Electronic systems coverage
This 2008 Honda Odyssey page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systems 3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.
2008 Honda Odyssey Supported Services
2008 Honda Odyssey
ADAS calibration, module programming, and security relearns
Full ADAS calibration, module programming, and key security work for the 2008 Honda Odyssey. Mobile service is available in the Dallas/Fort Worth service area; mail-in is temporarily unavailable.
Technical snapshot
- Platform RL3 (4th Gen, 2005-2010)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Honda EEPROM-based transponder (ID46 compatible, 2001-2014); 4-track or HON66 key blank; no OBD PIN extraction (EEPROM read required); AKL requires Honda iN dealer authorization + HDS
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2008 Honda Odyssey. On this vehicle we cover documented systems include Rear View Camera, this RL3 (4th Gen, 2005-2010) platform vehicle, HISS / Honda Smart Entry immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
RL3 (4th Gen, 2005-2010)
Production
2005-present
Trim Levels
-
Drivetrain
FWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Exact-year service summary for 2008 Honda Odyssey
Programmable modules
This page indexes 24 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and SAS coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2008 Honda Odyssey.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2008 Honda Odyssey using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Immobilizer: HISS / Honda Smart Entry - Standard; Platform: RL3 (4th Gen, 2005-2010) - Confirmed
Driver-assist suite
No ADAS suite - pre-Honda Sensing generation. Rear camera standard where equipped.
Infotainment context
Honda AM/FM stereo; CD player; Bluetooth (select trims); Aux input; navigation available
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Honda HDS / i-HDS / Honda Diagnostic Software
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2008 Honda Odyssey. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
2 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
13 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
3 modules documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
Feature availability 2
Immobilizer: HISS / Honda Smart Entry
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: RL3 (4th Gen, 2005-2010)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Honda Odyssey issues we resolve on this platform: Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - RL3 (4th Gen, 2005-2010) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - HISS / Honda Smart Entry immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No ADAS suite - pre-Honda Sensing generation. Rear camera standard where equipped.
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera | Rear Camera | Camera | None | Conditional | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM/PCM Replacement
HDS immobilizer registration + throttle position learn.
VSA Module Replacement
HDS VSA initialization + steering angle zero-point.
SRS MODULES
SRS Modules
SRS Control Unit x13
77960-SHJ-A013-M1 Under center console
- PART
- 77960-SHJ-A013-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-A014-M1 Under center console
- PART
- 77960-SHJ-A014-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-A015 Under center console
- PART
- 77960-SHJ-A015
- LOCATION
- Under center console
- MFG
- Denso
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-A015-M1 Under center console
- PART
- 77960-SHJ-A015-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-A017-M1 Under center console
- PART
- 77960-SHJ-A017-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-A020-M1 Under center console
- PART
- 77960-SHJ-A020-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-C012-M1 Under center console
- PART
- 77960-SHJ-C012-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-C014-M1 Under center console
- PART
- 77960-SHJ-C014-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-C022-M1 Under center console
- PART
- 77960-SHJ-C022-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-L014-M1 Under center console
- PART
- 77960-SHJ-L014-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-L022-M1 Under center console
- PART
- 77960-SHJ-L022-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-X020-M1 Under center console
- PART
- 77960-SHJ-X020-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95640
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
77960-SHJ-Y015-M1 Under center console
- PART
- 77960-SHJ-Y015-M1
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 95320
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
ECU MODULES
ECU Modules
Powertrain Control Module (PCM) - Keihin J35A6 3.5L V6 5AT (non-VCM) 37820-RGL-A96
- PART
- 37820-RGL-A96
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Keihin (Hitachi SH-2 family)
- NOTES
- 2008 Odyssey LX/EX 3.5L J35A6 (non-VCM). Continuation of RGL family from 2007.
Powertrain Control Module (PCM) - Keihin J35A7 3.5L V6 5AT (VCM-2) 37820-RGW-A51
- PART
- 37820-RGW-A51
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Keihin (Hitachi SH-2 family)
- NOTES
- 2008 Odyssey EX-L/Touring 3.5L J35A7 (VCM-2 - upgraded from VCM-1 with this MY). Note: VCM-2 ECU family (RGW) is distinct from prior VCM-1 family (RGM).
