VIN / Build Split
VIN pos 4-7 identifies model/body/engine/steering. Position 4-5 = model series (e.g., VA = 3 Series). Position 7 = engine. BMW WMI: WBA, WBS, 5UX. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2019 BMW X5 Supported Services
2019 BMW X5
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform CLAR (G05)
- CAN Architecture FlexRay, MOST, K-CAN, K-CAN2, K-CAN3, PT-CAN, PT-CAN2, Ethernet (EtherBoot on BDC builds)
- Security BMW ISN (Individual Serial Number) - FEM/BDC CAS4+; ISTA + dealer auth required for AKL
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 BMW X5. On this vehicle we cover documented systems include Driving Assistance Pro - Forward Camera (KAFAS 3), Forward Radar (77GHz), and Blind Spot Detection (BSD) - Side Radar, this CLAR (G05) platform vehicle, CAS/FEM/BDC immobilizer support, BMW iDrive 7 infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
CLAR (G05)
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
FlexRay, MOST, K-CAN, K-CAN2, K-CAN3, PT-CAN, PT-CAN2, Ethernet (EtherBoot on BDC builds)
YEAR-SPECIFIC NOTES
Infotainment
BMW iDrive 7
Wireless Support
CarPlay: Yes
Exact-year service summary for 2019 BMW X5
ADAS coverage
This 2019 BMW X5 page documents 5 ADAS systems, including Driving Assistance Pro - Forward Camera (KAFAS 3), Forward Radar (77GHz), Blind Spot Detection (BSD) - Side Radar, and Surround View Cameras (4-Camera System).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Mirror Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 25 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 23 gateway, immobilizer, or key-security records for this 2019 BMW X5.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 BMW X5 using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
BMW Driving Assistance Pro (standard xDrive40i+) / optional HD Map Highway Assis - Standard; Platform: CLAR (G05) - Confirmed
Driver-assist suite
BMW Driving Assistance Pro (standard xDrive40i+) / optional HD Map Highway Assistant
VIN and build split
VIN pos 4-7 identifies model/body/engine/steering. Position 4-5 = model series (e.g., VA = 3 Series). Position 7 = engine. BMW WMI: WBA, WBS, 5UX. Position 10 = model year code.
Infotainment context
BMW iDrive 7; BMW Live Cockpit Professional / iDrive 7
Connectivity notes
Wireless CarPlay: Yes
Network and access
CAN: FlexRay, MOST, K-CAN, K-CAN2, K-CAN3, PT-CAN, PT-CAN2, Ethernet (EtherBoot on BDC builds)
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
BMW ISTA-D / BMW ISTA-P
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2019 BMW X5. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabGateway / Security Access
21 modules documented
Secure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
9 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
3 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
11 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
BMW Driving Assistance Pro (standard xDrive40i+) / optional HD Map Highway Assis
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: CLAR (G05)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common BMW X5 issues we resolve on this platform: Driving Assistance Pro - Forward Camera (KAFAS 3), Forward Radar (77GHz), Blind Spot Detection (BSD) - Side Radar, and Surround View Cameras (4-Camera System) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - CLAR (G05) platform uses FlexRay, MOST, K-CAN, K-CAN2, K-CAN3, PT-CAN, PT-CAN2, Ethernet (EtherBoot on BDC builds).
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
BMW Driving Assistance Pro (standard xDrive40i+) / optional HD Map Highway Assistant
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Driving Assistance Pro - Forward Camera (KAFAS 3) | Forward Camera | Camera | Static | YES | 66536-9476982 | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | 66316-9254921 | |
| Blind Spot Detection (BSD) - Side Radar | Side Radar | Radar | Static + Dynamic | YES | - | |
| Surround View Cameras (4-Camera System) | Rear Camera | Camera | Static | YES | - | |
| Hands-Free HD Maps (Highway Assistant) | Forward Camera | Camera | Static + Dynamic | YES | 66536-9476982 |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: KAFAS 3 Camera (G05-specific 66536-9476982), Lane Departure Warning, Frontal Collision Warning, ACC, Highway Assistant (if equipped)
G05-specific KAFAS 3 requires static target calibration then dynamic road drive via ISTA. Not interchangeable with G20 or G30 camera. OEM-approved windshield glass only. Confirm HD Map feature functionality post-calibration if equipped.
Front Bumper Repair or Replacement Affected: Front Radar (G05-specific 66316-9254921), Adaptive Cruise Control, Pre-Collision
ISTA static radar alignment required. G05 radar part 66316-9254921 differs from G20 and G30. Vehicle at curb weight on level surface. Inspect mounting bracket for deformation.
