VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2023 Toyota Crown Supported Services
2023 Toyota Crown
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform Toyota XS20 (TNGA-K, Crown - 2023 US reimport)
- CAN Architecture CAN-FD backbone + LIN sub-bus + Ethernet (multimedia); Toyota T-Connect gateway; OBD2 DLC Pin 6/14 CAN
- Security Toyota Smart Key (312/314MHz US) + Digital Key (NFC/BLE on equipped trims); immobilizer Type 7 transponder; AKL via Techstream + dealer auth; remote programming unavailable
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2023 Toyota Crown. On this vehicle we cover documented systems include Forward Camera (Monocular), TSS 3.0 Millimeter Wave Radar (Front) - FCM integrated, and Side Blind Zone Alert / Rear Cross Traffic Alert Radar - L/R, this Toyota XS20 (TNGA-K, Crown - 2023 US reimport) platform vehicle, Toyota Type 7 (TNGA-K platform immobilizer) immobilizer support, Toyota Audio Multimedia infotainment programming. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
Toyota XS20 (TNGA-K, Crown - 2023 US reimport)
Production
2023-present
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
AWD
Engine
-
CAN Speed
CAN-FD backbone + LIN sub-bus + Ethernet (multimedia); Toyota T-Connect gateway; OBD2 DLC Pin 6/14 CAN
YEAR-SPECIFIC NOTES
Infotainment
Toyota Audio Multimedia
Exact-year service summary for 2023 Toyota Crown
ADAS coverage
This 2023 Toyota Crown page documents 5 ADAS systems, including Forward Camera (Monocular), TSS 3.0 Millimeter Wave Radar (Front) - FCM integrated, Side Blind Zone Alert / Rear Cross Traffic Alert Radar - L/R, and Panoramic View Monitor Camera System (if equipped).
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Mirror Replacement. Use the ADAS tab for the full trigger list.
View triggersProgrammable modules
This page indexes 16 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2023 Toyota Crown.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2023 Toyota Crown using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Toyota Safety Sense 3.0 (TSS 3.0): Pre-Collision System with Automatic Emergency - Standard; Platform: Toyota XS20 (TNGA-K, Crown - Confirmed
Driver-assist suite
Toyota Safety Sense 3.0 (TSS 3.0): Pre-Collision System with Automatic Emergency Braking + pedestrian/cyclist/motorcyclist detection, Radar Cruise Control with Curve Speed Reduction, Lane Departure Alert with Steering Assist, Automatic High Beams, Lane Tracing Assist, Road Sign Assist, Proactive Driving Assist - all standard
VIN and build split
VIN pos 4-8 identifies model/body/engine. Toyota WMI: 2T1 (Camry), 4T1 (Corolla/RAV4), 5TD (Highlander). Position 7 = engine. Position 10 = model year code.
