Infiniti Safety Shield 360: Automatic Emergency Braking, Rear Automatic Braking
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2025-2026 Infiniti QX80 Generation Guide
Infiniti QX80 3rd Gen Y63 (2025-2026) ADAS Calibration & Module Programming
Covers model years 2025-2026 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Infiniti QX80 built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform Nissan F-Alpha Platform (body-on-frame; shared with Nissan Armada/Patrol)
- CAN Architecture HS-CAN (500 kbps); Nissan/Infiniti CAN; OBD2 DLC Pin 6/14
- Security Infiniti Intelligent Key (PEPS); rolling code transponder; CONSULT-programmed
The ADAS, module, and security rows below are consolidated across the full 2025-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2025-2026”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 Infiniti Qx80. On this vehicle we cover documented systems include Forward Camera (Mobileye EyeQ4), Forward Radar (Continental ARS 77GHz), and Blind Spot Monitor - Left (BSM), this Nissan F-Alpha Platform (body-on-frame; shared with Nissan Armada/Patrol) platform vehicle, Infiniti Intelligent Key PEPS; ECM/BCM immobilizer; rolling code transponder (CONSULT-III Plus programmed) immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
Nissan F-Alpha Platform (body-on-frame; shared with Nissan Armada/Patrol)
Production
2020-present
Trim Levels
Trim and package availability varies by market for the 2025 Infiniti QX80. Confirm specific ADAS fitment before calibration.
Drivetrain
RWD / 4WD
Engine
-
CAN Speed
HS-CAN (500 kbps); Nissan/Infiniti CAN; OBD2 DLC Pin 6/14
Feature availability 3
Immobilizer: Infiniti Intelligent Key PEPS
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: Nissan F-Alpha Platform (body-on-frame
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses HS-CAN (500 kbps); Nissan/Infiniti CAN; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps); Nissan/Infiniti CAN; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - infiniti not in openpilot support tree
Not in openpilot support tree as of April 2026. Infiniti not explicitly listed in Nissan values.py; no Infiniti ports.
Generation service summary for Infiniti QX80 3rd Gen Y63 (2025-2026)
Generation coverage
This page consolidates Infiniti QX80 service data for 2025-2026 across 2 model years; 2 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 14 system records, including Forward Camera (Mobileye EyeQ4) (2025), Forward Radar (Continental ARS 77GHz) (2025), Blind Spot Monitor - Left (BSM) (2025), and Blind Spot Monitor - Right (BSM) (2025). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 5 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 18 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 2 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Infiniti QX80 2025-2026 span, with exact-year validation before service.
Get a quoteDo I need calibration?
ECM Replacement 1
2025-2026
Yes
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement 1
2025-2026
Yes
CONSULT ABS bleed + VDC sensor reset.
Windshield Replacement 1
2025-2026
Yes
Safety Shield 360 forward collision warning camera (windshield-mounted) requires recalibration via CONSULT-III+.
Front Bumper/Radar Service 1
2025-2026
Yes
Front radar module recalibration required after front bumper removal or radar replacement.
Rear Bumper/Radar Service 1
2025-2026
Yes
Rear cross-traffic radar recalibration after rear bumper work.
Year-by-year details
What changes across 2025-2026
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
2026
- Trims: Trim and package availability varies by market for the 2026 Infiniti QX80. Confirm specific ADAS fitment before calibration.
