Basic: Rear view camera only (2011-2018)
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2008-2013 Nissan Rogue Generation Guide
Nissan Rogue 1st Gen S35 (2008-2013) ADAS Calibration & Module Programming
Covers model years 2008-2013 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Nissan Rogue built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform S35 (1st Gen, 2008-2013)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Nissan NATS5 (ID46 Philips transponder); traditional key or Intelligent Key (FOBIK); PIN extraction via CONSULT-III+ possible; AKL requires CONSULT + PIN code + NATS ECM registration
The ADAS, module, and security rows below are consolidated across the full 2008-2013 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2008-2013”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2008 Nissan Rogue. On this vehicle we cover documented systems include Rear View Camera, this S35 (1st Gen, 2008-2013) platform vehicle, NATS / I-Key immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
S35 (1st Gen, 2008-2013)
Production
2008-present
Trim Levels
-
Drivetrain
FWD / AWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Feature availability 3
Immobilizer: NATS / I-Key
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: S35 (1st Gen, 2008-2013)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Nissan CONSULT-III Plus
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
Generation service summary for Nissan Rogue 1st Gen S35 (2008-2013)
Generation coverage
This page consolidates Nissan Rogue service data for 2008-2013 across 6 model years; 6 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 2 system records, including Rear View Camera (2008-2009, 2012-2013) and Rear View Camera (2010-2011). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 2 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 26 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 4 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Nissan Rogue 2008-2013 span, with exact-year validation before service.
Get a quoteDo I need calibration?
ECM Replacement 1
2008-2013
Yes
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement 1
2008-2013
Yes
CONSULT ABS bleed + VDC sensor reset.
Year-by-year details
| Year | VIN split | Trim notes |
|---|---|---|
| 2008 | ||
| 2009 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+). |
| 2010 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+). |
| 2011 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+). |
| 2012 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+). |
| 2013 | VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code. | Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+). |
What changes across 2008-2013
Differences versus the generation reference year. Years not listed here match the shared platform data on this page.
2009
- VIN split: VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
- Trims: Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+).
2010
- VIN split: VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
- Trims: Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+).
2011
- VIN split: VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
- Trims: Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+).
2012
- VIN split: VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
- Trims: Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+).
2013
- VIN split: VIN pos 4-8 identifies model/body/engine. Nissan WMI: 1N4, 5N1, JN1. Position 4-5 = model. Position 10 = model year code.
- Trims: Trims: S, SV, SL, Platinum. Safety Shield 360 standard SV+ (2021+).
2 ADAS systems documented across 2008-2013. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Basic: Rear view camera only (2011-2018)
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera 2008-2009, 2012-2013 | Rear Camera | Camera | None | Conditional | - | |
| Rear View Camera 2010-2011 | Rear Camera | Camera | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
ECM Replacement
CONSULT immobilizer work support + throttle position relearn.
ABS/VDC Module Replacement
CONSULT ABS bleed + VDC sensor reset.
Modules we program on this generation
26 documented Nissan Rogue modules across 2008-2013. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
SRS Control Unit Verify by VIN 2008, 2013 K8510-JM12A
_years covers only 2008, 2013 for this generation
Used/donor module guide
Compatible donor years: 2008, 2013
Always match the full part number before buying a used module.
- PART
- K8510-JM12A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2008 98820-JM100
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 98820-JM100
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
SRS Control Unit Verify by VIN 2009-2012 K8510JM12A
_years covers only 2009-2012 for this generation
Used/donor module guide
Compatible donor years: 2009, 2010, 2011, 2012
Always match the full part number before buying a used module.
- PART
- K8510JM12A
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires Consult III+ or J2534. Clear SRS DTCs after installation. Battery disconnect and 3-minute wait before module removal.
