Mi-Pilot Assist: Forward Collision Mitigation, Lane Departure Warning/Lane Keepi
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2007-2013 Mitsubishi Outlander Generation Guide
Mitsubishi Outlander 2nd Gen CW (2007-2013) ADAS Calibration & Module Programming
Covers model years 2007-2013 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Mitsubishi Outlander built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform CW5W (2nd Gen, 2007-2013)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Mitsubishi ID46 transponder (Philips Crypto 2) or Texas Instruments 80-bit; MIT8/MIT11 key blank; MUT-III PIN extraction; AKL requires MUT-III + security PIN + IMMO ECU key registration
The ADAS, module, and security rows below are consolidated across the full 2007-2013 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2007-2013”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2008 Mitsubishi Outlander. On this vehicle we cover documented systems include Blind Spot Monitoring, Forward Collision Warning, and Adaptive Cruise Control Sensor, this CW5W (2nd Gen, 2007-2013) platform vehicle, ETACS Immobilizer immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
CW5W (2nd Gen, 2007-2013)
Production
2007-present
Trim Levels
-
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Feature availability 3
Immobilizer: ETACS Immobilizer
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: CW5W (2nd Gen, 2007-2013)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Mitsubishi MUT-III SE
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
obd_protocol
Generation service summary for Mitsubishi Outlander 2nd Gen CW (2007-2013)
Generation coverage
This page consolidates Mitsubishi Outlander service data for 2007-2013 across 7 model years; 7 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 6 system records, including No Factory ADAS Systems (2007), Blind Spot Monitoring (2008-2013), Forward Collision Warning (2008-2013), and Adaptive Cruise Control Sensor (2008-2013). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 2 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 30 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 3 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Mitsubishi Outlander 2007-2013 span, with exact-year validation before service.
Get a quoteDo I need calibration?
ECM Replacement 1
2007-2013
Yes
MUT-III IMMO registration + ISC (idle speed) learn.
ABS Module Replacement 1
2007-2013
Yes
MUT-III bleed procedure + ASC sensor reset.
Year-by-year details
| Year | VIN split | Trim notes |
|---|---|---|
| 2007 | ||
| 2008 | ||
| 2009 | VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2010 | VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2011 | VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2012 | VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2013 | VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
What changes across 2007-2013
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
2009
- VIN split: VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code.
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
2010
- VIN split: VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code.
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
2011
- VIN split: VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code.
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
2012
- VIN split: VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code.
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
2013
- VIN split: VIN pos 4-8 identifies model/body/engine. Mitsubishi WMI: JA3, JA4, 4A3. Position 4-5 = model. Position 10 = model year code.
- Trims: Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration...
6 ADAS systems documented across 2007-2013. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Mi-Pilot Assist: Forward Collision Mitigation, Lane Departure Warning/Lane Keeping Assist, Blind Spot Warning, Rear Cross-Traffic Alert, Rear Automatic Braking, Adaptive Cruise
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| No Factory ADAS Systems 2007 | None | None | None | No | - | |
| Blind Spot Monitoring 2008-2013 | Radar | ADAS | None | Conditional | - | |
| Forward Collision Warning 2008-2013 | Camera | ADAS | Static | Conditional | - | |
| Adaptive Cruise Control Sensor 2008-2013 | Radar | ADAS | Static | Conditional | - | |
| Rear View Camera 2009, 2012-2013 | Rear Camera | Camera | None | Conditional | - | |
| Rear View Camera 2010-2011 | Rear Camera | Camera | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
MUT-III IMMO registration + ISC (idle speed) learn.
ABS Module Replacement
MUT-III bleed procedure + ASC sensor reset.
Modules we program on this generation
30 documented Mitsubishi Outlander modules across 2007-2013. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
Airbag Control Module (ACM) Verify by VIN 2007
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PROTOCOL
- Bench
- CLONE
- true
- NOTES
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module Verify by VIN 2007-2008
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
- PROTOCOL
- None
- CLONE
- false
- NOTES
- Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged. Confirm correct resistance before reconnecting.
Passenger Airbag Module Verify by VIN 2007-2008
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
- PROTOCOL
- None
- CLONE
- false
- NOTES
- Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access. Confirm OEM part number matches vehicle build date.
Airbag Control Module (ACM) Verify by VIN 2008
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- CLONE
- true
- NOTES
- After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
SRS Electronic Control Unit (SRS-ECU) Verify by VIN 2009-2013 7030B006XA
_years covers only 2009-2013 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- PART
- 7030B006XA
- LOCATION
- Under center console
- MFG
- Mitsubishi Electric
- NOTES
- Requires MUT-III or compatible scan tool for SRS-ECU reset. Battery disconnect and 60-second wait before removal. DTC B1400 common post-crash.
