Infiniti Safety Shield: Forward Emergency Braking, Blind Spot Warning, Lane Depa
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2013-2021 Infiniti QX60 Generation Guide
Infiniti QX60 L50 (2013-2021) ADAS Calibration & Module Programming
Covers model years 2013-2021 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Infiniti QX60 built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform Nissan/Infiniti D-Platform L50 (shared with 2013-2021 Nissan Pathfinder)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Infiniti Intelligent Key with Smart Entry; rolling-code RF transponder immobilizer
The ADAS, module, and security rows below are consolidated across the full 2013-2021 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2013-2021”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Infiniti Qx60. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Warning (BSW) - Left Sensor, this Nissan/Infiniti D-Platform L50 (shared with 2013-2021 Nissan Pathfinder) platform vehicle, NATS / I-Key immobilizer support, Infiniti InTouch infotainment programming. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
Nissan/Infiniti D-Platform L50 (shared with 2013-2021 Nissan Pathfinder)
Production
2013-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Feature availability 3
Immobilizer: NATS / I-Key
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: Nissan/Infiniti D-Platform L50 (shared with 2013-2021 Nissan
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - infiniti not in openpilot support tree
Not in openpilot support tree as of April 2026. Infiniti not explicitly listed in Nissan values.py; no Infiniti ports.
Generation service summary for Infiniti QX60 L50 (2013-2021)
Generation coverage
This page consolidates Infiniti QX60 service data for 2013-2021 across 9 model years; 9 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 30 system records, including Forward Camera (Monocular) (2013-2014, 2021), Forward Radar (77GHz) (2013-2014, 2021), Blind Spot Warning (BSW) - Left Sensor (2013-2014, 2021), and Blind Spot Warning (BSW) - Right Sensor (2013-2014, 2021). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 15 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 33 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 5 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Infiniti QX60 2013-2021 span, with exact-year validation before service.
Get a quoteDo I need calibration?
ECM Replacement 2
2013-2019
Yes
CONSULT immobilizer work support + throttle position relearn.
2020-2021
Yes
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement 2
2013-2019
Yes
CONSULT ABS bleed + VDC sensor reset.
2020-2021
Yes
CONSULT ABS bleed + VDC sensor reset.
Windshield Replacement 2
2013, 2015-2019
Yes
ProPilot Assist forward camera (windshield-mounted) requires recalibration via CONSULT-III+.
2020-2021
Yes
ProPilot Assist forward camera (windshield-mounted) requires recalibration via CONSULT-III+.
Front Bumper/Radar Service 2
2013, 2015-2019
Yes
Front radar recalibration required after front bumper or radar service.
2020-2021
Yes
Front radar recalibration required after front bumper or radar service.
Rear Bumper/Radar Service 2
2013, 2015-2019
Yes
Rear cross-traffic radar recalibration after rear bumper work.
2020-2021
Yes
Rear cross-traffic radar recalibration after rear bumper work.
Steering Angle Sensor Replacement/Reset 2
2013, 2015-2019
Yes
ProPilot Assist lane centering requires steering angle sensor calibration.
2020-2021
Yes
ProPilot Assist lane centering requires steering angle sensor calibration.
Mirror Replacement 1
2014
Yes
Surround view mirror camera recalibration required after mirror R&R. Use CONSULT-III+.
Front Bumper Repair or Replacement 1
2014
Yes
Front surround view camera recalibration required after front bumper R&R. Use CONSULT-III+.
Rear Bumper Repair or Replacement 1
2014
Yes
Rear surround view camera recalibration required after rear bumper R&R. Use CONSULT-III+.
