No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.
2006 Ford Mustang Supported Services
2006 Ford Mustang
ADAS calibration, module programming, and security relearns
Full ADAS calibration, module programming, and key security work for the 2006 Ford Mustang. Mobile service is available in the Dallas/Fort Worth service area; mail-in is temporarily unavailable.
Technical snapshot
PlatformS197 (5th Gen, 2005-2009)
CAN ArchitectureHS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
SecurityFord PATS Gen 4-5 (Texas Instruments DST-80 80-bit transponder); SecuriLock passive anti-theft; no OBD PIN extraction; AKL requires FDRS PIN or dealer authorization
Expert ADAS calibration, module programming, and diagnostic recovery for the 2006 Ford Mustang. On this vehicle we cover documented systems include Rear View Camera, this S197 (5th Gen, 2005-2009) platform vehicle, PATS / Smart Key immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2006 Ford Mustang using the documented module data on this page.
No full ADAS suite - pre-Co-Pilot360 generation. Optional rear camera; Blind Spot Information System optional on upper trims; no standard Automatic Emergency Braking.
Infotainment context
Ford AM/FM stereo; CD player; Bluetooth (if equipped); Aux input
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: S197 (5th Gen, 2005-2009)
Confirmed
Verify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Ford Mustang issues we resolve on this platform: Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - S197 (5th Gen, 2005-2009) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - PATS / Smart Key immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No full ADAS suite - pre-Co-Pilot360 generation. Optional rear camera; Blind Spot Information System optional on upper trims; no standard Automatic Emergency Braking.
IDS as-built data download + PATS parameter reset required.
ABS Module Replacement
IDS ABS bleed procedure + WSS relearn.
SRS MODULES
SRS Modules
Airbag Control Module (ACM)x1
PART
6R3314B321CA
PROTOCOL
Bench
CLONE
true
NOTES
After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Modulex1
PART
6R3314B321DB
PROTOCOL
None
CLONE
false
NOTES
Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged.
Passenger Airbag Modulex1
PART
6R3314B321EB
PROTOCOL
None
CLONE
false
NOTES
Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access.
SDM / SRS Modulex3
6R3314B321CAUnder center console, floor tunnel
PART
6R3314B321CA
LOCATION
Under center console, floor tunnel
CHIP/MCU
93C76
NOTES
OEM part 6R3314B321CA. Also fits: 6R3314B321BB,6R3314B321BA. Memory chip: 93C76. Crash data clear supported.
6R3314B321DBUnder center console, floor tunnel
PART
6R3314B321DB
LOCATION
Under center console, floor tunnel
CHIP/MCU
93C76
NOTES
OEM part 6R3314B321DB. Also fits: 6R3314B321DA. Memory chip: 93C76. Crash data clear supported.
6R3314B321EBUnder center console, floor tunnel
PART
6R3314B321EB
LOCATION
Under center console, floor tunnel
CHIP/MCU
93C76
NOTES
OEM part 6R3314B321EB. Also fits: 6R3314B321EA. Memory chip: 93C76. Crash data clear supported.
SRS Control Unit (variant)x4
6R3314B321BB
PART
6R3314B321BB
CHIP/MCU
93C76
6R3314B321BA
PART
6R3314B321BA
CHIP/MCU
93C76
6R3314B321DA
PART
6R3314B321DA
CHIP/MCU
93C76
6R3314B321EA
PART
6R3314B321EA
CHIP/MCU
93C76
ECU MODULES
ECU Modules
Powertrain Control Module (PCM) - 4.0L Cologne SOHC V66R3A-12A650-RA
PART
6R3A-12A650-RA
PROTOCOL
J2534
CODING
Yes
CLONE
No
Powertrain Control Module (PCM) - 4.6L 3V SOHC Modular V86R3A-12A650-FB
PART
6R3A-12A650-FB
PROTOCOL
J2534
CODING
Yes
CLONE
No
BCM MODULES
BCM Modules
BCM (Body Control Module)
NOTES
Ford BCM. IDS/FDRS programming after replacement. PATS relearn required if equipped.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 4R70W 4-Speed Auto5R3P-7Z369
PART
5R3P-7Z369
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Ford EEC-V
NOTES
Requires Ford IDS/FDRS programming, adaptive relearn drive cycle, Mercon V ATF, VIN matching required
TCU - 5R55S 5-Speed Auto6R3P-7Z369
PART
6R3P-7Z369
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Ford EEC-V
NOTES
Requires Ford IDS programming, transmission relearn procedure, Mercon V ATF, strategy calibration needed
N/A - T-45 5-Speed Manual
PROTOCOL
Virgin Flash
CODING
No
CLONE
No
CHIP/MCU
N/A
NOTES
Manual transmission - no TCU present
N/A - T-3650 5-Speed Manual
PROTOCOL
Virgin Flash
CODING
No
CLONE
No
CHIP/MCU
N/A
NOTES
Manual transmission - no TCU present
N/A - T-45 5-Speed Manual
PROTOCOL
Virgin
CODING
No
CLONE
No
CHIP/MCU
N/A
NOTES
Manual transmission - no TCU present
N/A - T-3650 5-Speed Manual
PROTOCOL
Virgin
CODING
No
CLONE
No
CHIP/MCU
N/A
NOTES
Manual transmission - no TCU present
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/ESC Control Module (ABSCM)
NOTES
Ford ABS module. IDS bleeding procedure after replacement. Wheel speed sensor relearn.