ECU MODULES
ECU Modules
Engine Control Module (ECM) - 2.4L 4B12 MIVEC I4 (Mitsubishi Denso) Verify by VIN 2007 1860A434
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 1860A434
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2007 Outlander 2.4L 4B12 US-market ECM. Mitsubishi Denso ECM PN 1860A434 appears in eBay OEM listings for 2007-2008 Outlander 2.4L AT/CVT applications. Mitsubishi PN format 1860A-XXXXX is standard for 2000s-era Mitsubishi ECUs. allcomputerresources.com lists this PN for 2007 Outlander 2.4L. Suffix may vary by transmission type (CVT vs step-AT). Rockauto does not list Mitsubishi OEM ECM directly; aftermarket remanufacturers confirm this family. | Sources: https://www.ebay.com/sch/i.html?_nkw=2007+mitsubishi+outlander+2.4+ecm+pcm+1860A | Confidence: medium
Engine Control Module (ECM) - 3.0L 6B31 MIVEC V6 (Mitsubishi Denso) Verify by VIN 2007 1860A453
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
- PART
- 1860A453
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2007 Outlander 3.0L 6B31 V6 US-market ECM. Mitsubishi Denso PN 1860A453 cited by allcomputerresources.com for 2007 Outlander 3.0L. The 6B31 is the MIVEC V6 exclusive to US-market higher trims (XLS, SE). eBay OEM listings confirm the 1860A-45X family for 2007 Outlander V6. Suffix variants may exist for different AWD/2WD configurations. | Sources: https://www.allcomputerresources.com/mitsubishi-outlander-ecm-2007-3-0l/ | Confidence: medium
Engine Control Module (ECM) - 2.4L 4B12 MIVEC I4 (Mitsubishi Denso) Verify by VIN 2008 1860A434
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 1860A434
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- Same PN family as 2007 for the 4B12 2.4L. allcomputerresources.com lists 1860A434 for 2007-2008 Outlander 2.4L with no mid-cycle ECM PN change noted. Minor calibration differences may exist but hardware PN carries over. See 2007 entry for full notes. | Sources: https://www.allcomputerresources.com/mitsubishi-outlander-ecm-2008-2.4l/ | Confidence: medium
ECM - 2.4L 4B12 I4 / 3.0L 6B31 V6 / 2.0L 4B11 I4 (pre-2007) Verify by VIN 2009-2013
_years covers only 2009-2013 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Mitsubishi Outlander ECM. MUT-III IMMO registration required.
BCM MODULES
BCM Modules
ETACS (Electronic Time and Alarm Control System) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Mitsubishi ETACS. MUT-III programming after replacement.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - CVT F1CJA Continuously Variable x2
8631A0 Verify by VIN 2007-2008 J2534
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
- PART
- 8631A0
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Mitsubishi M32C/87
- NOTES
- VIN coding mandatory, CVT fluid CVTF-J1 required, idle learning procedure needed after programming
8631A454 Verify by VIN 2013 J2534
_years covers only 2013 for this generation
Used/donor module guide
Compatible donor years: 2013
Donor must match part family 8631A454 - requires cloning
Always match the full part number before buying a used module.
- PART
- 8631A454
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7058
- NOTES
- CVT relearn required after programming. Use MUT-III or equivalent J2534 tool. CVT-J1 fluid specification. Throttle position sensor calibration needed.
TCU - 6A13 6-Speed Auto INVECS-III Verify by VIN 2007-2008 x1
_years covers only 2007-2008 for this generation
Used/donor module guide
Compatible donor years: 2007, 2008
Always match the full part number before buying a used module.
- PART
- 8631A1
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Mitsubishi M32C/87
- NOTES
- INVECS-III system, DiaFine SP-III ATF specification, adaptation values reset required after installation
TCU - CVT7 Continuously Variable Verify by VIN 2009-2010 x1
_years covers only 2009-2010 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
- PART
- 8631A087
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7058
- NOTES
- CVT relearn required after installation. Use MUT-III or compatible J2534 tool. CVT fluid specification: DiaQueen CVTF-J4. Transmission variant learning and clutch pressure adaptation mandatory.
TCU - W6A1A 6-Speed Auto Verify by VIN 2009-2010 x1
_years covers only 2009-2010 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010
Always match the full part number before buying a used module.
- PART
- 8631A269
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7058
- NOTES
- Shift pattern adaptation required. Use MUT-III for programming and initialization. ATF specification: DiaQueen ATF SP-IV. Torque converter lockup relearn procedure mandatory after TCU replacement.
TCU - CVT8 Continuously Variable Transmission Verify by VIN 2011-2012 x1
_years covers only 2011-2012 for this generation
Used/donor module guide
Compatible donor years: 2011, 2012
Always match the full part number before buying a used module.
- PART
- 8631A0
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7058
- NOTES
- CVT relearn required after programming. Use MUT-III or compatible J2534 tool. CVT fluid NS-3 specification. Throttle position sensor adaptation needed.
TCU - F4A42 4-Speed Automatic Verify by VIN 2011-2012 x1
_years covers only 2011-2012 for this generation
Used/donor module guide
Compatible donor years: 2011, 2012
Donor must match part family 8604A0 - requires cloning
Always match the full part number before buying a used module.
- PART
- 8604A0
- PROTOCOL
- Bench
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Mitsubishi M32C/87
- NOTES
- Basic 4-speed auto for base models. Shift adaptation relearn via drive cycle. Diamond ATF WS or equivalent. VIN coding essential.
