Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065ADAS, Module Repair & Programming
SR5, TRD Pro, Limited, Platinum, Capstone trims. Hybrid V6 standard 2022+. TRD Pro adds Crawl Control module.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 Toyota Sequoia. On this vehicle we cover documented systems include Forward Camera (Mobileye EyeQ4) - Sequoia, Forward Radar (Denso mm-wave) - Sequoia, and Blind Spot Monitor / RCTA (Denso radar) - Sequoia, this Toyota TNGA-F (BOF truck, 3rd gen 2022 redesign) platform vehicle, Toyota Smart Key Gen 4; BCM rolling code PEPS immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
This 2025 Toyota Sequoia page documents 6 ADAS systems, including Forward Camera (Mobileye EyeQ4) - Sequoia, Forward Radar (Denso mm-wave) - Sequoia, Blind Spot Monitor / RCTA (Denso radar) - Sequoia, and Rear View Camera - Sequoia.
View ADAS dataDocumented calibration triggers include Windshield Replacement, Forward Camera Replacement, Forward Radar Replacement, and BSM Sensor Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 15 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 3 gateway, immobilizer, or key-security records for this 2025 Toyota Sequoia.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2025 Toyota Sequoia using the documented systems and module data on this page.
Choose a sectionToyota Safety Sense 2.5+ (TSS-2.5): Pre-Collision System with Pedestrian/Cyclist - Available; Immobilizer: Toyota Smart Key Gen 4 - Standard; Platform: Toyota TNGA-F (BOF truck, 3rd gen 2022 redesign) - Confirmed
Toyota Safety Sense 2.5+ (TSS-2.5): Pre-Collision System with Pedestrian/Cyclist Detection, Radar Cruise Control, Lane Departure Alert with Steering Assist, Automatic High Beams, Lane Tracing Assist, Road Sign Assist
Toyota Audio Multimedia 14" touchscreen; wireless CarPlay/Android Auto; OTA via Toyota Connected Services
CAN: HS-CAN (500 kbps) + CANFD; Toyota network; OBD2 DLC Pin 6/14
Choose a section to view data
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Verify platform code matches when cross-referencing part numbers across model years.
Common Toyota Sequoia issues we resolve on this platform: Forward Camera (Mobileye EyeQ4) - Sequoia, Forward Radar (Denso mm-wave) - Sequoia, Blind Spot Monitor / RCTA (Denso radar) - Sequoia, and Rear View Camera - Sequoia recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Toyota TNGA-F (BOF truck, 3rd gen 2022 redesign) platform uses HS-CAN (500 kbps) + CANFD; Toyota network; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - Toyota Smart Key Gen 4; BCM rolling code PEPS immobilizer; add-key procedure.
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. 2023+ new-gen Sequoia not ported.
Documented for the 3rd Gen XK70 - includes this 2025 model year. Open the full coverage on the generation guide.
ADAS calibration pricing for a 2025 Toyota Sequoia depends on which of its 6 documented systems need work after a repair. This vehicle is documented with Forward Camera (Mobileye EyeQ4) - Sequoia, Forward Radar (Denso mm-wave) - Sequoia, Blind Spot Monitor / RCTA (Denso radar) - Sequoia, Rear View Camera - Sequoia, and Rear Cross Traffic Alert (RCTA) - Sequoia. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs and we return a number within 4 hours.
Yes. The 2025 Toyota Sequoia uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 891700C540. Bench-only or in-vehicle - both paths are supported. Send the part number and a description of what triggered the light, and we will provide a quote and ETA.
After windshield replacement on a 2025 Toyota Sequoia, Forward Camera (Mobileye EyeQ4) - Sequoia, Forward Radar (Denso mm-wave) - Sequoia, and Rear View Camera - Sequoia rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site (DFW Metroplex) with OE target fixtures or via mail-in for the front camera/radar module.
Most 2025 Toyota Sequoia jobs complete same-day once the vehicle or module arrives. This vehicle has roughly 16 programmable modules documented in our database (5 ECU, 2 BCM, 1 TCU, 2 ABS, plus IPC/SAS/gateway/accessory). Module-bench work (ECU clones, BCM reprograms, SRS resets) ships back inside 1-3 business days including return shipping. ADAS calibration is on-site for DFW or mail-in for the front module.
Both. We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding) and a mail-in bench for module-only jobs (ECU cloning, BCM repair, SRS reset, TCU clone). Quote the work and we will tell you which path is right for the 2025 Toyota Sequoia.
Every programming, cloning, and calibration job on the 2025 Toyota Sequoia is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Yes, our key programming specialists handle all-keys-lost scenarios on the 2025 Toyota Sequoia. Immobilizer generation on this platform: Toyota Smart Key Gen 4; BCM rolling code PEPS. Submit the VIN and we will confirm the procedure and quote before scheduling.
We program, clone, repair, or replace the full programmable-module stack on a 2025 Toyota Sequoia. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Send your VIN and we'll confirm exact module support and pricing for your specific vehicle within 4 hours.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.