima Hybrid; confirmed at parts.nissanusa.com and Conicelli Nissan dealer parts. | Sources: https://nissan.oempartsonline.com/oem-parts/nissan-ecm-23710ja80a
Engine Control Module (ECM) - 2.5L QR25DE I4 (2009 variant) Verify by VIN 2009 x1
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
- PART
- 23710-ZX10A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2009-specific QR25DE I4 variant listed on nissanpartsdeal.com 2009 Altima ECM page alongside ZX11A, ZX12A, ZX13A. | Sources: https://www.nissanpartsdeal.com/oem-2009-nissan-altima-engine_control_module.html | Confidence: medium
ECM - 2.5L QR25DE I4 / 3.5L VQ35DE V6 Verify by VIN 2010-2012 x1
_years covers only 2010-2012 for this generation
Used/donor module guide
Compatible donor years: 2010, 2011, 2012
Always match the full part number before buying a used module.
- NOTES
- Nissan Altima ECM. CONSULT-III+ NATS registration + VIN write.
BCM MODULES
BCM Modules
BCM (Body Control Module) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- NOTES
- Nissan BCM. CONSULT-III+ work support for key registration + module ID.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - CVT Xtronic Verify by VIN 2007-2008 31036-JA0
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Donor must match part family 31036-JA0 - requires cloning
Always match the full part number before buying a used module.
- PART
- 31036-JA0
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7058
- NOTES
- CVT relearn required via CONSULT-III, use NS-2 CVT fluid, stepper motor calibration needed
TCU - CVT Xtronic Verify by VIN 2009-2010 31036-JA0
_years covers only 2009-2010 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010
Donor must match part family 31036-JA0 - requires cloning
Always match the full part number before buying a used module.
- PART
- 31036-JA0
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7055
- NOTES
- CVT relearn required after programming, use CONSULT-III+ tool, Nissan NS-2 CVT fluid, stepper motor calibration needed
TCU - CVT Continuously Variable Transmission Verify by VIN 2011-2012 31036-3TX0X
_years covers only 2011-2012 for this generation
Used/donor module guide
Compatible donor years: 2011, 2012
Donor must match part family 31036-3TX0X - requires cloning
Always match the full part number before buying a used module.
- PART
- 31036-3TX0X
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7058
- NOTES
- CVT fluid NS-3 required, TCU relearn via CONSULT III, VIN coding mandatory
ABS / BRAKE MODULES
ABS / Brake Modules
ABS Actuator and Electric Unit (Control Unit) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- NOTES
- Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- NOTES
- Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- NOTES
- Active sensor.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) Verify by VIN 2010 24810-ZX00A
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Donor must match part family 24810-ZX00A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-ZX00A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2011 24810-ZX10A
_years covers only 2011 for this generation
Used/donor module guide
Compatible donor years: 2011
Donor must match part family 24810-ZX10A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-ZX10A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2012 24810-ZX20A
_years covers only 2012 for this generation
Used/donor module guide
Compatible donor years: 2012
Donor must match part family 24810-ZX20A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-ZX20A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
RKE, Intelligent Key, sonar, camera, and convenience options - if equipped Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- NOTES
- Convenience equipment is package-dependent. Use Nissan service information for module replacement, option configuration, DTC checks, and subscription-dependent feature verification.
4 gateway, immobilizer, and security items documented across 2007-2012.
GATEWAY / SECURITY MODULES
Gateway / Security Modules
Central Gateway Module Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- MFG
- NXP / Freescale
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- MPC5606BK
- NOTES
- Compatibility label: X-TRAIL. BCM | Notes: Read/Write
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System NATS / I-Key
- Add Key Yes
- All Keys Lost Yes
Nissan NATS5 (ID46 Philips transponder); traditional key or Intelligent Key (FOBIK); PIN extraction via CONSULT-III+ possible; AKL requires CONSULT + PIN code + NATS ECM registration
IMMOBILIZER MODULES
Immobilizer Modules
NATS (Nissan Anti-Theft System) - IPDM/BCM Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- NOTES
- Nissan NATS5/NATS6. CONSULT-III+ IMMO registration. AKL: CONSULT PIN extraction possible pre-2015.
KEY & FOB TYPES
Key & Fob Types
Nissan Transponder Key (ID46 / NATS chip) Bench clone required
notes indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- NOTES
- ID46 Philips. CONSULT-III+ registration or aftermarket (Autel). Max 4 keys (NATS5).
Nissan Intelligent Key (Proximity) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- NOTES
- Push-to-start. CONSULT registration. Max 4 keys.
Replacement Notes
NATS / I-Key system. CONSULT-III Plus required for key programming and module replacement. Security pin required; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- D Platform Unibody - Advanced High-Strength Steel (AHSS), FWD or AWD
- OBD Protocol
- ISO 9141-2 / KWP2000 (OBD-II, pre-CAN)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Nissan AM/FM stereo; CD player; Bluetooth (select trims); Aux input
- OTA Capable
- No
- ECU Unlock Supported
- No
- Custom Programming
- Yes
WHAT WE RESOLVE
4th Gen L32 (2007-2012) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include No Factory ADAS Systems (2007), Rear View Camera (2008-2009, 2012), and Rear View Camera (2010-2011). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve Airbag Control Module (ACM) (2007), Driver Airbag Module (2007), and Passenger Airbag Module (2007). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 4 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Nissan Altima (2007-2012) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Nissan Altima (2007-2012). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Nissan Altima (2007-2012)?
The Nissan Altima (2007-2012) generation currently shows 33 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM) (2007), Driver Airbag Module (2007), and Passenger Airbag Module (2007). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 284B1ET00A (2007) - confirm for your exact year/VIN.
Does Nissan Altima (2007-2012) need ADAS calibration after glass or collision work?
The merged generation data documents 3 ADAS systems, including No Factory ADAS Systems (2007), Rear View Camera (2008-2009, 2012), and Rear View Camera (2010-2011). Calibration triggers include ECM Replacement and ABS/VDC Module Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Nissan Altima (2007-2012)?
Yes. The generation data includes 10 SRS records, including Airbag Control Module (ACM) (2007), Driver Airbag Module (2007), and Passenger Airbag Module (2007). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 284B1ET00A (2007) - confirm for your exact year/VIN.
Do all Nissan Altima (2007-2012) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2007-2012; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Nissan Altima (2007-2012)?
Yes, where the VIN and security workflow support it. The generation data includes 4 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Nissan Altima (2007-2012)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Nissan Altima (2007-2012) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.