ECU MODULES
ECU Modules
Engine Control Module (ECM) - 2.5L QR25DE I4 x2
23710-JM01A Verify by VIN 2008 J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 23710-JM01A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2008-2009 Rogue S/SL 2.5L QR25DE I4; confirmed at nissanpartsdeal.com cross-fitment page. Replaced by JM01C. CVT transmission variant documented on eBay listing. | Sources: https://www.nissanpartsdeal.com/parts/nissan-engine-control~23710-jm01a.html
23710-JM01C Verify by VIN 2009 J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
- PART
- 23710-JM01C
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2008-2009 Rogue S/SL 2.5L QR25DE; supersedes JM01A and JM01B. Confirmed at nissanpartsdeal.com 2009 page. | Sources: https://www.nissanpartsdeal.com/oem-2009-nissan-rogue-engine_control_module.html
Engine Control Module (ECM) - 2.5L QR25DE I4 (variant) x2
23710-JM02A Verify by VIN 2008 J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 23710-JM02A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2008-2009 Rogue S/SL 2.5L QR25DE I4; listed at nissanpartsdeal.com 2008 page. Replaced by JM02B. Additional 2008 variants: JM00A, JM00B, JM03A, JM03C, JM70A, JM71A, JM72A, JM73A. | Sources: https://www.nissanpartsdeal.com/oem-2008-nissan-rogue-engine_control_module.html
23710-JM72C Verify by VIN 2009 J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
- PART
- 23710-JM72C
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2009 Rogue 2.5L QR25DE; confirmed on fs1inc.com with hardware number MEC111-030 B1. | Sources: https://www.fs1inc.com/23710-jm72c-2009-nissan-rogue-2-5l-pcm-engine-computer-ecm-ecu-programmed-plug-play-mec111-030-b1.html
Engine Control Module (ECM) - 2.5L QR25DE I4 (current supersession) Verify by VIN 2008 x1
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
- PART
- 23710-JM01C
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2008-2009 Rogue; supersedes JM01A and JM01B. Listed as current replacement at nissanpartsdeal.com. | Sources: https://www.nissanpartsdeal.com/oem-2008-nissan-rogue-engine_control_module.html
Engine Control Module (ECM) - 2.5L QR25DE I4 (CZ series) Verify by VIN 2009 x1
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
- PART
- 23710-CZ30A
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- NOTES
- 2009 Rogue QR25DE; CZ-series appears on 2009 page alongside JM-series. Replaced by CZ30E. Additional 2009 CZ variants: CZ31A, CZ32A, CZ33A. | Sources: https://www.nissanpartsdeal.com/oem-2009-nissan-rogue-engine_control_module.html | Confidence: medium
ECM - 2.5L QR25DE I4 Verify by VIN 2010-2013 x1
_years covers only 2010-2013 for this generation
Used/donor module guide
Compatible donor years: 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Nissan Rogue ECM. CONSULT-III+ IMMO + VIN write.
BCM MODULES
BCM Modules
BCM (Body Control Module) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Nissan BCM. CONSULT-III+ work support for key registration + module ID.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - CVT Continuously Variable Transmission Verify by VIN 2008-2009 31036-JG40X
_years covers only 2008-2009 for this generation
Used/donor module guide
Compatible donor years: 2008, 2009
Donor must match part family 31036-JG40X; VIN-locked
Always match the full part number before buying a used module.
- PART
- 31036-JG40X
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas SH7058
- NOTES
- CVT relearn required via CONSULT-III, NS-2 CVT fluid specification, immobilizer sync needed
TCU - CVT (Xtronic) Verify by VIN 2010-2011 31036-1XF0X
_years covers only 2010-2011 for this generation
Used/donor module guide
Compatible donor years: 2010, 2011
Donor must match part family 31036-1XF0X - requires cloning
Always match the full part number before buying a used module.
- PART
- 31036-1XF0X
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7058
- NOTES
- CVT relearn required via CONSULT-III. Use NS-2 CVT fluid. VIN programming mandatory.
TCU - CVT2 Continuously Variable Transmission Verify by VIN 2012-2013 31036
_years covers only 2012-2013 for this generation
Used/donor module guide
Compatible donor years: 2012, 2013
Donor must match part family 31036 - requires cloning
Always match the full part number before buying a used module.
- PART
- 31036
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas SH7058
- NOTES
- CVT relearn required after programming. Use CONSULT-III+ or equivalent. NS-3 CVT fluid specification. Clear adaptation values before relearn.
ABS / BRAKE MODULES
ABS / Brake Modules
ABS Actuator and Electric Unit (Control Unit) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Nissan ABS/VDC. CONSULT-III+ self-diagnosis + air bleeding work support.
Wheel Speed Sensor - Front (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Active sensor. DTC C1101/C1102 series.
