Driver Confidence I (Forward Collision Alert, Lane Keeping Assist, Side Blind Zo
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065Covers model years 2018-2026 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Buick Enclave built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
The ADAS, module, and security rows below are consolidated across the full 2018-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2018-2026”.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Buick Enclave. On this vehicle we cover documented systems include Forward Collision Alert / Automatic Emergency Braking, Lane Keep Assist / Lane Departure Warning (LKA/LDW), and Side Blind Zone Alert with Lane Change Alert, this C1 platform vehicle, PassKey III+ immobilizer support, Buick IntelliLink infotainment programming. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
GM GDS2 / GM Tech2Win / GM MDI 2
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
This platform uses GMLAN HS-CAN 500kbps, MS-GMLAN 33.3kbps, LIN bus, MOST (Bose audio Avenir) with ISO 15765-4 CAN.
This page consolidates Buick Enclave service data for 2018-2026 across 9 model years; 9 years have merged CCT data.
Choose a yearMerged ADAS coverage includes 12 system records, including Forward Collision Alert / Automatic Emergency Braking (2018), Lane Keep Assist / Lane Departure Warning (LKA/LDW) (2018), Side Blind Zone Alert with Lane Change Alert (2018), and Rear Cross Traffic Alert (RCTA) (2018). Year-marked systems apply only to the shown range.
View ADAS dataThis generation has 27 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersThe merged generation page indexes 52 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway, immobilizer, and key-security coverage includes 11 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Buick Enclave 2018-2026 span, with exact-year validation before service.
Get a quoterequired
Static FEC calibration via GDS2 SPS2. OEM glass recommended. DTC B127E if skipped. HUD aim calibration also required if equipped. C1 platform windshield large - precise reinstallation critical.
required
Static FEC calibration via GDS2 SPS2. OEM glass recommended. DTC B127E if skipped. HUD aim calibration also required if equipped. C1 platform windshield large - precise reinstallation critical.
required
Static FEC calibration via GDS2 SPS2. OEM glass recommended. DTC B127E if skipped. HUD aim calibration also required if equipped. C1 platform windshield large - precise reinstallation critical.
required
Static FEC calibration via GDS2 SPS2. OEM glass recommended. DTC B127E if skipped. HUD aim calibration also required if equipped. C1 platform windshield large - precise reinstallation critical.
required
Static FEC calibration via GDS2 SPS2. OEM glass recommended. DTC B127E if skipped. HUD aim calibration also required if equipped. C1 platform windshield large - precise reinstallation critical.
required
Static FEC calibration via GDS2 SPS2. OEM glass recommended. DTC B127E if skipped. HUD aim calibration also required if equipped. C1 platform windshield large - precise reinstallation critical.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended.
required
Static FEC calibration GDS2. OEM glass recommended.
required
Static FEC calibration GDS2. OEM glass recommended.
required
Static FEC calibration GDS2. OEM glass recommended.
required
Static FEC calibration GDS2. OEM glass recommended.
required
Static FEC calibration GDS2. OEM glass recommended.
required
Static FEC calibration GDS2. OEM glass recommended.
required
Static FEC calibration GDS2. Standard all trims 2023 - always required. OEM glass recommended.
required
Static FEC calibration GDS2. Standard all trims 2023 - always required. OEM glass recommended.
required
Static FEC calibration GDS2. Standard all trims 2023 - always required. OEM glass recommended.
required
Static FEC calibration GDS2. Standard all trims 2023 - always required. OEM glass recommended.
required
Static FEC calibration GDS2. Standard all trims 2023 - always required. OEM glass recommended.
required
Static FEC calibration GDS2. Standard all trims 2023 - always required. OEM glass recommended.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended. Standard all trims - always required.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended. Standard all trims - always required.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended. Standard all trims - always required.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended. Standard all trims - always required.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended. Standard all trims - always required.
required
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended. Standard all trims - always required.
required
Radar static aim calibration via GDS2. Inspect bracket. C1 Enclave front bumper larger service area than compact CUVs.
required
Radar static aim calibration via GDS2. Inspect bracket. C1 Enclave front bumper larger service area than compact CUVs.
required
Radar static aim calibration via GDS2. Inspect bracket. C1 Enclave front bumper larger service area than compact CUVs.
required
Radar static aim GDS2.
required
Radar static aim GDS2.
required
Radar static aim GDS2.
required
Radar static aim GDS2. C1 platform larger bumper service area.
required
Radar static aim GDS2. C1 platform larger bumper service area.
required
Radar static aim GDS2. C1 platform larger bumper service area.