Infotainment context
Toyota Audio Multimedia; Toyota Audio Multimedia: 12.3" standard; wireless CarPlay/Android Auto; OTA updates via T-Connect; 14-speaker JBL premium audio on Platinum
Network and access
CAN: CAN-FD backbone + LIN sub-bus + Ethernet (multimedia); Toyota T-Connect gateway; OBD2 DLC Pin 6/14 CAN
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Toyota Techstream / Toyota GTS+
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2023 Toyota Crown. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
5 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
4 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
3 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
1 module documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
4 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
8 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 2
Toyota Safety Sense 3.0 (TSS 3.0): Pre-Collision System with Automatic Emergency
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Platform: Toyota XS20 (TNGA-K, Crown
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Toyota Crown issues we resolve on this platform: Forward Camera (Monocular), TSS 3.0 Millimeter Wave Radar (Front) - FCM integrated, Side Blind Zone Alert / Rear Cross Traffic Alert Radar - L/R, and Panoramic View Monitor Camera System (if equipped) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Toyota XS20 (TNGA-K, Crown - 2023 US reimport) platform uses CAN-FD backbone + LIN sub-bus + Ethernet (multimedia); Toyota T-Connect gateway; OBD2 DLC Pin 6/14 CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Toyota Safety Sense 3.0 (TSS 3.0): Pre-Collision System with Automatic Emergency Braking + pedestrian/cyclist/motorcyclist detection, Radar Cruise Control with Curve Speed Reduction, Lane Departure Alert with Steering Assist, Automatic High Beams, Lane Tracing Assist, Road Sign Assist, Proactive Driving Assist - all standard
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Stereo Camera | Camera | Static | YES | ~88212-62010 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| TSS 3.0 Millimeter Wave Radar (Front) - FCM integrated | Front Radar | Radar | Static | YES | ~88210-62010 (FRONT RADAR ECU - (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Side Blind Zone Alert / Rear Cross Traffic Alert Radar - L/R | Rear Radar | Radar | None | YES | ~88162-62010 L, ~88162-62020 R (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Panoramic View Monitor Camera System (if equipped) | Surround Camera | Camera | Static | YES | ~86790-62010 (PVM ECU | |
| Proactive Driving Assist (PDA) - integrated in FCM+HV ECU | Fused (Camera + Radar + HV ECU) | Fused | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: TSS 3.0 FCM (camera + radar), Pre-Collision System, LDA, AHB, LTA, Road Sign Assist, PDA
TSS 3.0 FCM static calibration required. Techstream calibration routine with Toyota mat pattern. Vehicle on level surface. Battery at 12V+. Both radar and camera in calibration scope. DTC verify post-calibration. Do not return vehicle until all TSS 3.0 DTCs clear.
Front Bumper Repair or Replacement Affected: TSS 3.0 Front Radar, Pre-Collision System, Adaptive Cruise, PDA
Front radar static calibration via Techstream. Inspect radar bracket for deformation. Level surface. Radar and camera calibrations run together in TSS 3.0 routine.
Rear Bumper Repair or Replacement Affected: Blind Spot Monitor, RCTA, PVM (if equipped)
BSM radar initialization via Techstream if sensors disturbed. PVM calibration if any rear camera disturbed. Road verify BSM at 15+ mph.
Mirror Replacement Affected: PVM side cameras, BSM mirror indicators
PVM calibration required if side mirror cameras disturbed. BSM mirror indicator function verify. Techstream PVM mat routine for all cameras.
HV / PHEV Battery or Motor Service Affected: HV ECU, Battery ECU, PHEV ECU, Regenerative Braking, PDA
HV safety procedures mandatory before any hybrid drivetrain work. Techstream HV adaptation after any HV component replacement. Verify regenerative braking, EV range display (PHEV), and charging port function. PDA recalibration may be needed if HV ECU replaced.
Any Module Replacement Affected: HV ECU, ECM, Body ECU, Smart Key ECU, ASA, ABS ECU
Techstream + Programming Port + dealer auth required. No module is plug and play on XS20. ECM requires immobilizer re-pairing. Smart Key ECU replacement requires Digital Key cloud re-enrollment.
Forward Camera Replacement
Camera module replacement requires full recalibration using Techstream.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using Techstream.
SRS Modules
Center Airbag Sensor Assembly (Front)
- Notes
- Front center impact sensor mounted on floor tunnel or front crossmember. Replace if physically damaged or DTC set for sensor fault. Techstream SRS DTC clear after replacement. Torque to WSM specification.
ECU Modules
Hybrid Control ECU (HV ECU) - 2.5L Hybrid ~89650-62010 (VERIFY VIA TPDS)
- Part number
- ~89650-62010 (VERIFY VIA TPDS)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Denso HV ECU (TNGA-K)
- Notes
- TNGA-K hybrid powertrain ECU. Techstream Programming Port programming. HV safety procedures mandatory. Controls 2.5L Atkinson + dual eMotors + eCVT. VIN-coded. Techstream HV adaptation required post-replacement. Coordinate with battery ECU if both replaced.
