Audi Pre Sense Front/Rear/City
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065Covers model years 2017-2017 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Audi A5 built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
The ADAS, module, and security rows below are consolidated across the full 2017-2017 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2017-2017”.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2017 Audi A5. On this vehicle we cover documented systems include Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), and Blind Spot Monitor - Left Radar (Continental SRR), this VW Group MLB Evo (A5 B9 platform) platform vehicle, Audi KESSY PEPS; VW Group MLB Evo security gateway; rolling code AES-128 immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Verify platform code matches when cross-referencing part numbers across model years.
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
VW ODIS-S / ODIS-E / Audi VAS 6154
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
This platform uses HS-CAN + CANFD; VW Group MLB Evo network; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
This page consolidates Audi A5 service data for 2017-2017 across 1 model year; 1 year have merged CCT data.
Choose a yearMerged ADAS coverage includes 6 system records, including Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), and Blind Spot Monitor - Right Radar (Continental SRR). Year-marked systems apply only to the shown range.
View ADAS dataThis generation has 7 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersThe merged generation page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway, immobilizer, and key-security coverage includes 5 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Audi A5 2017-2017 span, with exact-year validation before service.
Get a quoterequired
our diagnostic software static target calibration required. B9.5 EyeQ4 procedure. Work order first, SVM after pass. OEM glass only.
required
our diagnostic software static target calibration required. B9.5 EyeQ4 procedure. Work order first, SVM after pass. OEM glass only.
required
our diagnostic software static target calibration required. B9.5 EyeQ4 procedure. Work order first, SVM after pass. OEM glass only.
required
our diagnostic software static target calibration required. B9.5 EyeQ4 procedure. Work order first, SVM after pass. OEM glass only.
required
our diagnostic software static target calibration required. B9.5 EyeQ4 procedure. Work order first, SVM after pass. OEM glass only.
required
ARS510 static calibration using our diagnostic software. Inspect radar bracket. Park sensor our diagnostic software adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Inspect radar bracket. Park sensor our diagnostic software adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Inspect radar bracket. Park sensor our diagnostic software adaptation if replaced.
required
ARS510 static calibration using our diagnostic software. Inspect radar bracket. Park sensor our diagnostic software adaptation if replaced.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. ADAS recalibration. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. ADAS recalibration. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. ADAS recalibration. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. ADAS recalibration. SVM on all replaced modules.
required
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. ADAS recalibration. SVM on all replaced modules.
required
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC >80%.
Yes
BSD radar alignment required after rear bumper R&R. Use ODIS-S.
Yes
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
Conditional
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ODIS-S if applicable.
| Year | Trim notes |
|---|---|
| 2017 | Available in multiple trim levels and engine configurations for 2017. Confirm PR codes via ETKA or ODIS to identify installed driver-assistance packages. |
6 ADAS systems documented across 2017-2017. Rows that apply to only part of the generation carry a year badge.
Audi Pre Sense Front/Rear/City; Adaptive Cruise Assist; Side Assist (Blind Spot Detection); Lane Assist; Park Assist; Rear Cross Traffic Alert
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Mobileye EyeQ4) | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Bosch MRR) | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Radar (Continental SRR) | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Radar (Continental SRR) | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear View Camera | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Front & Rear | Parking Sensor | Ultrasonic | None | YES | - |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationour diagnostic software static target calibration required. B9.5 EyeQ4 procedure. Work order first, SVM after pass. OEM glass only.
ARS510 static calibration using our diagnostic software. Inspect radar bracket. Park sensor our diagnostic software adaptation if replaced.
Full our diagnostic software scan. J234 likely replace-only. All airbags and pretensioners replaced. ADAS recalibration. SVM on all replaced modules.
our diagnostic software SVM required. Factory auth for J519, ECM, J518, AKL. Battery SOC >80%.
BSD radar alignment required after rear bumper R&R. Use ODIS-S.
Blind spot monitoring sensor replacement requires calibration using ODIS-S.
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ODIS-S if applicable.
16 documented Audi A5 modules across 2017-2017. Open a group for part numbers, programming protocol, security notes, and clone support.
coding and programming fields are absent or ambiguous
Compatible donor years: 2017
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2017
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2017
Always match the full part number before buying a used module.
security_type indicates immobilizer or VIN security
Compatible donor years: 2017
Donor must match part family 8W2-937-086-X; VIN-locked
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2017
Always match the full part number before buying a used module.
clone_supported indicates cloning or bench work
Compatible donor years: 2017
Donor must match part family 0B5927156 - requires cloning
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2017
Always match the full part number before buying a used module.
clone_supported indicates cloning or bench work
Compatible donor years: 2017
Donor must match part family 0B8927156 - requires cloning
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2017
Always match the full part number before buying a used module.
clone_supported indicates cloning or bench work
Compatible donor years: 2017
Donor must match part family 8W0 920 750 A - requires cloning
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2017
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2017
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2017
Always match the full part number before buying a used module.
5 gateway, immobilizer, and security items documented across 2017-2017.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2017
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2017
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2017
Always match the full part number before buying a used module.
Audi Advanced Key KESSY PEPS; rolling code; ODIS-S
service_notes indicates OBD programming or coding
Compatible donor years: 2017
Always match the full part number before buying a used module.
coding and programming fields are absent or ambiguous
Compatible donor years: 2017
Always match the full part number before buying a used module.
Audi KESSY PEPS; VW Group MLB Evo security gateway; rolling code AES-128 system. ODIS required for key programming and module replacement. No obd pin extraction; akl supported.
Yes. Core Auto Logic supports generation-scoped module programming for the Audi A5 (2017-2017). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
The Audi A5 (2017-2017) generation currently shows 9 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include Airbag Control Unit (ACU). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 8F0-959-655 - confirm for your exact year/VIN.
The merged generation data documents 6 ADAS systems, including Forward Camera (Mobileye EyeQ4), Forward Radar (Bosch MRR), Blind Spot Monitor - Left Radar (Continental SRR), Blind Spot Monitor - Right Radar (Continental SRR), and Rear View Camera. Calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Any Collision, and Any Module Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Yes. The generation data includes 2 SRS records, including Airbag Control Unit (ACU). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 8F0-959-655 - confirm for your exact year/VIN.
No assumption should be made across the full span. The generation page merges rows across 2017-2017; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Yes, where the VIN and security workflow support it. The generation data includes 5 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.