Rear Bumper Repair or Replacement Affected: BSD Side Radar (L/R), Blind Spot Detection, Rear Park Aid
BSD rear corner radars require ISTA coding verification after rear bumper work. Static calibration required if module removed or replaced. Rear park aid sensors require static calibration if bumper cover removed.
Mirror Replacement Affected: Surround View Side Cameras (if equipped), BSD LED Indicators
If equipped with surround view cameras, ISTA static camera calibration required after mirror replacement. BSD mirror LED function must be verified post-reinstall. PMI required if mirror module replaced.
DME Replacement Affected: Engine Management, Immobilizer, ISN Synchronization
ISN adaptation mandatory. ISTA SDP flash required. FEM/BDC ISN must match new DME ISN - no-start condition if not adapted. BMW dealer authorization or specialist ISN tool required.
FEM or BDC Replacement Affected: Immobilizer, Central Locking, Exterior Lighting, Key Programming, Trailer Module (if equipped)
Full ISTA vehicle order coding required. ISN synchronization with DME mandatory. All keys must be re-adapted. Trailer hitch module (AHK) coding must be re-verified after BDC replacement. EtherBoot on BDC builds.
Any Collision Affected: SRS Airbag Module, KAFAS 3, Front Radar, BSD Radar, DSC, Surround Cameras (if equipped)
Full ISTA module scan mandatory post-collision. SRS replace-only after hard deployment. Check all ADAS sensor mounting integrity. Surround view cameras must be verified after any collision affecting front, rear, or sides.
Suspension or Ride Height Change Affected: Front Radar, BSD Side Radar, DSC Steering Angle Sensor, Air Suspension (if equipped)
Any suspension height change shifts radar aim angles. ISTA radar static calibration and DSC steering angle sensor recalibration required. If equipped with adaptive air suspension, verify ride height calibration via ISTA after any suspension component replacement.
Forward Camera Replacement
Camera module replacement requires full recalibration using ISTA+.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using ISTA+.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using ISTA+.
SRS Modules
Advanced Crash Safety Module (ACSM) 9 records
Under center console
- Part number
- 65779474809
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65779890595
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 34506859776
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65779314520
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 07119907517
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65776834911
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65779341546
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65776991455
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
- Part number
- 65776993862
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
ECU Modules
DME - B58B30 3.0L TT (xDrive40i) 12146-8548362
- Part number
- 12146-8548362
- Protocol / method
- ISTA SDP
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MG1CS003
- Notes
- ISTA SDP flash required. ISN adaptation mandatory - FEM/BDC ISN must match new DME. Specialist ISN tools required. EtherBoot on BDC-equipped builds.
DME - N63B44 4.4L V8 TT (M50i / xDrive50i) 12146-8490070
- Part number
- 12146-8490070
- Protocol / method
- ISTA SDP
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MG1CS003
- Notes
- V8 N63 DME - not interchangeable with B58. ISN adaptation mandatory. ISTA SDP flash.
DME - B57D30 3.0L Diesel (xDrive40d)
- Protocol / method
- ISTA SDP
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch EDC17
- Notes
- Diesel DME - not interchangeable with petrol variants. ISN adaptation mandatory. ISTA SDP flash.
DME - S63B44 4.4L V8 TT (X5 M / X5 M Competition)
- Protocol / method
- ISTA SDP
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MG1CS003
- Notes
- X5 M-specific S63 DME. ISN adaptation mandatory. ISTA SDP EtherBoot flash. BMW M division dealer authorization likely required.
BCM Modules
Body Domain Controller (BDC) 61356-9472860
- Part number
- 61356-9472860
- Security
- BMW ISN / BDC
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Verify FEM vs BDC via VIN production date in ISTA (2019 early builds may use FEM). ISTA SDP required for coding and ISM adaptation. ISN synchronization between BDC and DME mandatory. EtherBoot SDP flash. New module must be coded via ISTA with full vehicle order data.
FEM - Front Electronic Module
- Security
- BMW ISN / CAS
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Early 2019 G05 builds may use FEM. Check VIN production date in ISTA. ISTA SDP coding and ISN adaptation required.
TCU / TCM Transmission Modules
TCU - 8HP50 8-Speed Auto 8HP50
- Part number
- 8HP50
- Protocol / method
- OBD
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Requires ZF GS19 adaptation, ATF spec ZF Lifeguard 8, TCU coding with BMW ISTA/D
TCU - 8HP75 8-Speed Auto 8HP75
- Part number
- 8HP75
- Protocol / method
- OBD
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Requires ZF GS19 adaptation, ATF spec ZF Lifeguard 8, TCU coding with BMW ISTA/D
ABS / Brake Modules
DSC - Dynamic Stability Control Module 34526-792832
- Part number
- 34526-792832
- Cloning supported
- No
- Notes
- Bosch DSC unit. G05-specific part number 34526-792832 - differs from G20 and G30. ISTA coding required after replacement. Hydraulic bleed procedure required - use ISTA automated bleed cycle. Steering angle sensor recalibration required via ISTA. Verify part number via VIN EPC before ordering.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 62108052820
- Part number
- 62108052820
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- cross-year extension)
Connectivity & Accessories
Head-Up Display (HUD)
- Notes
- ISTA coding required after HUD replacement. HUD angle calibration required - ISTA guided procedure.
