VIN / Build Split
VIN pos 4-8 identifies model/body/transmission/engine. Acura WMI: 19U, 5J8. Position 4-5 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2023 Acura MDX Supported Services
2023 Acura MDX
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform YD4
- CAN Architecture Honda HS-CAN; MOST bus (audio on Advance/Type S); LIN bus (body peripherals); OBD-II CAN ISO 15765-4
- Security IMMO4 AES-128 encryption; HON66 blade; HDS iN required for all key programming; NFC Digital Key active on Advance/Type S
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2023 Acura Mdx. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Information (BSI), this YD4 platform vehicle, HISS / Honda Smart Entry immobilizer support, Acura True Touchpad Interface infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
YD4
Production
2007-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD / AWD
Engine
-
CAN Speed
Honda HS-CAN; MOST bus (audio on Advance/Type S); LIN bus (body peripherals); OBD-II CAN ISO 15765-4
YEAR-SPECIFIC NOTES
Infotainment
Acura True Touchpad Interface
Wireless Support
CarPlay: Yes / Android Auto: Yes
Exact-year service summary for 2023 Acura Mdx
ADAS coverage
This 2023 Acura Mdx page documents 4 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Information (BSI), and Rear Camera (Multi-Angle Rearview).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Mirror Replacement, and Any Collision. Use the ADAS tab for the full trigger list.
View triggersTarget setup planning
Approved target-planning data maps this vehicle family to LAM01-04-L&LAM01-04-R. Primary Acura/Honda static target set for FCW/LDW and LKAS forward-camera calibration planning. Confirm VIN, trim, DTCs, sensor part number, and scan-tool procedure before setup.
View ADAS dataProgrammable modules
This page indexes 15 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2023 Acura Mdx.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2023 Acura Mdx using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
AcuraWatch (standard all trims): Lane Keeping Assist System, Collision Mitigatio - Standard; Platform: YD4 - Confirmed
Driver-assist suite
AcuraWatch (standard all trims): Lane Keeping Assist System, Collision Mitigation Braking System, Adaptive Cruise Control with Low-Speed Follow, Road Departure Mitigation, BSI (Advance/Type S); Digital Key NFC (Advance/Type S)
VIN and build split
VIN pos 4-8 identifies model/body/transmission/engine. Acura WMI: 19U, 5J8. Position 4-5 = model code. Position 10 = model year code.
Infotainment context
Acura True Touchpad Interface; True Touchpad Interface - 10.2-inch upper display + 7-inch lower touchpad; Wireless CarPlay/Android Auto; AcuraLink Connected Services
Connectivity notes
Wireless CarPlay: Yes; Wireless Android Auto: Yes
Network and access
CAN: Honda HS-CAN; MOST bus (audio on Advance/Type S); LIN bus (body peripherals); OBD-II CAN ISO 15765-4
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Honda HDS / i-HDS / AcuraLink Diagnostic
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2023 Acura MDX. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
4 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
1 module documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
2 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
5 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
10 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
AcuraWatch (standard all trims): Lane Keeping Assist System, Collision Mitigatio
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: YD4
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Acura Mdx issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Information (BSI), and Rear Camera (Multi-Angle Rearview) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - YD4 platform uses Honda HS-CAN; MOST bus (audio on Advance/Type S); LIN bus (body peripherals); OBD-II CAN ISO 15765-4.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
AcuraWatch (standard all trims): Lane Keeping Assist System, Collision Mitigation Braking System, Adaptive Cruise Control with Low-Speed Follow, Road Departure Mitigation, BSI (Advance/Type S); Digital Key NFC (Advance/Type S)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | ~36150-TYA-A01 | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | ~36802-TYA-A01 | |
| Blind Spot Information (BSI) | Side Camera | Camera | Static + Dynamic | YES | - | |
| Rear Camera (Multi-Angle Rearview) | Rear Camera | Camera | Static | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: AcuraWatch Camera, LKAS, CMBS, Adaptive Cruise Control
HDS iN static camera calibration required. Target ~1.0m from front bumper, level surface. Non-Honda glass can cause calibration failure. Verify camera part suffix for 2023 model year via iN before ordering.
