We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
8th Gen CU - 2008-2012 generation coverage
2008-2012 Honda Accord service guide Module Programming & Diagnostics
Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.
What do you need fixed?
Choose a service to start your quote.
Find your module
35 documented Honda Accord module records across the 2008-2012 generation. Search by module name or part number, then open a result for requirements and repair options.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ECU / Engine
Powertrain Control Module (PCM) - Keihin K24Z3 2.4L AT 2 records
J2534
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 37820-R40-A57
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Keihin (Hitachi SH-2 family)
- Notes
- 2008-2009 Accord 2.4L K24Z3 automatic. Honda Accord 8th gen CP/CU US-market sedan and coupe.
J2534
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 37820-R40-A92
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Keihin (Hitachi SH-2 family)
- Notes
- 2009 Accord 2.4L K24Z3 ECM. Compatible/successor revisions: A41/A57/A58/A59. Same A92 part used as 2008 superseder.
Powertrain Control Module (PCM) - Keihin K24Z3 2.4L AT (rewritable) Verify by VIN 2008 1 record
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 37820-R40-A41
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Keihin (Hitachi SH-2 family)
- Notes
- 2008-2009 Accord 2.4L K24Z3 ECM rewritable variant. Federal emissions calibration; PZEV trims may use a different revision.
Powertrain Control Module (PCM) - Keihin J35Z2 3.5L V6 AT (sedan) 2 records
J2534
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 37820-R70-A59
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Keihin (Hitachi SH-2 family)
- Notes
- 2008-2009 Accord 3.5L V6 J35Z2 automatic sedan. Federal emissions, AT-only sedan trim. Rewritable revision.
J2534
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 37820-R70-A59
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Keihin (Hitachi SH-2 family)
- Notes
- 2009 Accord 3.5L V6 J35Z2 sedan. Same PN family as 2008. Rewritable revision.
Powertrain Control Module (PCM) - Keihin J35Z3 3.5L V6 6MT (coupe) 2 records
J2534
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 37820-R72-A11
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Keihin (Hitachi SH-2 family)
- Notes
- 2008-2009 Accord 3.5L V6 6-speed manual coupe (CS - V6 6MT coupe was the only J35Z3 application; non-VCM). Replaces 37820-R72-A06/A07/A08/A09.
J2534
Documented for 2009 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 37820-R72-A11
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Keihin (Hitachi SH-2 family)
- Notes
- 2009 Accord 3.5L V6 6MT coupe J35Z3. Part 37820-R72-A11 same as 2008. V6 6MT coupe was rare option (CS - V6 Coupe Manual).
ECM/PCM - 2.4L K24 I4 / 3.5L J35 V6 Verify by VIN 2010-2012 1 record
Documented for 2010-2012 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010, 2011, 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Honda Accord ECM. HDS immobilizer registration required.
TCM / Transmission
TCU - 5AT 5-Speed Auto Verify by VIN 2008 28100-R06
Documented for 2008 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008
Donor must match part family 28100-R06 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 28100-R06
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Honda HDS or J2534 tool required. Honda ATF DW-1 spec. TCM relearn via idle procedure. VIN coding required.
TCU - 5AT 5-Speed Auto Verify by VIN 2009-2011 28100-R06
Documented for 2009-2011 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2009, 2010, 2011
Donor must match part family 28100-R06 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 28100-R06
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Honda HDS or J2534 tool required. Honda ATF DW-1 spec. TCM relearn via idle procedure.
TCU - 5AT 5-Speed Auto Verify by VIN 2012 28100-R06
Documented for 2012 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2012
Donor must match part family 28100-R06 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 28100-R06
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas SH7058
- Notes
- Honda HDS or J2534 tool required. Honda ATF DW-1 spec. TCM relearn via idle procedure. Final year 8th Gen.
BCM / Body electronics
BCM (Body Control Module) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Honda BCM. HDS programming after replacement.