Wheel Speed Sensor - Front (each)
NOTES
Hall-effect sensor. Replace if DTC C1145/C1155 set.
Wheel Speed Sensor - Rear (each)
NOTES
Hall-effect sensor.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Steering Angle Sensor (SAS)
CODING
Yes
NOTES
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
CODING
Yes
NOTES
cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
SYNC 4A APIM (S650 - New Infotainment)OASIS - S650 SYNC 4A-SPECIFIC PN (DO NOT USE ANY S550 SYNC 3, 4 APIM PN)
PART
OASIS - S650 SYNC 4A-SPECIFIC PN (DO NOT USE ANY S550 SYNC 3, 4 APIM PN)
NOTES
S650 SYNC 4A - new hardware, different from S550 SYNC 3 or SYNC 4. FDRS APIM programming + VIN registration after replacement. OTA capable - verify via FDRS if software update available.
S650 new digital cluster. FDRS IPC programming + new generation PATS relearn. Odometer data transfer per state regulations. Verify all gauge and ADAS alert functions.
Electronic Parking Brake (S650 - if equipped)OASIS - S650-SPECIFIC PN
PART
OASIS - S650-SPECIFIC PN
NOTES
FDRS EPB retract before rear brake service. Reapply via FDRS after. Verify EPB function and lamp.
MagneRide / Suspension Control Module (S650 - if equipped)OASIS - S650-SPECIFIC PN
PART
OASIS - S650-SPECIFIC PN
NOTES
S650 suspension control module - new platform. FDRS programming + adaptation reset. Verify all drive mode switching post-programming.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
SystemPATS / Smart Key
Add KeyYes
All Keys LostYes
Ford PATS Gen 4-5 (Texas Instruments DST-80 80-bit transponder); SecuriLock passive anti-theft; no OBD PIN extraction; AKL requires FDRS PIN or dealer authorization
IMMOBILIZER MODULES
Immobilizer Modules
PATS (Passive Anti-Theft System)
NOTES
Ford PATS Gen 4-5. PCM-integrated. IDS parameter reset for AKL. No OBD PIN extraction.
KEY & FOB TYPES
Key & Fob Types
PATS Transponder Key (80-bit TI chip)
NOTES
Cut and program. IDS PATS relearn or aftermarket tool (Autel MaxiIM). Max 8 keys.
Remote Key Fob (RKE)
NOTES
315MHz Ford RKE. Program via IDS or 8x on/off cycle for simple fobs.
Replacement Notes
PATS / Smart Key system. FDRS required for key programming and module replacement. No obd pin extraction; akl supported.
Ford AM/FM stereo; CD player; Bluetooth (if equipped); Aux input
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2006 Ford Mustang?
ADAS calibration pricing for a 2006 Ford Mustang depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2006 Ford Mustang?
Yes. The 2006 Ford Mustang uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 6R3314B321CA. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2006 Ford Mustang?
After windshield replacement on a 2006 Ford Mustang, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2006 Ford Mustang module service take?
Most 2006 Ford Mustang onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 17 programmable modules documented in our database (2 ECU, 1 BCM, 4 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2006 Ford Mustang on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2006 Ford Mustang. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2006 Ford Mustang programming?
Every programming, cloning, and calibration job on the 2006 Ford Mustang is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2006 Ford Mustang with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2006 Ford Mustang. Immobilizer generation on this platform: PATS / Smart Key. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2006 Ford Mustang can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2006 Ford Mustang. For this vehicle our database documents:
2 engine control (ECU/PCM)
4 transmission control (TCU/TCM)
1 body control (BCM and related)
3 ABS / brake control (EBCM)
1 immobilizer / security
2 key & fob
2 steering angle sensor (SAS)
1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2006 Ford Mustang covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.