14 ADAS systems documented across 2025-2026. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Infiniti Safety Shield 360: Automatic Emergency Braking, Rear Automatic Braking, Blind Spot Warning, Lane Departure Prevention, Rear Cross Traffic Alert, High Beam Assist
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Mobileye EyeQ4) 2025 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS 77GHz) 2025 | Front Radar | Radar | Static | YES | - | |
| Blind Spot Monitor - Left (BSM) 2025 | Side Radar | Radar | None | YES | - | |
| Blind Spot Monitor - Right (BSM) 2025 | Side Radar | Radar | None | YES | - | |
| Around View Monitor (AVM) - 360° Camera 2025 | Surround Camera | Camera | Static | YES | - | |
| Rear View Camera (RVC) 2025 | Rear Camera | Camera | None | YES | - | |
| Park Distance Control (PDC) - Ultrasonic 2025 | Parking Sensor | Ultrasonic | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2026 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS 77GHz) 2026 | Front Radar | Radar | Static | YES | - | |
| Blind Spot Monitor - Left (BSM) 2026 | Side Radar | Radar | None | YES | - | |
| Blind Spot Monitor - Right (BSM) 2026 | Side Radar | Radar | None | YES | - | |
| Around View Monitor (AVM) - 360° Camera 2026 | Surround Camera | Camera | Static | YES | - | |
| Rear View Camera (RVC) 2026 | Rear Camera | Camera | None | YES | - | |
| Park Distance Control (PDC) - Ultrasonic 2026 | Parking Sensor | Ultrasonic | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement
CONSULT ABS bleed + VDC sensor reset.
Windshield Replacement
Safety Shield 360 forward collision warning camera (windshield-mounted) requires recalibration via CONSULT-III+.
Front Bumper/Radar Service
Front radar module recalibration required after front bumper removal or radar replacement.
Rear Bumper/Radar Service
Rear cross-traffic radar recalibration after rear bumper work.
Modules we program on this generation
18 documented Infiniti QX80 modules across 2025-2026. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
SRS Control Unit Verify by VIN 2025 K8820-7JA1C
_years covers only 2025 for this generation
Used/donor module guide
Compatible donor years: 2025
Always match the full part number before buying a used module.
- PART
- K8820-7JA1C
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2026 K88207JA1C
_years covers only 2026 for this generation
Used/donor module guide
Compatible donor years: 2026
Always match the full part number before buying a used module.
- PART
- K88207JA1C
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU MODULES
ECU Modules
Engine Control Module (ECM) Dealer security required
security_type indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- NATS 7 / AES-128
- CODING
- Yes
- CLONE
- No
- NOTES
- ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Online server authentication required. Cloning not supported on 2018+ VIN-locked units.
Transmission Control Module (TCM) OBD coding supported
programming_method indicates OBD programming or coding
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- NATS 7 / AES-128
- CODING
- Yes
- CLONE
- No
- NOTES
- TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning not supported.
Body Control Module (BCM) OBD coding supported
programming_method indicates OBD programming or coding
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- NATS 7 / AES-128
- CODING
- Yes
- CLONE
- No
- NOTES
- BCM requires coding to vehicle VIN after replacement. Security gateway access required on 2018+ models. All comfort/convenience modules must be re-synced via our diagnostic software.
BCM MODULES
BCM Modules
BCM (Body Control Module) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Infiniti BCM. CONSULT-III+ required for VIN registration, option code programming, NATS sync, and IPDM-E/R coordination.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - RE0F10D CVT Verify by VIN 2025 31036-1XF0X
_years covers only 2025 for this generation
Used/donor module guide
Compatible donor years: 2025
Always match the full part number before buying a used module.
- PART
- 31036-1XF0X
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH72543
- NOTES
- Requires CONSULT III+ for programming. CVT relearn procedure mandatory. Use Nissan CVT Fluid NS-3 only. VIN coding required.
TCU - 9G-TRONIC 9-Speed Auto Verify by VIN 31705
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 31705
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH72543
- NOTES
- Requires CONSULT III Plus or equivalent. TCM adaptation required after installation. Use Nissan CVT-3 fluid specification. Relearn procedure mandatory.
ABS / BRAKE MODULES
ABS / Brake Modules
ABS Actuator and Electric Unit (Control Unit) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Nissan/Infiniti ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support. Verify VDC function post-replacement.