Year-by-year details
| Year | VIN split | Infotainment | Trim notes |
|---|---|---|---|
| 2013 | VIN pos 4-8 identifies model/body/engine. Infiniti WMI: JNK, 5N1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2014 | VIN pos 4-8 identifies model/body/engine. Infiniti WMI: JNK, 5N1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2015 | VIN pos 4-8 identifies model/body/engine. Infiniti WMI: JNK, 5N1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2016 | VIN pos 4-8 identifies model/body/engine. Infiniti WMI: JNK, 5N1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2017 | VIN pos 4-8 identifies model/body/engine. Infiniti WMI: JNK, 5N1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2018 | VIN pos 4-8 identifies model/body/engine. Infiniti WMI: JNK, 5N1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2019 | VIN pos 4-8 identifies model/body/engine. Infiniti WMI: JNK, 5N1. Position 4-5 = model. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | |
| 2020 | VIN pos 4-8 identifies model/body/engine. Infiniti WMI: JNK, 5N1. Position 4-5 = model. Position 10 = model year code. | Infiniti InTouch | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2021 | VIN pos 4-8 identifies model/body/engine. Infiniti WMI: JNK, 5N1. Position 4-5 = model. Position 10 = model year code. | Infiniti InTouch | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
30 ADAS systems documented across 2013-2021. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Infiniti Safety Shield: Forward Emergency Braking, Blind Spot Warning, Lane Departure Warning, Rear Cross Traffic Alert; no ProPilot standard
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) 2013-2014, 2021 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2021) | |
| Forward Radar (77GHz) 2013-2014, 2021 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2021) | |
| Blind Spot Warning (BSW) - Left Sensor 2013-2014, 2021 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2021) | |
| Blind Spot Warning (BSW) - Right Sensor 2013-2014, 2021 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2021) | |
| Surround View Camera System (AVM) 2013-2014, 2021 | Surround Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2021 - 4-CAMERA SYSTEM) | |
| Forward Camera (Monocular) 2015-2016 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2016) | |
| Forward Radar (77GHz) 2015-2016 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2016) | |
| Blind Spot Warning (BSW) - Left Sensor 2015-2016 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2016) | |
| Blind Spot Warning (BSW) - Right Sensor 2015-2016 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2016) | |
| Surround View Camera System (AVM) 2015-2016 | Surround Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2016 - 4-CAMERA SYSTEM) | |
| Forward Camera (Monocular) 2017 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2017) | |
| Forward Radar (77GHz) 2017 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2017) | |
| Blind Spot Warning (BSW) - Left Sensor 2017 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2017) | |
| Blind Spot Warning (BSW) - Right Sensor 2017 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2017) | |
| Surround View Camera System (AVM) 2017 | Surround Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2017 - 4-CAMERA SYSTEM) | |
| Forward Camera (Monocular) 2018 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2018) | |
| Forward Radar (77GHz) 2018 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2018) | |
| Blind Spot Warning (BSW) - Left Sensor 2018 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2018) | |
| Blind Spot Warning (BSW) - Right Sensor 2018 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2018) | |
| Surround View Camera System (AVM) 2018 | Surround Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2018 - 4-CAMERA SYSTEM) | |
| Forward Camera (Monocular) 2019 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2019) | |
| Forward Radar (77GHz) 2019 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2019) | |
| Blind Spot Warning (BSW) - Left Sensor 2019 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2019) | |
| Blind Spot Warning (BSW) - Right Sensor 2019 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2019) | |
| Surround View Camera System (AVM) 2019 | Surround Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2019 - 4-CAMERA SYSTEM) | |
| Forward Camera (Monocular) 2020 | Forward Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2020) | |
| Forward Radar (77GHz) 2020 | Front Radar | Radar | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2020) | |
| Blind Spot Warning (BSW) - Left Sensor 2020 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2020) | |
| Blind Spot Warning (BSW) - Right Sensor 2020 | Side Radar | Radar | Static + Dynamic | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2020) | |
| Surround View Camera System (AVM) 2020 | Surround Camera | Camera | Static | YES | ~(VERIFY VIA OUR DIAGNOSTIC SOFTWARE)(L50 QX60 2020 - 4-CAMERA SYSTEM) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement 2013-2019
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement 2013-2019
CONSULT ABS bleed + VDC sensor reset.
Windshield Replacement 2013, 2015-2019
ProPilot Assist forward camera (windshield-mounted) requires recalibration via CONSULT-III+.
Front Bumper/Radar Service 2013, 2015-2019
Front radar recalibration required after front bumper or radar service.
Rear Bumper/Radar Service 2013, 2015-2019
Rear cross-traffic radar recalibration after rear bumper work.
Steering Angle Sensor Replacement/Reset 2013, 2015-2019
ProPilot Assist lane centering requires steering angle sensor calibration.
Mirror Replacement 2014
Surround view mirror camera recalibration required after mirror R&R. Use CONSULT-III+.