HV Battery ECU (Battery Control Module) - Hybrid ~89890-62010 (VERIFY VIA TPDS)
- Part number
- ~89890-62010 (VERIFY VIA TPDS)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Denso Battery ECU
- Notes
- Manages HV NiMH battery (hybrid) or Li-ion PHEV pack. Techstream battery ECU initialization. HV safety mandatory. Verify battery SOC and health monitoring post-replacement.
Engine ECU (ECM) - 2.5L A25A-FXS Hybrid ~89661-62010 (VERIFY VIA TPDS)
- Part number
- ~89661-62010 (VERIFY VIA TPDS)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Denso ECM (TNGA-K)
- Notes
- A25A-FXS 2.5L Atkinson cycle engine ECU. Techstream Programming Port + immobilizer re-pairing (Type 7). VIN-coded. Throttle body initialization via Techstream after replacement. Coordinate with HV ECU.
PHEV System ECU (Plug-in HV only) ~89660-62030 (VERIFY VIA TPDS - PHEV VARIANT)
- Part number
- ~89660-62030 (VERIFY VIA TPDS - PHEV VARIANT)
- Protocol / method
- OBD Programming Port
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Denso PHEV ECU
- Notes
- PHEV-specific system ECU for 340hp plug-in hybrid system. Li-ion 18.1mi EV range management. Techstream PHEV adaptation after replacement. HV safety mandatory. Verify charging port function, EV range display, and regenerative braking post-service.
BCM Modules
Body ECU ~89224-62010 (VERIFY VIA TPDS)
- Part number
- ~89224-62010 (VERIFY VIA TPDS)
- Security
- toyota_type7
- Coding required
- Yes
- Cloning supported
- Yes
- Notes
- Techstream programming required. Controls keyless entry, lighting, body functions, Digital Key integration. VIN-coded. Programming Port + Techstream. Coding required - NOT plug and play. Verify all body electrical functions and Digital Key pairing post-programming.
Smart Key ECU ~89990-62010 (VERIFY VIA TPDS)
- Part number
- ~89990-62010 (VERIFY VIA TPDS)
- Security
- toyota_type7_digital_key
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Manages Smart Key 312/314MHz RF + Digital Key NFC/BLE. Techstream programming + dealer auth required after replacement. Key re-registration required. Digital Key cloud pairing must be reset if Smart Key ECU replaced.
Power Management Control ECU ~89580-62010 (VERIFY VIA TPDS)
- Part number
- ~89580-62010 (VERIFY VIA TPDS)
- Security
- uds_coded
- Coding required
- Yes
- Cloning supported
- No
- Notes
- Manages HV system power distribution, DC-DC converter, and 12V auxiliary charging. Techstream initialization after replacement. HV safety procedures mandatory.
TCU / TCM Transmission Modules
TCU - Direct Shift 8AT UA80E 89530-30
- Part number
- 89530-30
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Renesas RH850
- Notes
- Aisin Direct Shift 8-speed, Toyota Techstream required, ATF WS specification, VIN coding and shift adaptation relearn mandatory
ABS / Brake Modules
ABS/VSC/TRAC Actuator and ECU Assembly ~44050-62010 (VERIFY VIA TPDS)
- Part number
- ~44050-62010 (VERIFY VIA TPDS)
- Cloning supported
- Yes
- Notes
- Techstream ABS ECU initialization after replacement. 4-wheel brake bleed required (Techstream automated bleed preferred). Steering angle sensor zero-point calibration via Techstream. Verify VSC and TRAC warning lamps extinguish.
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 83800-3AT00, 83800-3AV20
- Part number
- 83800-3AT00, 83800-3AV20
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- Coding required
- Yes
- Notes
- INTEGRATED (spiral cable 84306 family)
Connectivity & Accessories
Toyota Audio Multimedia 12.3" System ~86100-62010 (VERIFY VIA TPDS)
- Part number
- ~86100-62010 (VERIFY VIA TPDS)
- Notes
- Techstream initialization if replaced. OTA update capable via T-Connect. Wireless CarPlay/Android Auto. VIN registration required. Verify all ADAS display overlays (PDA, LDA, BSM indicators) functional post-replacement.