required
SPS2 PMI if sensors replaced. Drive-off self-cal. Rear camera static calibration if disturbed.
required
SPS2 PMI if sensors replaced. Drive-off self-cal. Rear camera static calibration if disturbed.
required
SPS2 PMI if sensors replaced. Drive-off self-cal. Rear camera static calibration if disturbed.
required
SPS2 PMI if sensors replaced. Drive-off self-cal. Rear camera static calibration if disturbed.
required
PMI if sensors replaced. Drive-off self-cal.
required
PMI if sensors replaced. Drive-off self-cal.
required
PMI if sensors replaced.
required
PMI if sensors replaced.
required
Surround view calibration if mirror camera replaced. Calibration mat EN-49982.
required
Surround view calibration if camera replaced. Mat EN-49982.
required
Surround view calibration if camera replaced.
required
Full scan. SDM crash clear or replace. C1 Enclave has 3-row side impact sensors - verify ALL seat sensor circuits before clearing SDM. DTC B0081/B0086 if any sensor disconnected.
required
Full scan. SDM crash clear or replace. C1 Enclave has 3-row side impact sensors - verify ALL seat sensor circuits before clearing SDM. DTC B0081/B0086 if any sensor disconnected.
required
Full scan. SDM crash clear or replace. C1 Enclave has 3-row side impact sensors - verify ALL seat sensor circuits before clearing SDM. DTC B0081/B0086 if any sensor disconnected.
required
Full scan. SDM crash clear or replace. C1 Enclave has 3-row side impact sensors - verify ALL seat sensor circuits before clearing SDM. DTC B0081/B0086 if any sensor disconnected.
required
Full scan. SDM crash clear. Verify all 3-row seat impact sensor circuits.
required
Full scan. SDM crash clear. Verify all 3-row seat impact sensor circuits.
required
Full scan. SDM crash clear. Verify all 3-row seat impact sensor circuits.
required
Full scan. SDM crash clear. Verify all 3-row seat impact sensors.
required
Full scan. SDM crash clear. Verify all 3-row seat impact sensors.
required
Full scan. SDM crash clear. Verify all 3-row seat impact sensors.
required
Full scan. SDM crash clear. Verify 3-row seat sensors.
required
Full scan. SDM crash clear. Verify 3-row seat sensors.
required
Full scan. SDM crash clear. Verify 3-row seat sensors.
required
Full scan. SDM crash clear. Verify all 3-row seat sensors.
required
Full scan. SDM crash clear. Verify all 3-row seat sensors.
required
Full scan. SDM crash clear. Verify all 3-row seat sensors.
required
Full scan. SDM crash clear. Verify ALL 3-row seat impact sensor circuits before clearing codes.
required
Full scan. SDM crash clear. Verify ALL 3-row seat impact sensor circuits before clearing codes.
required
Full scan. SDM crash clear. Verify ALL 3-row seat impact sensor circuits before clearing codes.
required
SPS2 PMI mandatory. Avenir/Premium Driver Confidence RPO must be preserved. BCM replacement on Avenir requires full RPO list restoration.
required
SPS2 PMI mandatory. Preserve Driver Confidence and Avenir RPO.
required
SPS2 PMI mandatory. Wireless CarPlay RPO in BCM Avenir 2020.
required
SPS2 PMI mandatory. Infotainment 3 Plus standard Avenir - preserve RPO.
required
SPS2 PMI mandatory. Google built-in RPO in BCM 2023. Preserve full RPO.
required
SPS2 PMI mandatory. 2024 Avenir update - preserve full RPO list. Google built-in RPO in BCM.
Yes
Front surround view camera recalibration required after front bumper R&R. Use GDS2/MDI2.
| Year | VIN split | Infotainment | Wireless CarPlay | Wireless Android Auto | Trim notes |
|---|---|---|---|---|---|
| 2018 | VIN pos 4-8 identifies series/body/engine. GM WMI: 5GA (Buick). Position 8 = engine code. Position 10 = model year code. | Buick IntelliLink | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2019 | VIN pos 4-8 identifies series/body/engine. GM WMI: 5GA (Buick). Position 8 = engine code. Position 10 = model year code. | Buick IntelliLink | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2020 | VIN pos 4-8 identifies series/body/engine. GM WMI: 5GA (Buick). Position 8 = engine code. Position 10 = model year code. | Buick Infotainment 3 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2021 | VIN pos 4-8 identifies series/body/engine. GM WMI: 5GA (Buick). Position 8 = engine code. Position 10 = model year code. | Buick Infotainment 3 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2022 | VIN pos 4-8 identifies series/body/engine. GM WMI: 5GA (Buick). Position 8 = engine code. Position 10 = model year code. | Buick Infotainment 3 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. | ||
| 2023 | VIN pos 4-8 identifies series/body/engine. GM WMI: 5GA (Buick). Position 8 = engine code. Position 10 = model year code. | Buick Infotainment 3 Premium | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2024 | VIN pos 4-8 identifies series/body/engine. GM WMI: 5GA (Buick). Position 8 = engine code. Position 10 = model year code. | Buick Infotainment 3 Premium | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2025 | VIN pos 4-8 identifies series/body/engine. GM WMI: 5GA (Buick). Position 8 = engine code. Position 10 = model year code. | Buick Infotainment 3 Premium | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
| 2026 | VIN pos 4-8 identifies series/body/engine. GM WMI: 5GA (Buick). Position 8 = engine code. Position 10 = model year code. | Buick Infotainment 3 Premium | 1 | 1 | Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements. |
