Choose a make, model and year, or start with a VIN.
ADAS calibration, module programming, and security relearns
1958, 1958 First Edition trims. Twin-turbo V6. Verify Multi-Terrain Monitor cameras after body repair.
Choose a service to start your quote.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 Toyota Land-Cruiser. On this vehicle we cover documented systems include Forward Camera (Mobileye EyeQ4) - Land Cruiser, Forward Radar (Denso) - Land Cruiser, and Blind Spot Monitor / RCTA (Denso radar) - Land Cruiser, this Toyota TNGA-F (GA-F, 300 Series BOF frame) platform vehicle, Toyota Smart Key Gen 4; PEPS rolling code immobilizer support. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
This 2025 Toyota Land-Cruiser page documents 7 ADAS systems, including Forward Camera (Mobileye EyeQ4) - Land Cruiser, Forward Radar (Denso) - Land Cruiser, Blind Spot Monitor / RCTA (Denso radar) - Land Cruiser, and Rear View Camera - Land Cruiser.
View ADAS dataDocumented calibration triggers include Windshield Replacement, Forward Camera Replacement, Forward Radar Replacement, and BSM Sensor Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 22 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 3 gateway, immobilizer, or key-security records for this 2025 Toyota Land-Cruiser.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2025 Toyota Land-Cruiser using the documented systems and module data on this page.
Choose a sectionToyota Safety Sense 2.5+ (TSS-2.5): Pre-Collision System, Radar Cruise, Lane Tra - Available; Platform: Toyota TNGA-F (GA-F, 300 Series BOF frame) - Confirmed
Toyota Safety Sense 2.5+ (TSS-2.5): Pre-Collision System, Radar Cruise, Lane Tracing Assist, Automatic High Beams, Road Sign Assist, Panoramic View Monitor with off-road view modes
Toyota Audio Multimedia 12.3" touchscreen; head-up display; OTA via Toyota Connected Services
CAN: HS-CAN (500 kbps) + CANFD; Toyota network; OBD2 DLC Pin 6/14
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
Documented module coverage for the 2025 Toyota Land-Cruiser. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabPowertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBody control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTransmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabCrash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabInstrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabInfotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabService events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Verify platform code matches when cross-referencing part numbers across model years.
Common Toyota Land-Cruiser issues we resolve on this platform: Forward Camera (Mobileye EyeQ4) - Land Cruiser, Forward Radar (Denso) - Land Cruiser, Blind Spot Monitor / RCTA (Denso radar) - Land Cruiser, and Rear View Camera - Land Cruiser recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Toyota TNGA-F (GA-F, 300 Series BOF frame) platform uses HS-CAN (500 kbps) + CANFD; Toyota network; OBD2 DLC Pin 6/14.
Toyota Safety Sense 2.5+ (TSS-2.5): Pre-Collision System, Radar Cruise, Lane Tracing Assist, Automatic High Beams, Road Sign Assist, Panoramic View Monitor with off-road view modes
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Mobileye EyeQ4) - Land Cruiser | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Denso) - Land Cruiser | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor / RCTA (Denso radar) - Land Cruiser | Rear Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera - Land Cruiser | Rear Camera | Camera | Static | YES | - | |
| Panoramic View Monitor (Multi-Camera) - Land Cruiser | Surround Camera | Camera | None | YES | - | |
| Rear Cross Traffic Alert (RCTA) - Land Cruiser | Rear Side Radar | Radar | Static + Dynamic | YES | - | |
| Park Distance Control (PDC) Front + Rear - Land Cruiser | Ultrasonic | Ultrasonic | None | YES | - |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationUse Toyota Techstream and the correct model-year WSM/TIS target setup for this vehicle. Confirm target distance, target height, level-surface requirements, and required static or dynamic steps before calibration; clear and recheck ADAS DTCs after setup.
Confirm the correct forward camera part and application by VIN. Initialize and calibrate with Toyota Techstream using the correct model-year WSM/TIS procedure; verify steering angle, ADAS health, and DTC status after calibration.
Gas: 88210-06070. Hybrid: verify TIS. Techstream boresight. Bumper on before final cal.
Techstream BSM init. Road verify 20+ mph.
Use Toyota TIS/Techstream with the correct calibration file and service procedure for this exact vehicle year. Preserve or relearn VIN, immobilizer, injector, throttle, and learned-value data as required; complete a post-programming scan and readiness check.
Techstream ABS/VSC init + SAS zero-point + ESA verify. 35+ mph straight run.
Toyota key/security ECU work requires authorized TIS/Techstream access. Confirm key count and immobilizer generation by VIN before replacement or registration; verify every key starts the vehicle and no security DTCs remain.
Camera module replacement requires full recalibration using Techstream.
Inspect and recalibrate forward camera after any front-end collision using Techstream.
Forward radar angular alignment required after front bumper R&R. Use Techstream.
BSD radar alignment required after rear bumper R&R. Use Techstream.
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use Techstream if applicable.
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. 2024+ J250 Land Cruiser not ported.
ADAS calibration pricing for a 2025 Toyota Land-Cruiser depends on which of its 7 documented systems need work after a repair. This vehicle is documented with Forward Camera (Mobileye EyeQ4) - Land Cruiser, Forward Radar (Denso) - Land Cruiser, Blind Spot Monitor / RCTA (Denso radar) - Land Cruiser, Rear View Camera - Land Cruiser, and Panoramic View Monitor (Multi-Camera) - Land Cruiser. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Yes. The 2025 Toyota Land-Cruiser uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 891700E410. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
After windshield replacement on a 2025 Toyota Land-Cruiser, Forward Camera (Mobileye EyeQ4) - Land Cruiser, Forward Radar (Denso) - Land Cruiser, Rear View Camera - Land Cruiser, and Panoramic View Monitor (Multi-Camera) - Land Cruiser rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
Most 2025 Toyota Land-Cruiser onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 18 programmable modules documented in our database (6 ECU, 2 BCM, 2 TCU, 2 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2025 Toyota Land-Cruiser. Do not ship a module unless support confirms next steps.
Every programming, cloning, and calibration job on the 2025 Toyota Land-Cruiser is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
We program, clone, repair, or replace the full programmable-module stack on a 2025 Toyota Land-Cruiser. For this vehicle our database documents:
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2025 Toyota Land-Cruiser covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Send your VIN and we'll confirm exact module support and pricing in the quote response.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.