SRS / Airbag
SRS Control Unit 13 records
Under center console
Documented for 2008-2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008, 2009, 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TE0-A012-M1
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2008-2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2008, 2009, 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TE0-Y012-M1
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TA0-A011-M4
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TA0-A020-M4
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TA0-A031-M4
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TA0-A202-M4
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TA0-K011-M4-5WK43991
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TA0-L010-M4
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TA0-L020-M4
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TA0-X011-M4-5WK44012
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TA0-X020-M4
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TA0-X031-M4-5WK44375
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
Under center console
Documented for 2011-2012 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2011, 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 77960-TE1-A010-M1
- Location
- Under center console
- Manufacturer
- Denso
- Chip / MCU
- 95640
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
ABS / Brakes
ABS/VSA Modulator-Control Unit Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Honda VSA unit. HDS initialization + bleed procedure. Steering angle sensor zero-point.
Wheel Speed Sensor - Front (each) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- 54t reluctor ring. Replace if DTC 11-1/12-1 set.
Wheel Speed Sensor - Rear (each) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- Rear WSS.
Other modules
Instrument Panel Cluster (IPC) Verify by VIN 2010 78100-TA0-A13
Documented for 2010 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2010
Donor must match part family 78100-TA0-A13 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 78100-TA0-A13
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2011 78100-TA0-A23
Documented for 2011 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2011
Donor must match part family 78100-TA0-A23 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 78100-TA0-A23
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2012 78100-TA0-A33
Documented for 2012 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2012
Donor must match part family 78100-TA0-A33 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 78100-TA0-A33
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity / Accessories
Display Audio 12.3" (11th Gen) Verify by VIN 39100-30A-A01 (VERIFY VIA HONDA IN)
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 39100-30A-A01 (VERIFY VIA HONDA IN)
- Notes
- HDS diagnostic + VIN registration. Google built-in. Wireless CarPlay/Android Auto. Honda Connect.
IPC (11th Gen) Verify by VIN 78100-30A-A01 (VERIFY VIA HONDA IN)
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2008, 2009, 2010, 2011, 2012
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 78100-30A-A01 (VERIFY VIA HONDA IN)
- Notes
- HDS programming + VIN registration. 11th Gen unit.
Reference information for 2008-2012. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.
Vehicle overview
- Vehicle
- Honda Accord
- Model years
- 2008-2012
- Generation
- 8th Gen CU
Tools we use for this vehicle
Factory scan, coding, and calibration access
Honda HDS / i-HDS / Honda Diagnostic Software
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Tool requirements
Basic OBD2 scanner
View capabilities and limitations
Supported work
- Read codes on SRS systems (13 documented rows)
- Read codes on ECU systems (8 documented rows)
- Read codes on BCM systems (1 documented row)
- Read codes on TCU / TCM systems (3 documented rows)
- Read codes on ABS systems (3 documented rows)
- Read codes on IPC / SAS systems (5 documented rows)
- Read codes on Keys systems (2 documented rows)
- Read codes on Immobilizer systems (1 documented row)
- Read codes on Accessory systems (2 documented rows)
Limitations
- Keys programming, coding, cloning, or security work (1 documented row)
- Immobilizer programming, coding, cloning, or security work (1 documented row)
Factory programming software (J2534)
View capabilities and limitations
Supported work
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Bench programmer
View capabilities and limitations
Supported work
- Keys bench clone rows (1 documented row)
Dealer or specialist
View capabilities and limitations
Supported work
- Immobilizer dealer security rows (1 documented row)
Dealer security and specialist module work should be scoped by VIN before you buy parts or pay for programming.
Get a QuoteKnow this platform
This platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
Generation service summary for Honda Accord 8th Gen CU (2008-2012)
Generation coverage
This page consolidates Honda Accord service data for 2008-2012 across 5 model years; service information is available for 5 years.
Choose a yearProgrammable modules
The merged generation page indexes 35 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, module programming, and SRS reset for the Honda Accord 2008-2012 span, with exact-year validation before service. Mail-in module service is available nationwide.
