Choose a make, model and year, or start with a VIN.
ADAS calibration, module programming, and security relearns
Available in multiple trim levels and engine configurations for 2020. Confirm PR codes via ETKA or ODIS to identify installed driver-assistance packages.
Choose a service to start your quote.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Audi A5. On this vehicle we cover documented systems include Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), and Blind Spot Monitor - Left Radar (Continental SRR), this VW Group MLB Evo (A5 B9 platform) platform vehicle, Audi KESSY PEPS; VW Group MLB Evo security gateway; rolling code AES-128 immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
This 2020 Audi A5 page documents 6 ADAS systems, including Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), and Blind Spot Monitor - Right Radar (Continental SRR).
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Any Collision, and Any Module Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 15 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 5 gateway, immobilizer, or key-security records for this 2020 Audi A5.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2020 Audi A5 using the documented systems and module data on this page.
Choose a sectionAudi Pre Sense Front/Rear/City - Available; Platform: VW Group MLB Evo (A5 B9 platform) - Confirmed
Audi Pre Sense Front/Rear/City; Adaptive Cruise Assist; Side Assist (Blind Spot Detection); Lane Assist; Park Assist; Rear Cross Traffic Alert
Audi MMI Plus 8.3" (2017-2020); MMI Touch 10.1" + virtual cockpit (2021+); OTA
CAN: HS-CAN + CANFD; VW Group MLB Evo network; OBD2 DLC Pin 6/14
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
VW ODIS-S / ODIS-E / Audi VAS 6154
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
Documented module coverage for the 2020 Audi A5. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabSecure gateway module identification, bypass workflow and security-access planning before programming.
Open Security tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Verify platform code matches when cross-referencing part numbers across model years.
Common Audi A5 issues we resolve on this platform: Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), and Blind Spot Monitor - Right Radar (Continental SRR) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - VW Group MLB Evo (A5 B9 platform) platform uses HS-CAN + CANFD; VW Group MLB Evo network; OBD2 DLC Pin 6/14.
Audi Pre Sense Front/Rear/City; Adaptive Cruise Assist; Side Assist (Blind Spot Detection); Lane Assist; Park Assist; Rear Cross Traffic Alert
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Mobileye EyeQ4) | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Radar (Continental SRR) | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Radar (Continental SRR) | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Front & Rear | Parking Sensor | Ultrasonic | None | YES | - |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationour diagnostic software static target calibration required. B9.5 EyeQ4 procedure. Work order first, SVM after pass. OEM glass only.
ARS510 static calibration using our diagnostic software. Inspect radar bracket. Park sensor our diagnostic software adaptation if replaced.
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. ADAS recalibration. SVM on all replaced modules.
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC >80%.
BSD radar alignment required after rear bumper R&R. Use ODIS-S.
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ODIS-S if applicable.
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. B9 A5 not ported.
ADAS calibration pricing for a 2020 Audi A5 depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), Blind Spot Monitor - Right Radar (Continental SRR), and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2020 Audi A5 uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 8F0959655. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2020 Audi A5, Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
Most 2020 Audi A5 onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 17 programmable modules documented in our database (1 ECU, 2 BCM, 3 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2020 Audi A5. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2020 Audi A5 is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
We program, clone, repair, or replace the full programmable-module stack on a 2020 Audi A5. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2020 Audi A5 covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.