Front Bumper Repair or Replacement Affected: Front Radar, Adaptive Cruise Control, CMBS, AEB
HDS iN radar alignment required. Inspect bracket. Vehicle at curb weight. Clear all radar DTCs after calibration.
Mirror Replacement Affected: BSI Camera
Camera-based BSI. HDS iN self-test and calibration recommended after mirror swap on equipped trims.
Any Collision Affected: SRS Unit, ADAS Camera, Front Radar, deployed airbags
Full scan mandatory. SRS replace-only after deployment. ADAS calibration required if front-end involved. Do not deliver with unresolved ADAS or SRS DTCs.
BCM Replacement Affected: Digital Key NFC, Immobilizer, Smart Entry
HDS iN required. NFC Digital Key must be re-paired after BCM replacement on Advance/Type S. Immobilizer relearn required. Inform customer to re-pair all Digital Keys.
Any Module Replacement Affected: All VIN-coded modules (BCM, ECM, SRS, ABS)
HDS iN programming required. Immobilizer relearn if ECM or BCM replaced. ABS requires iN bleeding procedure. SRS replace-only.
Forward Camera Replacement
Camera module replacement requires full recalibration using HDS.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using HDS.
Rear Bumper Repair or Replacement
BSD radar alignment required after rear bumper R&R. Use HDS.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using HDS.
SRS Modules
SRS Control Unit 78800TYAA880M1
- Part number
- 78800TYAA880M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
SRS Control Unit 78850TYAA881M1
- Part number
- 78850TYAA881M1
- Location
- Under center console
- Manufacturer
- Denso
- Notes
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
ECU Modules
ECM - J35Y9 3.5L V6 NA ~37820-6EW-A01
- Part number
- ~37820-6EW-A01
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas / Bosch ME17 series
- Notes
- HDS iN Programming Port. Immobilizer linked - key relearn via iN after ECM replacement. Battery stable at >=80% SOC or charger connected during programming. VIN write included in iN PMI flow.
ECM - J30 3.0L Turbo (Type S) ~37820-RBB-A01
- Part number
- ~37820-RBB-A01
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas / Bosch ME17 series
- Notes
- Type S turbo ECM. HDS iN required. Do not substitute NA V6 ECM. Immobilizer linked.
PCM - Type S Hybrid ~1K000-TYA-A01
- Part number
- ~1K000-TYA-A01
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Renesas hybrid PCM MCU
- Notes
- HDS iN mandatory. HV system calibration required after PCM replacement. Do not attempt without HV training. Battery management module may require separate programming.
BCM Modules
Body Control Module (BCM) ~38809-TYA-A01
- Part number
- ~38809-TYA-A01
- Security
- AES-128
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- HDS iN required - VIN coding, immobilizer sync, option configuration. Clone supported. New BCM requires full iN software write. Handles smart entry, lighting, power windows, NFC Digital Key hardware interface.
TCU / TCM Transmission Modules
TCU - ZF 10-Speed Auto 28100-6B1
- Part number
- 28100-6B1
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Continental MPC5777M
- Notes
- ZF 10-speed automatic. Requires Honda HDS or J2534 for programming. ATF Type 3.1 fluid spec. VIN coding mandatory. Adaptive relearn via 30-mile drive cycle.