Digital Instrument Cluster (Live Cockpit Professional)
- Notes
- ISTA SDP coding required. VIN adaptation and vehicle order data written during coding.
Harman Kardon / Bowers and Wilkins Audio
- Notes
- ISTA coding required after amplifier replacement.
Towing Package / Trailer Hitch Module
- Notes
- Trailer hitch module (AHK) requires ISTA coding when replaced. Trailer stability control integrates with DSC - verify AHK coding after any DSC or BDC replacement.
Gateway / Security Modules
Central Gateway Module 21 records
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- R7F701057
- Notes
- Compatibility label: EVO. AMP Notes: Read/Write
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XET512
- Notes
- Compatibility label: 7 series F01. FRM-Foot Space
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E series. FRM-Foot Space Notes: Read/Write
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XDT256
- Notes
- Compatibility label: E70 AHL. FRM-Foot Space Notes: 0L15Y
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E70 VDM. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E70 XE. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E81 E82 E88 XE. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E87 BASIS. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E87 E92 E93 AHL. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E87 E92 E93 XE. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E89 E9X LED AHL. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E89 E9X LED XE. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E90 E91 LED BASIS. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XET512
- Notes
- Compatibility label: F series. FRM-Foot Space Notes: Read/Write
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XET512
- Notes
- Compatibility label: F18. FRM-Foot Space
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: MAX Brose. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: R56 HIGH EKS. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: R56 R56 HIGH EKS. FRM-Foot Space Notes: 3M25J
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- FRM-Foot Space BMW E Serices Notes: 3M25J, free code
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- CAS4/CAS4+
- Notes
- Compatibility label: CAS4/CAS4+. CAS4/CAS4+
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384(3M25J)
- Notes
- Compatibility label: BMW E Serices. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel unibody with aluminum front subframe and suspension components; optional composite panels on M variants
- OBD Protocol
- ISO 15765-4 CAN / BMW-specific UDS (ISTA required for full access)
- CAN Architecture
- FlexRay, MOST, K-CAN, K-CAN2, K-CAN3, PT-CAN, PT-CAN2, Ethernet (EtherBoot on BDC builds)
- Infotainment
- BMW Live Cockpit Professional / iDrive 7
- OTA Capable
- No
- Infotainment Name
- BMW iDrive 7
- Wireless CarPlay
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2019 - 25d, 30d, 40d, 45e, 45e (Belgian downgrade), 50d (M), M40i, M50i, XDrive50i.
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2019 BMW X5?
ADAS calibration pricing for a 2019 BMW X5 depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Driving Assistance Pro - Forward Camera (KAFAS 3), Forward Radar (77GHz), Blind Spot Detection (BSD) - Side Radar, Surround View Cameras (4-Camera System), and Hands-Free HD Maps (Highway Assistant). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2019 BMW X5?
Yes. The 2019 BMW X5 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 65779474809. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2019 BMW X5?
After windshield replacement on a 2019 BMW X5, Driving Assistance Pro - Forward Camera (KAFAS 3), Forward Radar (77GHz), and Surround View Cameras (4-Camera System) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2019 BMW X5 module service take?
Most 2019 BMW X5 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 38 programmable modules documented in our database (4 ECU, 2 BCM, 2 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2019 BMW X5 on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2019 BMW X5. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2019 BMW X5 programming?
Every programming, cloning, and calibration job on the 2019 BMW X5 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2019 BMW X5 can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2019 BMW X5. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 5 ADAS module
Infotainment on this platform: BMW iDrive 7. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2019 BMW X5 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 66312466657
- ECU / PCM Part Numbers
- 12148654143
- BCM / Body Module Part Numbers
- 61356-9472860
- TCU / TCM Part Numbers
- 8HP50, 8HP75
- SRS / Airbag Module Part Numbers
- 65779474809, 65779890595, 34506859776, 65779314520, 07119907517, 65776834911, 65779341546, 65776991455, 65776993862
- ABS / EBCM Part Numbers
- 34516882091
- Instrument Cluster (IPC) Part Numbers
- 62108052820
- Transmission Control Module (TCM) Part Numbers
- 8HP50, 8HP75
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2019 BMW X5
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
BMW ISTA Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.