Wheel Speed Sensor - Front (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Active sensor.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) Verify by VIN 2025 24810-6JA0A
_years covers only 2025 for this generation
Used/donor module guide
Compatible donor years: 2025
Donor must match part family 24810-6JA0A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-6JA0A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2026 24810-6GW0A
_years covers only 2026 for this generation
Used/donor module guide
Compatible donor years: 2026
Donor must match part family 24810-6GW0A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-6GW0A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2026 24810-6GW1A
_years covers only 2026 for this generation
Used/donor module guide
Compatible donor years: 2026
Donor must match part family 24810-6GW1A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-6GW1A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (spiral cable 25554 family)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
12.3" Infiniti InTouch infotainment system Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Programming required after replacement. Verify software version compatibility before install.
Remote Start Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Factory remote start. BCM configuration required after replacement on equipped vehicles.
Tow Package / Trailer Brake Controller Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Integrated trailer brake controller on equipped trims. BCM/IPC configuration required. Trailer hitch wiring harness programming may be needed.
2 gateway, immobilizer, and security items documented across 2025-2026.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Infiniti Intelligent Key PEPS; ECM/BCM immobilizer; rolling code transponder (CONSULT-III Plus programmed)
- Add Key Yes - CONSULT-III Plus
- All Keys Lost Yes - CONSULT-III Plus (NATS all-keys-lost procedure)
Infiniti Intelligent Key (PEPS); rolling code transponder; CONSULT-programmed
IMMOBILIZER MODULES
Immobilizer Modules
Module 1 Bench clone required
service_notes indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- NATS 7 AES-secured system. Dealer PIN required for all-keys-lost. Add-key with working key via our diagnostic software.
KEY & FOB TYPES
Key & Fob Types
Intelligent Key (Proximity) OBD coding supported
service_notes indicates OBD programming or coding
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- NATS 7 Intelligent Key. Program via OBD with our key programming equipment. Working key or dealer PIN required for all-keys-lost.
Replacement Notes
Infiniti Intelligent Key PEPS; ECM/BCM immobilizer; rolling code transponder system. CONSULT-III Plus required for key programming and module replacement. Pin extraction: limited (aes encryption); akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Unibody (QX50/QX55) or body-on-frame (QX80); high-strength steel structure
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps); Nissan/Infiniti CAN; OBD2 DLC Pin 6/14
- Infotainment
- 12.3" Infiniti InTouch infotainment system; OTA partial (navigation maps only on non-Pro models)
- OTA Capable
- Yes
- ECU Unlock Supported
- No
- Custom Programming
- Yes
WHAT WE RESOLVE
3rd Gen Y63 (2025-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Mobileye EyeQ4) (2025), Forward Radar (Continental ARS 77GHz) (2025), Blind Spot Monitor - Left (BSM) (2025), and Blind Spot Monitor - Right (BSM) (2025). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Unit (2025) and SRS Control Unit (2026). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 2 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Infiniti QX80 (2025-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Infiniti QX80 (2025-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Infiniti QX80 (2025-2026)?
The Infiniti QX80 (2025-2026) generation currently shows 11 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Unit (2025) and SRS Control Unit (2026). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: K8820-7JA1C (2025) - confirm for your exact year/VIN.
Does Infiniti QX80 (2025-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 14 ADAS systems, including Forward Camera (Mobileye EyeQ4) (2025), Forward Radar (Continental ARS 77GHz) (2025), Blind Spot Monitor - Left (BSM) (2025), Blind Spot Monitor - Right (BSM) (2025), and Around View Monitor (AVM) - 360° Camera (2025). Calibration triggers include ECM Replacement, ABS/VDC Module Replacement, Windshield Replacement, and Front Bumper/Radar Service. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Infiniti QX80 (2025-2026)?
Yes. The generation data includes 2 SRS records, including SRS Control Unit (2025) and SRS Control Unit (2026). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: K8820-7JA1C (2025) - confirm for your exact year/VIN.
Do all Infiniti QX80 (2025-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2025-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Infiniti QX80 (2025-2026)?
Yes, where the VIN and security workflow support it. The generation data includes 2 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Infiniti QX80 (2025-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Infiniti QX80 (2025-2026) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
More QX80 generations
2nd Gen Y62 2020-2024 3rd Gen Y63 2025-2026 You are here