Front Bumper Repair or Replacement 2014
Front surround view camera recalibration required after front bumper R&R. Use CONSULT-III+.
Rear Bumper Repair or Replacement 2014
Rear surround view camera recalibration required after rear bumper R&R. Use CONSULT-III+.
ECM Replacement 2020-2021
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement 2020-2021
CONSULT ABS bleed + VDC sensor reset.
Windshield Replacement 2020-2021
ProPilot Assist forward camera (windshield-mounted) requires recalibration via CONSULT-III+.
Front Bumper/Radar Service 2020-2021
Front radar recalibration required after front bumper or radar service.
Rear Bumper/Radar Service 2020-2021
Rear cross-traffic radar recalibration after rear bumper work.
Steering Angle Sensor Replacement/Reset 2020-2021
ProPilot Assist lane centering requires steering angle sensor calibration.
Modules we program on this generation
33 documented Infiniti QX60 modules across 2013-2021. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
SRS Control Unit Verify by VIN 2013-2015, 2017, 2021 985109NA8A
_years covers only 2013-2015, 2017, 2021 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2017, 2021
Always match the full part number before buying a used module.
- PART
- 985109NA8A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2016, 2020 98510-9NA8A
_years covers only 2016, 2020 for this generation
Used/donor module guide
Compatible donor years: 2016, 2020
Always match the full part number before buying a used module.
- PART
- 98510-9NA8A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2018 87600-9NF2A
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Always match the full part number before buying a used module.
- PART
- 87600-9NF2A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2018-2019 985P1-9NF9A
_years covers only 2018-2019 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
- PART
- 985P1-9NF9A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU MODULES
ECU Modules
Engine Control Module (ECM) Verify by VIN 2013-2014, 2018-2021
_years covers only 2013-2014, 2018-2021 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- NATS 7 / AES-128
- CODING
- Yes
- CLONE
- No
- NOTES
- ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Online server authentication required. Cloning not supported on 2018+ VIN-locked units.
Transmission Control Module (TCM) Verify by VIN 2013-2014, 2018-2021
_years covers only 2013-2014, 2018-2021 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- NATS 7 / AES-128
- CODING
- Yes
- CLONE
- No
- NOTES
- TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning not supported.
Body Control Module (BCM) Verify by VIN 2013-2014, 2018-2021
_years covers only 2013-2014, 2018-2021 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- NATS 7 / AES-128
- CODING
- Yes
- CLONE
- No
- NOTES
- BCM requires coding to vehicle VIN after replacement. Security gateway access required on 2018+ models. All comfort/convenience modules must be re-synced via our diagnostic software.
Engine Control Module (ECM) Verify by VIN 2015-2017
_years covers only 2015-2017 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- NATS 7 / AES-128
- CODING
- Yes
- CLONE
- Yes
- NOTES
- ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Cloning supported on pre-2018 units.
Transmission Control Module (TCM) Verify by VIN 2015-2017
_years covers only 2015-2017 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- NATS 7 / AES-128
- CODING
- Yes
- CLONE
- Yes
- NOTES
- TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning supported on pre-2018 automatic units.
Body Control Module (BCM) Verify by VIN 2015-2017
_years covers only 2015-2017 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- NATS 7 / AES-128
- CODING
- Yes
- CLONE
- Yes
- NOTES
- BCM requires coding to vehicle VIN after replacement. Door/window and lighting modules re-sync recommended after BCM swap.
BCM MODULES
BCM Modules
BCM (Body Control Module) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Nissan BCM. CONSULT-III+ work support for key registration + module ID.
BCM (Body Control Module) Verify by VIN 2015-2021
_years covers only 2015-2021 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- NOTES
- Infiniti BCM. CONSULT-III+ required for VIN registration, option code programming, NATS sync. ProPilot Assist forward camera + radar recalibration required after BCM replacement.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - CVT-8 Continuously Variable Transmission Verify by VIN 2013-2014 31036
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- PART
- 31036
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH72543
- NOTES
- CVT relearn required via CONSULT III+. Use Nissan CVT Fluid NS-3 only. Throttle position relearn mandatory after TCM replacement.