TCU - 6B31 6-Speed Manual 2013 x2
Part 1 Verify by VIN Virgin Flash
_years covers only 2013 for this generation
Used/donor module guide
Compatible donor years: 2013
Always match the full part number before buying a used module.
- PROTOCOL
- Virgin Flash
- CODING
- No
- CLONE
- No
- CHIP/MCU
- N/A
- NOTES
- Manual transmission - no TCU present. Uses ECM for clutch pedal position sensing only.
Part 2 Verify by VIN Virgin
_years covers only 2013 for this generation
Used/donor module guide
Compatible donor years: 2013
Always match the full part number before buying a used module.
- PROTOCOL
- Virgin
- CODING
- No
- CLONE
- No
- CHIP/MCU
- N/A
- NOTES
- Manual transmission - no TCU present. Uses ECM for clutch pedal position sensing only.
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/ASC-ECU Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Mitsubishi ABS/ASC. MUT-III bleed procedure + sensor relearn.
Wheel Speed Sensor - Front (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Active sensor.
Wheel Speed Sensor - Rear (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Active sensor.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) Verify by VIN 2010 8100B064
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Donor must match part family 8100B064 - requires cloning
Always match the full part number before buying a used module.
- PART
- 8100B064
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2011 8100B065
_years covers only 2011 for this generation
Used/donor module guide
Compatible donor years: 2011
Donor must match part family 8100B065 - requires cloning
Always match the full part number before buying a used module.
- PART
- 8100B065
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2012 8100B066
_years covers only 2012 for this generation
Used/donor module guide
Compatible donor years: 2012
Donor must match part family 8100B066 - requires cloning
Always match the full part number before buying a used module.
- PART
- 8100B066
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2013 8100B067
_years covers only 2013 for this generation
Used/donor module guide
Compatible donor years: 2013
Donor must match part family 8100B067 - requires cloning
Always match the full part number before buying a used module.
- PART
- 8100B067
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Head Unit - Mitsubishi Connect Display Audio Verify by VIN 8750A910
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- PART
- 8750A910
- NOTES
- MUT-III coding required on ZM platform. 9-inch or 12.3-inch depending on trim. Wireless Apple CarPlay/Android Auto available.
Multi Around Monitor (360 Camera) Verify by VIN 8750A915
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- PART
- 8750A915
- NOTES
- MUT-III coding and camera calibration required on ZM. Higher resolution cameras vs GF/GG.
3 gateway, immobilizer, and security items documented across 2007-2013.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System ETACS Immobilizer
- Add Key Yes
- All Keys Lost Yes
Mitsubishi ID46 transponder (Philips Crypto 2) or Texas Instruments 80-bit; MIT8/MIT11 key blank; MUT-III PIN extraction; AKL requires MUT-III + security PIN + IMMO ECU key registration
IMMOBILIZER MODULES
Immobilizer Modules
Immobilizer-ECU (IMMU) Dealer security required
service_notes indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Mitsubishi IMMU. MUT-III key registration. AKL requires dealer PIN.
KEY & FOB TYPES
Key & Fob Types
Mitsubishi Transponder Key (ID46) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- ID46. MUT-III or aftermarket (Autel) registration.
Smart Key Fob (FMKR2) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Proximity key. MUT-III registration.
Replacement Notes
ETACS Immobilizer system. MUT-III required for key programming and module replacement. Security pin required; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody - new ZM architecture
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Mitsubishi AM/FM stereo; CD player; Bluetooth (select trims)
- OTA Capable
- No
- ECU Unlock Supported
- No
- Custom Programming
- Yes
WHAT WE RESOLVE
2nd Gen CW (2007-2013) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include No Factory ADAS Systems (2007), Blind Spot Monitoring (2008-2013), Forward Collision Warning (2008-2013), and Adaptive Cruise Control Sensor (2008-2013). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 3 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Mitsubishi Outlander (2007-2013) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Mitsubishi Outlander (2007-2013). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Mitsubishi Outlander (2007-2013)?
The Mitsubishi Outlander (2007-2013) generation currently shows 22 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 7030B006XA (2009-2013) - confirm for your exact year/VIN.
Does Mitsubishi Outlander (2007-2013) need ADAS calibration after glass or collision work?
The merged generation data documents 6 ADAS systems, including No Factory ADAS Systems (2007), Blind Spot Monitoring (2008-2013), Forward Collision Warning (2008-2013), Adaptive Cruise Control Sensor (2008-2013), and Rear View Camera (2009, 2012-2013). Calibration triggers include ECM Replacement and ABS Module Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Mitsubishi Outlander (2007-2013)?
Yes. The generation data includes 5 SRS records, including Airbag Control Module (ACM) (2007), Driver Airbag Module (2007-2008), and Passenger Airbag Module (2007-2008). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 7030B006XA (2009-2013) - confirm for your exact year/VIN.
Do all Mitsubishi Outlander (2007-2013) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2007-2013; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Mitsubishi Outlander (2007-2013)?
Yes, where the VIN and security workflow support it. The generation data includes 3 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Mitsubishi Outlander (2007-2013)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Mitsubishi Outlander (2007-2013) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.