Digital Key Module (NFC / BLE - Limited / Platinum) ~89990-62020 (VERIFY VIA TPDS)
- Part number
- ~89990-62020 (VERIFY VIA TPDS)
- Notes
- Digital Key uses NFC (touch) and BLE (proximity). Techstream module initialization + Smart Key ECU coordination required. Cloud key sharing must be re-enrolled post-replacement. Verify Digital Key function with customer smartphone app.
Head-Up Display (HUD) ~88040-62010 (VERIFY VIA TPDS)
- Part number
- ~88040-62010 (VERIFY VIA TPDS)
- Notes
- Techstream HUD initialization after replacement. Pitch angle calibration may be required. Verify TSS 3.0 data overlay (speed, navigation, LDA alert) displays correctly.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Unibody - TNGA-K platform; high-strength steel + aluminum hybrid structure; fastback sedan profile
- OBD Protocol
- ISO 15765-4 CAN / CAN-FD
- CAN Architecture
- CAN-FD backbone + LIN sub-bus + Ethernet (multimedia); Toyota T-Connect gateway; OBD2 DLC Pin 6/14 CAN
- Infotainment
- Toyota Audio Multimedia: 12.3" standard; wireless CarPlay/Android Auto; OTA updates via T-Connect; 14-speaker JBL premium audio on Platinum
- OTA Capable
- Yes
- Infotainment Name
- Toyota Audio Multimedia
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2023 - 2.5L (4GRFSE), 2.5L 4WD (4GRFSE), 3.5L (2GRFSE).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - not in openpilot tree
Not in openpilot support tree as of April 2026. Crown sedan and Signia not in CARS.md.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2023 Toyota Crown?
ADAS calibration pricing for a 2023 Toyota Crown depends on which of its 5 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), TSS 3.0 Millimeter Wave Radar (Front) - FCM integrated, Side Blind Zone Alert / Rear Cross Traffic Alert Radar - L/R, Panoramic View Monitor Camera System (if equipped), and Proactive Driving Assist (PDA) - integrated in FCM+HV ECU. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2023 Toyota Crown?
Yes. The 2023 Toyota Crown uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2023 Toyota Crown?
After windshield replacement on a 2023 Toyota Crown, Forward Camera (Monocular) and Panoramic View Monitor Camera System (if equipped) rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2023 Toyota Crown module service take?
Most 2023 Toyota Crown onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 16 programmable modules documented in our database (4 ECU, 3 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2023 Toyota Crown on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2023 Toyota Crown. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2023 Toyota Crown programming?
Every programming, cloning, and calibration job on the 2023 Toyota Crown is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2023 Toyota Crown can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2023 Toyota Crown. For this vehicle our database documents:
- 4 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 3 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 5 ADAS module
Infotainment on this platform: Toyota Audio Multimedia. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2023 Toyota Crown covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- ~86790-62010 (PVM ECU
- ECU / PCM Part Numbers
- 89661-4D650, 2023-2025), 89661-3AF60
- BCM / Body Module Part Numbers
- ~89224-62010 (VERIFY VIA TPDS), ~89990-62010 (VERIFY VIA TPDS), ~89580-62010 (VERIFY VIA TPDS)
- TCU / TCM Part Numbers
- 89530-30
- SRS / Airbag Module Part Numbers
- 89170-30, 8917A-30040 (PEDESTRIAN PROTECTION SENSOR)
- ABS / EBCM Part Numbers
- 44050-62010
- Instrument Cluster (IPC) Part Numbers
- 83800-3AT00, 83800-3AV20
- Transmission Control Module (TCM) Part Numbers
- 89530-30
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (SPIRAL CABLE 84306 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2023 Toyota Crown
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
Techstream / GTS+ Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.