TCU - CVT (Continuously Variable Transmission) Verify by VIN 2015-2016 31036
_years covers only 2015-2016 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016
Donor must match part family 31036 - requires cloning
Always match the full part number before buying a used module.
- PART
- 31036
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7058
- NOTES
- CVT relearn required after programming. Use CONSULT III+ or equivalent. CVT fluid NS-3 required. VIN coding mandatory.
TCU - CVT7 CVT Verify by VIN 2017-2018 31036-1XA0
_years covers only 2017-2018 for this generation
Used/donor module guide
Compatible donor years: 2017, 2018
Donor must match part family 31036-1XA0 - requires cloning
Always match the full part number before buying a used module.
- PART
- 31036-1XA0
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7263
- NOTES
- CVT relearn required after programming. Use CONSULT III+ tool. Nissan CVT NS-3 fluid spec. TCU adaptation takes 10-15 drive cycles.
TCU - CVT8 Continuously Variable Transmission Verify by VIN 2019-2020 31036
_years covers only 2019-2020 for this generation
Used/donor module guide
Compatible donor years: 2019, 2020
Donor must match part family 31036; VIN-locked - requires cloning
Always match the full part number before buying a used module.
- PART
- 31036
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH72543
- NOTES
- CVT relearn required after programming. Use CONSULT III+ or equivalent. NS-3 CVT fluid specification. VIN and immobilizer coding mandatory.
TCU - CVT8 Continuously Variable Transmission Verify by VIN 2021 31036
_years covers only 2021 for this generation
Used/donor module guide
Compatible donor years: 2021
Always match the full part number before buying a used module.
- PART
- 31036
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7269
- NOTES
- Requires CONSULT III+ or equivalent, CVT relearn procedure mandatory, NS-3 CVT fluid specification, VIN coding essential
ABS / BRAKE MODULES
ABS / Brake Modules
ABS Actuator and Electric Unit (Control Unit) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- NOTES
- Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- NOTES
- Active sensor.
ABS Actuator and Electric Unit (Control Unit) Verify by VIN 2015-2021
_years covers only 2015-2021 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- NOTES
- Nissan/Infiniti ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support. Verify VDC function post-replacement.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) x6
24810-3JA0A Verify by VIN 2013, 2015
_years covers only 2013, 2015 for this generation
Used/donor module guide
Compatible donor years: 2013, 2015
Donor must match part family 24810-3JA0A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3JA0A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-3JA1A Verify by VIN 2014, 2016
_years covers only 2014, 2016 for this generation
Used/donor module guide
Compatible donor years: 2014, 2016
Donor must match part family 24810-3JA1A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3JA1A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-3JA2A Verify by VIN 2017
_years covers only 2017 for this generation
Used/donor module guide
Compatible donor years: 2017
Donor must match part family 24810-3JA2A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3JA2A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-3JA3A Verify by VIN 2018
_years covers only 2018 for this generation
Used/donor module guide
Compatible donor years: 2018
Donor must match part family 24810-3JA3A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3JA3A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-3JA4A Verify by VIN 2019
_years covers only 2019 for this generation
Used/donor module guide
Compatible donor years: 2019
Donor must match part family 24810-3JA4A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-3JA4A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
24810-9NF0A Verify by VIN 2020-2021
_years covers only 2020-2021 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021
Donor must match part family 24810-9NF0A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-9NF0A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) x3
Part 1 Verify by VIN 2013-2019
_years covers only 2013-2019 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Part 2 Verify by VIN 2013-2019
_years covers only 2013-2019 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- cross-year extension)
Part 3 Verify by VIN 2020-2021
_years covers only 2020-2021 for this generation
Used/donor module guide
Compatible donor years: 2020, 2021
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (spiral cable 25554 family)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Infiniti InTouch 8" touchscreen with Navigation Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- NOTES
- Programming required after replacement. Verify software version compatibility before install.
Remote Start Verify by VIN 2015-2017
_years covers only 2015-2017 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017
Always match the full part number before buying a used module.
- NOTES
- Factory remote start. BCM configuration required after replacement on equipped vehicles.
Remote Start Verify by VIN 2018-2021
_years covers only 2018-2021 for this generation
Used/donor module guide
Compatible donor years: 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- NOTES
- Factory remote start. BCM configuration required after replacement on equipped vehicles.