ABS / Brake Modules
ABS/VSA Module (Bosch) ~57110-TYA-A01
- Part number
- ~57110-TYA-A01
- Cloning supported
- Yes
- Notes
- Bosch ABS/VSA. Clone supported. HDS iN programming required on new unit. Automated brake bleed procedure via iN required after replacement. Inspect wheel speed sensor connectors before module swap. EPB must be retracted via iN service mode before rear caliper service.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 78100-TYS-A11, 78100-TYR-A11
- Part number
- 78100-TYS-A11, 78100-TYR-A11
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (cable reel 77900 family)
Connectivity & Accessories
AcuraLink Infotainment (True Touchpad Interface)
- Notes
- 10.2-inch upper display + 7-inch lower True Touchpad Interface. Wireless Apple CarPlay and Android Auto. HDS iN required for display unit programming.
Digital Key NFC (Active MY2023)
- Notes
- NFC Digital Key fully active on 2023 Advance and Type S. Uses Honda Digital Key app. BCM programming required if NFC hardware is replaced. Advise customer to re-pair digital keys after BCM replacement. Hardware-based NFC - not OTA software toggle.
Head-Up Display (HUD)
- Notes
- Available on Advance and Type S. HDS iN required after replacement. Verify windshield reflective coating before HUD calibration.
Electronic Parking Brake (EPB)
- Notes
- EPB actuator requires HDS iN service mode to retract caliper piston before rear brake pad service. Failure to use iN service mode can damage actuator.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Unibody; aluminum-intensive structure; high-strength steel safety cage
- OBD Protocol
- ISO 15765-4 CAN (500kbps HS-CAN)
- CAN Architecture
- Honda HS-CAN; MOST bus (audio on Advance/Type S); LIN bus (body peripherals); OBD-II CAN ISO 15765-4
- Infotainment
- True Touchpad Interface - 10.2-inch upper display + 7-inch lower touchpad; Wireless CarPlay/Android Auto; AcuraLink Connected Services
- OTA Capable
- No
- Infotainment Name
- Acura True Touchpad Interface
- Wireless CarPlay
- Yes
- Wireless Android Auto
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2023 - 3.5L V6 (J35Y5), 3.5L V6 i-VTEC (J35Y5), 3.7L V6 (J37A1).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Officially supported (openpilot master)
- Package
- AcuraWatch
- Hardware
- Comma 3X + Honda Bosch C harness
- Harness
- Honda Bosch C Harness
Bosch platform; full openpilot support on 2022+ MDX.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2023 Acura Mdx?
ADAS calibration pricing for a 2023 Acura Mdx depends on which of its 4 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Information (BSI), and Rear Camera (Multi-Angle Rearview). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2023 Acura Mdx?
Yes. The 2023 Acura Mdx uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 78800TYAA880M1. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2023 Acura Mdx?
After windshield replacement on a 2023 Acura Mdx, Forward Camera (Monocular), Forward Radar (77GHz), and Rear Camera (Multi-Angle Rearview) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2023 Acura Mdx module service take?
Most 2023 Acura Mdx onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (3 ECU, 1 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2023 Acura Mdx on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2023 Acura Mdx. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2023 Acura Mdx programming?
Every programming, cloning, and calibration job on the 2023 Acura Mdx is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2023 Acura Mdx can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2023 Acura Mdx. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 4 ADAS module
Infotainment on this platform: Acura True Touchpad Interface. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2023 Acura MDX covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- ~36150-TYA-A01, ~36802-TYA-A01
- ECU / PCM Part Numbers
- ~37820-6EW-A01, ~37820-RBB-A01, ~1K000-TYA-A01
- BCM / Body Module Part Numbers
- ~38809-TYA-A01
- TCU / TCM Part Numbers
- 28100-6B1
- SRS / Airbag Module Part Numbers
- 78800TYAA880M1, 78850TYAA881M1
- ABS / EBCM Part Numbers
- 57110-TYA-A01, MDX YD4
- Instrument Cluster (IPC) Part Numbers
- 78100-TYS-A11, 78100-TYR-A11
- Transmission Control Module (TCM) Part Numbers
- 28100-6B1
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (CABLE REEL 77900 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2023 Acura Mdx
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
i-HDS Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.