Skip to main content
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth

No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.

2008 Honda Accord Supported Services

2008 Honda Accord

ADAS calibration, module programming, and security relearns

Full ADAS calibration, module programming, and key security work for the 2008 Honda Accord. Mobile service is available in the Dallas/Fort Worth service area; mail-in is temporarily unavailable.

Technical snapshot
  • Platform CP/CU (8th Gen, 2008-2012)
  • CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
  • Security Honda EEPROM-based transponder (ID46 compatible, 2001-2014); 4-track or HON66 key blank; no OBD PIN extraction (EEPROM read required); AKL requires Honda iN dealer authorization + HDS
OVERVIEW

Expert ADAS calibration, module programming, and diagnostic recovery for the 2008 Honda Accord. On this vehicle we cover documented systems include Rear View Camera, this CP/CU (8th Gen, 2008-2012) platform vehicle, HISS / Honda Smart Entry immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.

Platform
CP/CU (8th Gen, 2008-2012)
Production
2008-present
Trim Levels
-
Drivetrain
FWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
SERVICE SNAPSHOT

Exact-year service summary for 2008 Honda Accord

Electronic systems coverage

This 2008 Honda Accord page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.

View systems

Programmable modules

This page indexes 15 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and SAS coverage.

View modules

Gateway and security

This page includes 3 gateway, immobilizer, or key-security records for this 2008 Honda Accord.

View security

Core Auto Logic capability

Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2008 Honda Accord using the documented module data on this page.

Choose a section
EXACT-YEAR DIFFERENTIATORS

What changes on this exact year

Feature availability

Immobilizer: HISS / Honda Smart Entry - Standard; Platform: CP/CU (8th Gen, 2008-2012) - Confirmed

Driver-assist suite

No ADAS suite - pre-Honda Sensing generation. Rear camera standard where equipped.

Infotainment context

Honda AM/FM stereo; CD player; Bluetooth (select trims); Aux input; navigation available

Network and access

CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14

TOOL ACCESS MATRIX

Tool access for this exact year

Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.

Factory scan, coding, and calibration access

Honda HDS / i-HDS / Honda Diagnostic Software

Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.

OEM subscription required

Make-level OEM tool map plus exact-year gateway and ADAS fields.

ADAS scan, setup, and verification

Autel, Launch Tech, Topdon

Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.

Tool subscription required

Service-level scanner-vendor source packet plus exact-year ADAS records.

Bench cloning and chip-level recovery

Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog

Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.

Bench/chip-level only

Bench programmer source packet plus exact-year module/security records.

Choose a section to view data

SUPPORTED SYSTEMS

What we service on this vehicle

Documented module coverage for the 2008 Honda Accord. Counts reflect modules our techs have programmed or calibrated on this exact platform.

Engine / ECU Programming
4 modules documented

Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.

Open Modules tab
BCM / Body Programming
1 module documented

Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.

Open Modules tab
TCU / Transmission
1 module documented

Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.

Open Modules tab
SRS / Airbag Reset
2 modules documented

Crash-data clear, hard-code reset and replacement airbag module configuration.

Open Modules tab
ABS / Brake Module
3 modules documented

ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.

Open Modules tab
Key Security & Immobilizer
1 module documented

Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.

Open Security tab
IPC, SAS & Other Modules
2 modules documented

Instrument cluster cloning, steering angle sensor calibration and other supporting modules.

Open Modules tab
Connectivity & Accessories
2 modules documented

Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.

Open Modules tab

Need something not listed? Most undocumented modules can still be programmed.

Feature availability 2

Immobilizer: HISS / Honda Smart Entry

Standard

Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.

Platform: CP/CU (8th Gen, 2008-2012)

Confirmed

Verify platform code matches when cross-referencing part numbers across model years.

WHAT WE RESOLVE

Common issues on this vehicle

Common Honda Accord issues we resolve on this platform: Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - CP/CU (8th Gen, 2008-2012) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - HISS / Honda Smart Entry immobilizer; all-keys-lost supported.

ADAS CALIBRATION MATRIX

ADAS systems on this vehicle

No ADAS suite - pre-Honda Sensing generation. Rear camera standard where equipped.