BCM MODULES
BCM Modules
BCM (Body Control Module)
- NOTES
- Honda BCM. HDS programming after replacement.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 5AT 5-Speed Auto 28100-RGL
- PART
- 28100-RGL
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7055
- NOTES
- Requires HDS tool for initial setup and adaptation. ATF DW-1 specification. TCU relearn via drive cycle after programming.
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/VSA Modulator-Control Unit
- NOTES
- Honda VSA unit. HDS initialization + bleed procedure. Steering angle sensor zero-point.
Wheel Speed Sensor - Front (each)
- NOTES
- 54t reluctor ring. Replace if DTC 11-1/12-1 set.
Wheel Speed Sensor - Rear (each)
- NOTES
- Rear WSS.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Display Audio Head Unit (9") 39100-THR-C01
- PART
- 39100-THR-C01
- NOTES
- HDS diagnostic. Wireless CarPlay/Android Auto Touring+. Final model year - verify iN availability.
Rear Entertainment System (10.2") 39100-THR-B01
- PART
- 39100-THR-B01
- NOTES
- Touring/Elite. Verify display + HDMI + headphones.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System HISS / Honda Smart Entry
- Add Key Yes
- All Keys Lost Yes
Honda EEPROM-based transponder (ID46 compatible, 2001-2014); 4-track or HON66 key blank; no OBD PIN extraction (EEPROM read required); AKL requires Honda iN dealer authorization + HDS
IMMOBILIZER MODULES
Immobilizer Modules
Immobilizer Control Unit (IMMU)
- NOTES
- Honda immobilizer. HDS code input required for key registration. AKL requires Honda iN dealer PIN.
KEY & FOB TYPES
Key & Fob Types
Honda Transponder Key (ID46 / EEPROM)
- NOTES
- Cut and program. HDS key registration. AKL requires PIN from Honda iN.
Honda Smart Key (FOB, push-to-start)
- NOTES
- Proximity key. HDS registration. Max 6 keys.
Replacement Notes
HISS / Honda Smart Entry system. HDS (Honda Diagnostic System) required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Honda ACE Unibody - High-Tensile / Ultra-High-Tensile Steel
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Honda AM/FM stereo; CD player; Bluetooth (select trims); Aux input; navigation available
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2008 - 2.4i VTEC (K24), 3.5L V6 (J35Z8).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2008 Honda Odyssey?
ADAS calibration pricing for a 2008 Honda Odyssey depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2008 Honda Odyssey?
Yes. The 2008 Honda Odyssey uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 77960-SHJ-A013-M1. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2008 Honda Odyssey?
After windshield replacement on a 2008 Honda Odyssey, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2008 Honda Odyssey module service take?
Most 2008 Honda Odyssey onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 12 programmable modules documented in our database (2 ECU, 1 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2008 Honda Odyssey on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2008 Honda Odyssey. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2008 Honda Odyssey programming?
Every programming, cloning, and calibration job on the 2008 Honda Odyssey is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2008 Honda Odyssey with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2008 Honda Odyssey. Immobilizer generation on this platform: HISS / Honda Smart Entry. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2008 Honda Odyssey can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2008 Honda Odyssey. For this vehicle our database documents:
- 2 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 2 steering angle sensor (SAS)
- 1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2008 Honda Odyssey covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- 37820-RGL-A96, 37820-RGW-A51
- TCU / TCM Part Numbers
- 28100-RGL
- SRS / Airbag Module Part Numbers
- 77960-SHJ-A013-M1, 77960-SHJ-A014-M1, 77960-SHJ-A015, 77960-SHJ-A015-M1, 77960-SHJ-A017-M1, 77960-SHJ-A020-M1, 77960-SHJ-C012-M1, 77960-SHJ-C014-M1, 77960-SHJ-C022-M1, 77960-SHJ-L014-M1, 77960-SHJ-L022-M1, 77960-SHJ-X020-M1, 77960-SHJ-Y015-M1
- Transmission Control Module (TCM) Part Numbers
- 28100-RGL
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2008 Honda Odyssey
These vehicles use one or more of the same replacement modules indexed for this vehicle.