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
12 ADAS systems documented across 2018-2026. Rows that apply to only part of the generation carry a year badge.
Driver Confidence I (Forward Collision Alert, Lane Keeping Assist, Side Blind Zone Alert, Rear Cross-Traffic Alert) / Driver Confidence II (+ Surround Vision, Park Assist) - Avenir standard
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Collision Alert / Automatic Emergency Braking 2018 | Front Camera + Radar | Fused | Static | YES | 84480500 | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) 2018 | Forward Camera | Camera | Static | YES | 84480500 | |
| Side Blind Zone Alert with Lane Change Alert 2018 | Side Radar | Radar | None | YES | 84480510 | |
| Rear Cross Traffic Alert (RCTA) 2018 | Side Radar | Radar | None | YES | 84480510 | |
| Surround Vision Camera 2018 | Multi-Camera | Camera | Static | YES | 84480520 | |
| Forward Collision Alert / Automatic Emergency Braking 2019 | Front Camera + Radar | Fused | Static | YES | 84480500 | |
| Lane Keep Assist / Lane Departure Warning (LKA/LDW) 2019-2026 | Forward Camera | Camera | Static | YES | 84480500 | |
| Side Blind Zone Alert / Rear Cross Traffic Alert 2019 | Side Radar | Radar | None | YES | 84480510 | |
| Forward Collision Alert / Automatic Emergency Braking 2020 | Front Camera + Radar | Fused | Static | YES | 84480500 | |
| Side Blind Zone Alert / Rear Cross Traffic Alert 2020-2026 | Side Radar | Radar | None | YES | 84480510 | |
| Forward Collision Alert / Automatic Emergency Braking 2021-2026 | Front Camera + Radar | Fused | Static | YES | 84480500 | |
| Surround Vision Camera 2022-2026 | Multi-Camera | Camera | Static | YES | 84480520 |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationStatic FEC calibration via GDS2 SPS2. OEM glass recommended. DTC B127E if skipped. HUD aim calibration also required if equipped. C1 platform windshield large - precise reinstallation critical.
Radar static aim calibration via GDS2. Inspect bracket. C1 Enclave front bumper larger service area than compact CUVs.
SPS2 PMI if sensors replaced. Drive-off self-cal. Rear camera static calibration if disturbed.
Surround view calibration if mirror camera replaced. Calibration mat EN-49982.
Full scan. SDM crash clear or replace. C1 Enclave has 3-row side impact sensors - verify ALL seat sensor circuits before clearing SDM. DTC B0081/B0086 if any sensor disconnected.
SPS2 PMI mandatory. Avenir/Premium Driver Confidence RPO must be preserved. BCM replacement on Avenir requires full RPO list restoration.
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended.
Radar static aim GDS2.
PMI if sensors replaced. Drive-off self-cal.
Full scan. SDM crash clear. Verify all 3-row seat impact sensor circuits.
SPS2 PMI mandatory. Preserve Driver Confidence and Avenir RPO.
PMI if sensors replaced.
Full scan. SDM crash clear. Verify all 3-row seat impact sensors.
SPS2 PMI mandatory. Wireless CarPlay RPO in BCM Avenir 2020.
Static FEC calibration GDS2. OEM glass recommended.
Full scan. SDM crash clear. Verify 3-row seat sensors.
Surround view calibration if camera replaced. Mat EN-49982.
SPS2 PMI mandatory. Infotainment 3 Plus standard Avenir - preserve RPO.
Front surround view camera recalibration required after front bumper R&R. Use GDS2/MDI2.
Static FEC calibration GDS2. Standard all trims 2023 - always required. OEM glass recommended.
Surround view calibration if camera replaced.
Full scan. SDM crash clear. Verify all 3-row seat sensors.