Scroll for part numbers and Details
SystemTypeCategoryCal. TypeSupportedPart #Actions
Rear View CameraRear CameraCameraNone Conditional-
WHEN IS CALIBRATION REQUIRED?

Triggers for ADAS recalibration

ECM/PCM Replacement

HDS immobilizer registration + throttle position learn.

VSA Module Replacement

HDS VSA initialization + steering angle zero-point.

SRS MODULES

SRS Modules

SRS Control Unit 77960-TE0-A012-M1
PART
77960-TE0-A012-M1
LOCATION
Under center console
MFG
Denso
CHIP/MCU
95640
NOTES
Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
SRS Control Unit 77960-TE0-Y012-M1
PART
77960-TE0-Y012-M1
LOCATION
Under center console
MFG
Denso
CHIP/MCU
95640
NOTES
Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
ECU MODULES

ECU Modules

Powertrain Control Module (PCM) - Keihin K24Z3 2.4L AT 37820-R40-A57
PART
37820-R40-A57
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Keihin (Hitachi SH-2 family)
NOTES
2008-2009 Accord 2.4L K24Z3 automatic. Honda Accord 8th gen CP/CU US-market sedan and coupe.
Powertrain Control Module (PCM) - Keihin K24Z3 2.4L AT (rewritable) 37820-R40-A41
PART
37820-R40-A41
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Keihin (Hitachi SH-2 family)
NOTES
2008-2009 Accord 2.4L K24Z3 ECM rewritable variant. Federal emissions calibration; PZEV trims may use a different revision.
Powertrain Control Module (PCM) - Keihin J35Z2 3.5L V6 AT (sedan) 37820-R70-A59
PART
37820-R70-A59
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Keihin (Hitachi SH-2 family)
NOTES
2008-2009 Accord 3.5L V6 J35Z2 automatic sedan. Federal emissions, AT-only sedan trim. Rewritable revision.
Powertrain Control Module (PCM) - Keihin J35Z3 3.5L V6 6MT (coupe) 37820-R72-A11
PART
37820-R72-A11
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Keihin (Hitachi SH-2 family)
NOTES
2008-2009 Accord 3.5L V6 6-speed manual coupe (CS - V6 6MT coupe was the only J35Z3 application; non-VCM). Replaces 37820-R72-A06/A07/A08/A09.
BCM MODULES

BCM Modules

BCM (Body Control Module)
NOTES
Honda BCM. HDS programming after replacement.
TCU / TCM TRANSMISSION MODULES

TCU / TCM Transmission Modules

TCU - 5AT 5-Speed Auto 28100-R06
PART
28100-R06
PROTOCOL
J2534
CODING
Yes
CLONE
Yes
CHIP/MCU
Renesas SH7058
NOTES
Honda HDS or J2534 tool required. Honda ATF DW-1 spec. TCM relearn via idle procedure. VIN coding required.
ABS / BRAKE MODULES

ABS / Brake Modules

ABS/VSA Modulator-Control Unit
NOTES
Honda VSA unit. HDS initialization + bleed procedure. Steering angle sensor zero-point.
Wheel Speed Sensor - Front (each)
NOTES
54t reluctor ring. Replace if DTC 11-1/12-1 set.
Wheel Speed Sensor - Rear (each)
NOTES
Rear WSS.
OTHER MODULES (IPC, SAS)

Other Modules (IPC, SAS)

Steering Angle Sensor (SAS)
CODING
Yes
NOTES
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
CODING
Yes
NOTES
cross-year extension)
CONNECTIVITY & ACCESSORIES

Connectivity & Accessories

Display Audio 12.3" (11th Gen) 39100-30A-A01 (VERIFY VIA HONDA IN)
PART
39100-30A-A01 (VERIFY VIA HONDA IN)
NOTES
HDS diagnostic + VIN registration. Google built-in. Wireless CarPlay/Android Auto. Honda Connect.
IPC (11th Gen) 78100-30A-A01 (VERIFY VIA HONDA IN)
PART
78100-30A-A01 (VERIFY VIA HONDA IN)
NOTES
HDS programming + VIN registration. 11th Gen unit.
KEY SECURITY & IMMOBILIZER

