Electronic systems coverage
This 2008 Mitsubishi Outlander page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systems 3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2008 Mitsubishi Outlander Supported Services
2008 Mitsubishi Outlander
ADAS calibration, module programming, and security relearns
Full ADAS calibration, module programming, and key security work for the 2008 Mitsubishi Outlander. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Technical snapshot
- Platform CW5W (2nd Gen, 2007-2013)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Mitsubishi ID46 transponder (Philips Crypto 2) or Texas Instruments 80-bit; MIT8/MIT11 key blank; MUT-III PIN extraction; AKL requires MUT-III + security PIN + IMMO ECU key registration
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2008 Mitsubishi Outlander. On this vehicle we cover documented systems include Blind Spot Monitoring, Forward Collision Warning, and Adaptive Cruise Control Sensor, this CW5W (2nd Gen, 2007-2013) platform vehicle, ETACS Immobilizer immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
CW5W (2nd Gen, 2007-2013)
Production
2007-present
Trim Levels
-
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Exact-year service summary for 2008 Mitsubishi Outlander
Programmable modules
This page indexes 14 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and SAS coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2008 Mitsubishi Outlander.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2008 Mitsubishi Outlander using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Mi-Pilot Assist: Forward Collision Mitigation, Lane Departure Warning/Lane Keepi - Available; Platform: CW5W (2nd Gen, 2007-2013) - Confirmed
Driver-assist suite
Mi-Pilot Assist: Forward Collision Mitigation, Lane Departure Warning/Lane Keeping Assist, Blind Spot Warning, Rear Cross-Traffic Alert, Rear Automatic Braking, Adaptive Cruise
Infotainment context
Mitsubishi AM/FM stereo; CD player; Bluetooth (select trims)
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Mitsubishi MUT-III SE
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2008 Mitsubishi Outlander. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
1 module documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
3 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
Feature availability 2
Mi-Pilot Assist: Forward Collision Mitigation, Lane Departure Warning/Lane Keepi
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: CW5W (2nd Gen, 2007-2013)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Mitsubishi Outlander issues we resolve on this platform: Blind Spot Monitoring, Forward Collision Warning, and Adaptive Cruise Control Sensor recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - CW5W (2nd Gen, 2007-2013) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Mi-Pilot Assist: Forward Collision Mitigation, Lane Departure Warning/Lane Keeping Assist, Blind Spot Warning, Rear Cross-Traffic Alert, Rear Automatic Braking, Adaptive Cruise
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Blind Spot Monitoring | Radar | ADAS | None | Conditional | - | |
| Forward Collision Warning | Camera | ADAS | Static | Conditional | - | |
| Adaptive Cruise Control Sensor | Radar | ADAS | Static | Conditional | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
MUT-III IMMO registration + ISC (idle speed) learn.
ABS Module Replacement
MUT-III bleed procedure + ASC sensor reset.
SRS Modules
Airbag Control Module (ACM)
- Protocol / method
- OBD
- Cloning supported
- Yes
- Notes
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged.
Passenger Airbag Module
- Protocol / method
- None
- Cloning supported
- No
- Notes
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access.
ECU Modules
Engine Control Module (ECM) - 2.4L 4B12 MIVEC I4 (Mitsubishi Denso) 1860A434
- Part number
- 1860A434
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Minor calibration differences may exist but hardware PN carries over. See 2007 entry for full notes.
BCM Modules
ETACS (Electronic Time and Alarm Control System)
- Notes
- Mitsubishi ETACS. MUT-III programming after replacement.
TCU / TCM Transmission Modules
TCU - CVT F1CJA Continuously Variable 8631A0
- Part number
- 8631A0
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Mitsubishi M32C/87
- Notes
- VIN coding mandatory, CVT fluid CVTF-J1 required, idle learning procedure needed after programming
TCU - 6A13 6-Speed Auto INVECS-III 8631A1
- Part number
- 8631A1
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Mitsubishi M32C/87
- Notes
- INVECS-III system, DiaFine SP-III ATF specification, adaptation values reset required after installation
ABS / Brake Modules
ABS/ASC-ECU
- Notes
- Mitsubishi ABS/ASC. MUT-III bleed procedure + sensor relearn.
Other Modules (IPC, SAS)
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Head Unit - Mitsubishi Connect Display Audio 8750A910
- Part number
- 8750A910
- Notes
- MUT-III coding required on ZM platform. 9-inch or 12.3-inch depending on trim. Wireless Apple CarPlay/Android Auto available.
Multi Around Monitor (360 Camera) 8750A915
- Part number
- 8750A915
- Notes
- MUT-III coding and camera calibration required on ZM. Higher resolution cameras vs GF/GG.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody - new ZM architecture
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Mitsubishi AM/FM stereo; CD player; Bluetooth (select trims)
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2008 - 2.0L 16v DI-D 4WD (BSY), 2.0L DI-D, 2.2L 16v DI-D, 2.2L 16v DI-D (4N14).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2008 Mitsubishi Outlander?
ADAS calibration pricing for a 2008 Mitsubishi Outlander depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Blind Spot Monitoring, Forward Collision Warning, and Adaptive Cruise Control Sensor. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2008 Mitsubishi Outlander?
Yes. The 2008 Mitsubishi Outlander uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2008 Mitsubishi Outlander?
After windshield replacement on a 2008 Mitsubishi Outlander, Forward Collision Warning rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2008 Mitsubishi Outlander module service take?
Most 2008 Mitsubishi Outlander onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 12 programmable modules documented in our database (1 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2008 Mitsubishi Outlander on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2008 Mitsubishi Outlander. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2008 Mitsubishi Outlander programming?
Every programming, cloning, and calibration job on the 2008 Mitsubishi Outlander is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2008 Mitsubishi Outlander can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2008 Mitsubishi Outlander. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 2 steering angle sensor (SAS)
- 3 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2008 Mitsubishi Outlander covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 1860A434
- TCU / TCM Part Numbers
- 8631A0, 8631A1
- Transmission Control Module (TCM) Part Numbers
- 8631A0, 8631A1
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2008 Mitsubishi Outlander
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Factory programming software Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.