SPS2 PMI mandatory. Google built-in RPO in BCM 2023. Preserve full RPO.
Static FEC calibration GDS2. HUD aim if equipped. OEM glass recommended. Standard all trims - always required.
Radar static aim GDS2. C1 platform larger bumper service area.
Full scan. SDM crash clear. Verify ALL 3-row seat impact sensor circuits before clearing codes.
SPS2 PMI mandatory. 2024 Avenir update - preserve full RPO list. Google built-in RPO in BCM.
52 documented Buick Enclave modules across 2018-2026. Open a group for part numbers, programming protocol, security notes, and clone support.
_years covers only 2018-2021 for this generation
Compatible donor years: 2018, 2019, 2020, 2021
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family 12695200 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019-2020, 2023-2026 for this generation
Compatible donor years: 2019, 2020, 2023, 2024, 2025, 2026
Donor must match part family 12695200 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Donor must match part family 12695200 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Donor must match part family 12695200 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family 24295650 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019-2021 for this generation
Compatible donor years: 2019, 2020, 2021
Donor must match part family 24295650 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2022-2026 for this generation
Compatible donor years: 2022, 2023, 2024, 2025, 2026
Donor must match part family 24295650 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family 84480540 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Donor must match part family 84480540 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Donor must match part family 84480540 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Donor must match part family 84480540 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Donor must match part family 84480540 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2023 for this generation
Compatible donor years: 2023
Donor must match part family 84480540 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Donor must match part family 84480540 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Donor must match part family 24282 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2022-2023 for this generation
Compatible donor years: 2022, 2023
Donor must match part family 24267748 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2024-2025 for this generation
Compatible donor years: 2024, 2025
Donor must match part family 24282 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2026 for this generation
Compatible donor years: 2026
Donor must match part family 24292 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Donor must match part family 84480550 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2019-2026 for this generation
Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Donor must match part family 84480550 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Donor must match part family 84459120 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Donor must match part family 84459121 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2020-2021 for this generation
Compatible donor years: 2020, 2021
Donor must match part family 85521137 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2022-2024 for this generation
Compatible donor years: 2022, 2023, 2024
Donor must match part family 85593544 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2025-2026 for this generation
Compatible donor years: 2025, 2026
Donor must match part family 84X - requires cloning
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2018-2019 for this generation
Compatible donor years: 2018, 2019
Always match the full part number before buying a used module.
_years covers only 2020-2026 for this generation
Compatible donor years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2019 for this generation
Compatible donor years: 2019
Always match the full part number before buying a used module.
_years covers only 2019-2026 for this generation
Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2020 for this generation
Compatible donor years: 2020
Always match the full part number before buying a used module.
_years covers only 2021 for this generation
Compatible donor years: 2021
Always match the full part number before buying a used module.
_years covers only 2022 for this generation
Compatible donor years: 2022
Always match the full part number before buying a used module.
_years covers only 2023 for this generation
Compatible donor years: 2023
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
11 gateway, immobilizer, and security items documented across 2018-2026.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
PassKey III+ (PKES) - SPS2 GDS2 required
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2019-2023 for this generation
Compatible donor years: 2019, 2020, 2021, 2022, 2023
Always match the full part number before buying a used module.
_years covers only 2024-2026 for this generation
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2019-2026 for this generation
Compatible donor years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Always match the full part number before buying a used module.
PassKey III+ system. SPS/ACDelco TDS required for key programming and module replacement. Pin code extractable via obd; akl supported.
Yes. Core Auto Logic supports generation-scoped module programming for the Buick Enclave (2018-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
The Buick Enclave (2018-2026) generation currently shows 27 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Sensing & Diagnostic Module (SDM) (2018-2021) and Sensing & Diagnostic Module (SDM). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 84347913 (2018-2021) - confirm for your exact year/VIN.
The merged generation data documents 12 ADAS systems, including Forward Collision Alert / Automatic Emergency Braking (2018), Lane Keep Assist / Lane Departure Warning (LKA/LDW) (2018), Side Blind Zone Alert with Lane Change Alert (2018), Rear Cross Traffic Alert (RCTA) (2018), and Surround Vision Camera (2018). Calibration triggers include Windshield Replacement (2018), Front Bumper Repair (2018), Rear Bumper Repair (2018), and Mirror Replacement (2018). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Yes. The generation data includes 6 SRS records, including Sensing & Diagnostic Module (SDM) (2018-2021) and Sensing & Diagnostic Module (SDM). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 84347913 (2018-2021) - confirm for your exact year/VIN.
No assumption should be made across the full span. The generation page merges rows across 2018-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Yes, where the VIN and security workflow support it. The generation data includes 11 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.