Key Security & Immobilizer

  • System HISS / Honda Smart Entry
  • Add Key Yes
  • All Keys Lost Yes

Honda EEPROM-based transponder (ID46 compatible, 2001-2014); 4-track or HON66 key blank; no OBD PIN extraction (EEPROM read required); AKL requires Honda iN dealer authorization + HDS

IMMOBILIZER MODULES

Immobilizer Modules

Immobilizer Control Unit (IMMU)
NOTES
Honda immobilizer. HDS code input required for key registration. AKL requires Honda iN dealer PIN.
KEY & FOB TYPES

Key & Fob Types

Honda Transponder Key (ID46 / EEPROM)
NOTES
Cut and program. HDS key registration. AKL requires PIN from Honda iN.
Honda Smart Key (FOB, push-to-start)
NOTES
Proximity key. HDS registration. Max 6 keys.

Replacement Notes

HISS / Honda Smart Entry system. HDS (Honda Diagnostic System) required for key programming and module replacement. No obd pin extraction; akl supported.

ARCHITECTURE & CONNECTIVITY

Architecture & Connectivity

Body Construction
Honda ACE Unibody - Advanced High-Strength Steel (11th Gen)
OBD Protocol
ISO 15765-4 CAN (500 kbps)
CAN Architecture
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Infotainment
Honda AM/FM stereo; CD player; Bluetooth (select trims); Aux input; navigation available
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed
Reviewed coverage: 2008 - 2.0i VTEC (R20A), 2.2 i-DTEC, 2.2L i-CTDi (N22A2), 2.2L i-DTEC (N22A2), 2.4 i-VTEC (K24Z), 2.4L (K24Z2), 3.5 V6 (J35Z).
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS

FAQ

How much does ADAS calibration cost for a 2008 Honda Accord?

ADAS calibration pricing for a 2008 Honda Accord depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.

Can you reset the airbag light on a 2008 Honda Accord?

Yes. The 2008 Honda Accord uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 77960-TE0-A012-M1. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.

What is needed after replacing the windshield on a 2008 Honda Accord?

After windshield replacement on a 2008 Honda Accord, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.

How long does a 2008 Honda Accord module service take?

Most 2008 Honda Accord onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (4 ECU, 1 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.

Do you cover the 2008 Honda Accord on-site, or is this mail-in only?

We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2008 Honda Accord. Do not ship a module unless support confirms next steps.

What kind of warranty do you offer on 2008 Honda Accord programming?

Every programming, cloning, and calibration job on the 2008 Honda Accord is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.

Can you program a 2008 Honda Accord with no working keys (all-keys-lost)?

Yes - all-keys-lost is supported on the 2008 Honda Accord. Immobilizer generation on this platform: HISS / Honda Smart Entry. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.

Which modules on a 2008 Honda Accord can you actually service?

We program, clone, repair, or replace the full programmable-module stack on a 2008 Honda Accord. For this vehicle our database documents:

  • 4 engine control (ECU/PCM)
  • 1 transmission control (TCU/TCM)
  • 1 body control (BCM and related)
  • 3 ABS / brake control (EBCM)
  • 1 immobilizer / security
  • 2 key & fob
  • 2 steering angle sensor (SAS)
  • 1 ADAS module

Send the VIN and the operations performed and we will confirm support and pricing.

Additional Module Part Numbers

Additional OEM-sourced part numbers for the 2008 Honda Accord covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.

ECU / PCM Part Numbers
37820-R40-A57, 37820-R40-A41, 37820-R70-A59, 37820-R72-A11
TCU / TCM Part Numbers
28100-R06
SRS / Airbag Module Part Numbers
77960-TE0-A012-M1, 77960-TE0-Y012-M1
Transmission Control Module (TCM) Part Numbers
28100-R06

Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.

Different trim or build?

Send your VIN and we'll confirm exact module support and pricing in the quote response.

Hit a security wall? We've got the keys.

1-year unlimited warranty on every flash and calibration.

(945) 382-4065

Shared module fitment

Vehicles sharing modules with the 2008 Honda Accord

These vehicles use one or more of the same replacement modules indexed for this vehicle.