Wheel Speed Sensor - Rear (each) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Active sensor.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) Verify by VIN 2010 24810-JM00A
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Donor must match part family 24810-JM00A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-JM00A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2011 24810-JM10A
_years covers only 2011 for this generation
Used/donor module guide
Compatible donor years: 2011
Donor must match part family 24810-JM10A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-JM10A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2012 24810-JM20A
_years covers only 2012 for this generation
Used/donor module guide
Compatible donor years: 2012
Donor must match part family 24810-JM20A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-JM20A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2013 24810-JM30A
_years covers only 2013 for this generation
Used/donor module guide
Compatible donor years: 2013
Donor must match part family 24810-JM30A - requires cloning
Always match the full part number before buying a used module.
- PART
- 24810-JM30A
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
RKE, Intelligent Key, sonar, camera, and convenience options - if equipped Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Convenience equipment is package-dependent. Use Nissan service information for module replacement, option configuration, DTC checks, and subscription-dependent feature verification.
4 gateway, immobilizer, and security items documented across 2008-2013.
GATEWAY / SECURITY MODULES
Gateway / Security Modules
Central Gateway Module Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- MFG
- NXP / Freescale
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- MPC5606BK
- NOTES
- Compatibility label: X-TRAIL. BCM | Notes: Read/Write
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System NATS / I-Key
- Add Key Yes
- All Keys Lost Yes
Nissan NATS5 (ID46 Philips transponder); traditional key or Intelligent Key (FOBIK); PIN extraction via CONSULT-III+ possible; AKL requires CONSULT + PIN code + NATS ECM registration
IMMOBILIZER MODULES
Immobilizer Modules
NATS (Nissan Anti-Theft System) - IPDM/BCM Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Nissan NATS5/NATS6. CONSULT-III+ IMMO registration. AKL: CONSULT PIN extraction possible pre-2015.
KEY & FOB TYPES
Key & Fob Types
Nissan Transponder Key (ID46 / NATS chip) Bench clone required
notes indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- ID46 Philips. CONSULT-III+ registration or aftermarket (Autel). Max 4 keys (NATS5).
Nissan Intelligent Key (Proximity) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2008, 2009, 2010, 2011, 2012, 2013
Always match the full part number before buying a used module.
- NOTES
- Push-to-start. CONSULT registration. Max 4 keys.
Replacement Notes
NATS / I-Key system. CONSULT-III Plus required for key programming and module replacement. Security pin required; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Unibody crossover construction; verify first-generation, Rogue Select, or T32 build by VIN
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Infotainment
- Nissan AM/FM stereo; CD player; Bluetooth (select trims); Aux input
- OTA Capable
- No
- ECU Unlock Supported
- No
- Custom Programming
- Yes
WHAT WE RESOLVE
1st Gen S35 (2008-2013) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Rear View Camera (2008-2009, 2012-2013) and Rear View Camera (2010-2011). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Unit (2008, 2013), SRS Control Unit (2008), and SRS Control Unit (2009-2012). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 4 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Nissan Rogue (2008-2013) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Nissan Rogue (2008-2013). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Nissan Rogue (2008-2013)?
The Nissan Rogue (2008-2013) generation currently shows 17 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Unit (2008, 2013), SRS Control Unit (2008), and SRS Control Unit (2009-2012). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: K8510-JM12A (2008, 2013) - confirm for your exact year/VIN.
Does Nissan Rogue (2008-2013) need ADAS calibration after glass or collision work?
The merged generation data documents 2 ADAS systems, including Rear View Camera (2008-2009, 2012-2013) and Rear View Camera (2010-2011). Calibration triggers include ECM Replacement and ABS/VDC Module Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Nissan Rogue (2008-2013)?
Yes. The generation data includes 3 SRS records, including SRS Control Unit (2008, 2013), SRS Control Unit (2008), and SRS Control Unit (2009-2012). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: K8510-JM12A (2008, 2013) - confirm for your exact year/VIN.
Do all Nissan Rogue (2008-2013) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2008-2013; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Nissan Rogue (2008-2013)?
Yes, where the VIN and security workflow support it. The generation data includes 4 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Nissan Rogue (2008-2013)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Nissan Rogue (2008-2013) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.