5 gateway, immobilizer, and security items documented across 2013-2021.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System NATS / I-Key
- Add Key Yes
- All Keys Lost Yes
Infiniti Intelligent Key with Smart Entry; rolling-code RF transponder immobilizer
IMMOBILIZER MODULES
Immobilizer Modules
NATS (Nissan Anti-Theft System) - IPDM/BCM Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Nissan NATS5/NATS6. CONSULT-III+ IMMO registration. AKL: CONSULT PIN extraction possible pre-2015.
Module 2 Verify by VIN 2015-2021
_years covers only 2015-2021 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- NOTES
- NATS 7 AES-secured system. Dealer PIN required for all-keys-lost. Add-key with working key via our diagnostic software.
KEY & FOB TYPES
Key & Fob Types
Nissan Transponder Key (ID46 / NATS chip) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- ID46 Philips. CONSULT-III+ registration or aftermarket (Autel). Max 4 keys (NATS5).
Nissan Intelligent Key (Proximity) Verify by VIN 2013-2014
_years covers only 2013-2014 for this generation
Used/donor module guide
Compatible donor years: 2013, 2014
Always match the full part number before buying a used module.
- NOTES
- Push-to-start. CONSULT registration. Max 4 keys.
Intelligent Key (Proximity) Verify by VIN 2015-2021
_years covers only 2015-2021 for this generation
Used/donor module guide
Compatible donor years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
- NOTES
- NATS 7 Intelligent Key. Program via OBD with our key programming equipment. Working key or dealer PIN required for all-keys-lost.
Replacement Notes
NATS / I-Key system. CONSULT-III Plus required for key programming and module replacement. Pin extraction: limited (aes encryption); akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Unibody, high-strength steel; CVT-equipped transverse FWD/AWD layout
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Infiniti InTouch 8" touchscreen with Navigation; Around View Monitor (AVM 360°); Bose premium audio optional
- OTA Capable
- No
- Infotainment Name
- Infiniti InTouch
- ECU Unlock Supported
- No
- Custom Programming
- Yes
WHAT WE RESOLVE
L50 (2013-2021) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Monocular) (2013-2014, 2021), Forward Radar (77GHz) (2013-2014, 2021), Blind Spot Warning (BSW) - Left Sensor (2013-2014, 2021), and Blind Spot Warning (BSW) - Right Sensor (2013-2014, 2021). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Unit (2013-2015, 2017, 2021), SRS Control Unit (2016, 2020), and SRS Control Unit (2018). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 5 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Infiniti QX60 (2013-2021) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Infiniti QX60 (2013-2021). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Infiniti QX60 (2013-2021)?
The Infiniti QX60 (2013-2021) generation currently shows 21 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Unit (2013-2015, 2017, 2021), SRS Control Unit (2016, 2020), and SRS Control Unit (2018). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 985109NA8A (2013-2015, 2017, 2021) - confirm for your exact year/VIN.
Does Infiniti QX60 (2013-2021) need ADAS calibration after glass or collision work?
The merged generation data documents 30 ADAS systems, including Forward Camera (Monocular) (2013-2014, 2021), Forward Radar (77GHz) (2013-2014, 2021), Blind Spot Warning (BSW) - Left Sensor (2013-2014, 2021), Blind Spot Warning (BSW) - Right Sensor (2013-2014, 2021), and Surround View Camera System (AVM) (2013-2014, 2021). Calibration triggers include ECM Replacement (2013-2019), ABS/VDC Module Replacement (2013-2019), Windshield Replacement (2013, 2015-2019), and Front Bumper/Radar Service (2013, 2015-2019). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Infiniti QX60 (2013-2021)?
Yes. The generation data includes 4 SRS records, including SRS Control Unit (2013-2015, 2017, 2021), SRS Control Unit (2016, 2020), and SRS Control Unit (2018). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 985109NA8A (2013-2015, 2017, 2021) - confirm for your exact year/VIN.
Do all Infiniti QX60 (2013-2021) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2013-2021; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Infiniti QX60 (2013-2021)?
Yes, where the VIN and security workflow support it. The generation data includes 5 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Infiniti QX60 (2013-2021)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Infiniti QX60 (2013-2021) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
More QX60 generations
L50 2013-2021 You are here L51 2022-2026