Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065ADAS, Module Repair & Programming
Available in multiple trim levels and engine configurations for 2019. Confirm PR codes via ETKA or ODIS to identify installed driver-assistance packages.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2019 Audi Q3. On this vehicle we cover documented systems include Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), and Blind Spot Monitor - Left Radar (Continental SRR), this Volkswagen MQB A2 (Q3 F3 generation, compact SUV) platform vehicle, Audi KESSY PEPS; VW Group security gateway; rolling code AES-128 immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
This 2019 Audi Q3 page documents 6 ADAS systems, including Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), and Blind Spot Monitor - Right Radar (Continental SRR).
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Any Collision, and Any Module Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 15 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 5 gateway, immobilizer, or key-security records for this 2019 Audi Q3.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2019 Audi Q3 using the documented systems and module data on this page.
Choose a sectionAudi Pre Sense - Available; Immobilizer: Audi KESSY PEPS - Standard; Platform: Volkswagen MQB A2 (Q3 F3 generation, compact SUV) - Confirmed
Audi Pre Sense; Adaptive Cruise Assist; Side Assist (Blind Spot Detection); Lane Assist; Parking System Plus
Audi MMI Navigation 10.1" touchscreen; virtual cockpit; Audi Connect OTA
CAN: HS-CAN (500 kbps); VW Group MQB network; OBD2 DLC Pin 6/14
Choose a section to view data
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Verify platform code matches when cross-referencing part numbers across model years.
Common Audi Q3 issues we resolve on this platform: Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), and Blind Spot Monitor - Right Radar (Continental SRR) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Volkswagen MQB A2 (Q3 F3 generation, compact SUV) platform uses HS-CAN (500 kbps); VW Group MQB network; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - Audi KESSY PEPS; VW Group security gateway; rolling code AES-128 immobilizer; add-key procedure.
Documented for the 2nd Gen F3 - includes this 2019 model year. Open the full coverage on the generation guide.
ADAS calibration pricing for a 2019 Audi Q3 depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), Blind Spot Monitor - Right Radar (Continental SRR), and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs and we return a number within 4 hours.
Yes. The 2019 Audi Q3 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 8U0959655B. Bench-only or in-vehicle - both paths are supported. Send the part number and a description of what triggered the light, and we will provide a quote and ETA.
After windshield replacement on a 2019 Audi Q3, Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site (DFW Metroplex) with OE target fixtures or via mail-in for the front camera/radar module.
Most 2019 Audi Q3 jobs complete same-day once the vehicle or module arrives. This vehicle has roughly 16 programmable modules documented in our database (1 ECU, 2 BCM, 3 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Module-bench work (ECU clones, BCM reprograms, SRS resets) ships back inside 1-3 business days including return shipping. ADAS calibration is on-site for DFW or mail-in for the front module.
Both. We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding) and a mail-in bench for module-only jobs (ECU cloning, BCM repair, SRS reset, TCU clone). Quote the work and we will tell you which path is right for the 2019 Audi Q3.
Every programming, cloning, and calibration job on the 2019 Audi Q3 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Yes, our key programming specialists handle all-keys-lost scenarios on the 2019 Audi Q3. Immobilizer generation on this platform: Audi KESSY PEPS; VW Group security gateway; rolling code AES-128. Submit the VIN and we will confirm the procedure and quote before scheduling.
We program, clone, repair, or replace the full programmable-module stack on a 2019 Audi Q3. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Send your VIN and we'll confirm exact module support and pricing for your specific vehicle within 4 hours.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.