Get a quoteYear-by-year details
| Year | VIN split | Trim notes |
|---|---|---|
| 2008 | ||
| 2009 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2010 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2011 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2012 | VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code. | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
ECU and TCU access paths by engine
Available access data covers 3 ECU or TCU families across 12 engine rows. Final service is still confirmed by VIN, module label, and installed software.
Shown access methods: OBD, BENCH, BOOT.
EDC16C7
Bosch - ECU / PCM
View 3 engine records
EDC16C7
Bosch - ECU / PCM
-
2008-20122.2L i-CTDi (N22A2) - 140 PS - Diesel -
2008-20122.2L i-CTDi (N22A2) - 140 PS - Diesel -
2008-20122.2L i-CTDi (N22A2) - 140 PS - Diesel
EDC17CP06
Bosch - ECU / PCM
View 3 engine records
EDC17CP06
Bosch - ECU / PCM
-
2008-20122.2L i-CTDi (N22A2) - 150 PS - Diesel -
2010-20122.2L i-CTDi (N22A2) - 150 PS - Diesel -
2010-20122.2L i-CTDi (N22A2) - 150 PS - Diesel
EDC17CP16
Bosch - ECU / PCM
View 6 engine records
EDC17CP16
Bosch - ECU / PCM
-
2008-20122.2L i-CTDi (N22A2) - 150 PS - Diesel -
2008-20122.2L i-DTEC (N22A2) - 180 PS - Diesel -
2010-20122.2L i-CTDi (N22A2) - 150 PS - Diesel -
2010-20122.2L i-CTDi (N22A2) - 150 PS - Diesel -
2010-20122.2L i-DTEC (N22A2) - 180 PS - Diesel -
2010-20122.2L i-DTEC (N22A2) - 180 PS - Diesel
3 gateway, immobilizer, and security items documented across the 2008-2012 generation.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Honda ACE Unibody - Advanced High-Strength Steel (11th Gen)
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Honda Display Audio (7" or 8" touchscreen); HondaLink; Bluetooth; USB/Aux
- OTA Capable
- No
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Available
Reviewed coverage: 2008-2012 - 2.0L (R20Z2), 2.0i VTEC (R20A), 2.2 i-DTEC, 2.2L i-CTDi (N22A2), 2.2L i-DTEC (N22A2), 2.4 i-VTEC (K24Z), 2.4L (K24Z2), 2.4L i-VTEC (K24V3), 3.5 V6 (J35Z), 3.5L V6 (J35Y1).
Confirm the exact engine, ECU, and any prerequisite access method before service.
Confirmation is limited to reviewed year/engine rows; other variants require confirmation.
WHAT WE RESOLVE
8th Gen CU (2008-2012) common module and security issues
- SRS crash-data and warning light SRS service can involve SRS Control Unit (2008-2010), SRS Control Unit (2010), and SRS Control Unit (2011-2012). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Honda Accord (2008-2012) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Honda Accord (2008-2012). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Honda Accord (2008-2012)?
The Honda Accord (2008-2012) generation currently shows 28 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include SRS Control Unit (2008-2010), SRS Control Unit (2010), and SRS Control Unit (2011-2012). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 77960-TE0-A012-M1 (2008-2010) - confirm for your exact year/VIN.
Can you reset the airbag module on Honda Accord (2008-2012)?
Yes. The generation data includes 13 SRS records, including SRS Control Unit (2008-2010), SRS Control Unit (2010), and SRS Control Unit (2011-2012). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 77960-TE0-A012-M1 (2008-2010) - confirm for your exact year/VIN.
Do all Honda Accord (2008-2012) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2008-2012; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
How long does service take for Honda Accord (2008-2012)?
Most programming, cloning, and SRS jobs are quoted after VIN, DTC, part number, and repair-scope review. Service time varies by module type, condition, security access, and the active mobile service path. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Is Honda Accord (2008-2012) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.
More Accord generations
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
i-HDS Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.