Mercedes-Benz Driving Assistance Package Plus: Active Distance DISTRONIC, Active
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2024-2026 Mercedes-Benz CLE Generation Guide
Mercedes-Benz CLE 1st Gen C236/A236 (2024-2026) ADAS Calibration & Module Programming
Covers model years 2024-2026 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Mercedes-Benz CLE built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform Mercedes-Benz MRA2 (replaces C-class coupe/cabriolet and E-class coupe)
- CAN Architecture HS-CAN + CANFD; Mercedes-Benz network; OBD2 DLC Pin 6/14
- Security Mercedes-Benz Keyless-Go PEPS; Digital Key NFC; AES-128 rolling
The ADAS, module, and security rows below are consolidated across the full 2024-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2024-2026”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2024 Mercedes Benz Cle. On this vehicle we cover documented systems include Forward Camera (Mobileye EyeQ5), Forward Radar (Continental ARS540), and Blind Spot Monitor - Left Rear Radar (Aptiv SRR), this Mercedes-Benz MRA2 (replaces C-class coupe/cabriolet and E-class coupe) platform vehicle, Mercedes-Benz EIS/ESL Gen 4-5; PEPS immobilizer support, OEM-gateway-subscription work handled on our side. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
Mercedes-Benz MRA2 (replaces C-class coupe/cabriolet and E-class coupe)
Production
2024-present
Trim Levels
Trim variants may affect available driver-assist features. AMG and Maybach trims may require additional XENTRY modules.
Drivetrain
RWD / AWD
Engine
-
CAN Speed
HS-CAN + CANFD; Mercedes-Benz network; OBD2 DLC Pin 6/14
Feature availability 3
Immobilizer: Mercedes-Benz EIS/ESL Gen 4-5
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: Mercedes-Benz MRA2 (replaces C-class coupe/cabriolet and E-c
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Mercedes XENTRY Diagnosis / Mercedes DAS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required Security gateway access required No practical workaround
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses HS-CAN + CANFD; Mercedes-Benz network; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps). The gateway requires registered tool access.
- CAN
- HS-CAN + CANFD; Mercedes-Benz network; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
- Gateway
- Mercedes-Benz diagnostic firewall / central gateway
- Subscription
- Yes
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - mercedes-benz not in openpilot support tree
Not in openpilot support tree as of April 2026. Mercedes-Benz not in openpilot support tree. Sprinter and passenger cars not ported.
Generation service summary for Mercedes-Benz CLE 1st Gen C236/A236 (2024-2026)
Generation coverage
This page consolidates Mercedes-Benz CLE service data for 2024-2026 across 3 model years; 3 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 18 system records, including Forward Camera (Mobileye EyeQ5) (2024), Forward Radar (Continental ARS540) (2024), Blind Spot Monitor - Left Rear Radar (Aptiv SRR) (2024), and Blind Spot Monitor - Right Rear Radar (Aptiv SRR) (2024). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 8 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 56 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 11 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Mercedes-Benz CLE 2024-2026 span, with exact-year validation before service.
Get a quoteDo I need calibration?
Windshield Replacement 4
Stereo Multi-Purpose Camera (MPC)
2024-2026required
XENTRY static camera calibration required using MB target board. SGW active - online XENTRY access mandatory. MB-approved glass only. Confirm no air gaps at camera mount after reinstall.
Active Brake Assist
2024-2026required
XENTRY static camera calibration required using MB target board. SGW active - online XENTRY access mandatory. MB-approved glass only. Confirm no air gaps at camera mount after reinstall.
Lane Keeping Assist
2024-2026required
XENTRY static camera calibration required using MB target board. SGW active - online XENTRY access mandatory. MB-approved glass only. Confirm no air gaps at camera mount after reinstall.
Attention Assist
2024-2026required
XENTRY static camera calibration required using MB target board. SGW active - online XENTRY access mandatory. MB-approved glass only. Confirm no air gaps at camera mount after reinstall.
Front Bumper Repair or Replacement 4
Front Long-Range Radar
2024-2026required
Radar static alignment via XENTRY. Vehicle at curb weight on level surface. Inspect radar bracket for deformation. Module coding confirmation required. SGW active - online XENTRY access mandatory.
ACC
2024-2026required
Radar static alignment via XENTRY. Vehicle at curb weight on level surface. Inspect radar bracket for deformation. Module coding confirmation required. SGW active - online XENTRY access mandatory.
Active Brake Assist
2024-2026required
Radar static alignment via XENTRY. Vehicle at curb weight on level surface. Inspect radar bracket for deformation. Module coding confirmation required. SGW active - online XENTRY access mandatory.
Pre-Safe
2024-2026required
Radar static alignment via XENTRY. Vehicle at curb weight on level surface. Inspect radar bracket for deformation. Module coding confirmation required. SGW active - online XENTRY access mandatory.
Rear Bumper Repair or Replacement 3
Blind Spot Assist
2024-2026required
BSD rear radar modules require module coding confirmation after bumper reinstall. Rear Parktronic sensor resistance check recommended. XENTRY DTC scan after reassembly.
Rear Cross-Traffic Alert
2024-2026required
BSD rear radar modules require module coding confirmation after bumper reinstall. Rear Parktronic sensor resistance check recommended. XENTRY DTC scan after reassembly.
Parktronic rear sensors
2024-2026required
BSD rear radar modules require module coding confirmation after bumper reinstall. Rear Parktronic sensor resistance check recommended. XENTRY DTC scan after reassembly.
Any Collision 5
ACU
2024-2026required
Full XENTRY scan mandatory. ACU replace-only if crash data present - no clear available. Camera and radar alignment required if front end disturbed. SGW active - online XENTRY mandatory.
front camera
2024-2026required
Full XENTRY scan mandatory. ACU replace-only if crash data present - no clear available. Camera and radar alignment required if front end disturbed. SGW active - online XENTRY mandatory.
front radar
2024-2026required
Full XENTRY scan mandatory. ACU replace-only if crash data present - no clear available. Camera and radar alignment required if front end disturbed. SGW active - online XENTRY mandatory.
BSD radars
2024-2026required
Full XENTRY scan mandatory. ACU replace-only if crash data present - no clear available. Camera and radar alignment required if front end disturbed. SGW active - online XENTRY mandatory.
all deployed airbag and pretensioner circuits
2024-2026required
Full XENTRY scan mandatory. ACU replace-only if crash data present - no clear available. Camera and radar alignment required if front end disturbed. SGW active - online XENTRY mandatory.
Any Module Replacement (SAM, EIS, ECM, TCM) 7
All SCN-coded modules - FSAM
2024-2026required
Online SCN coding required using XENTRY for all replaced modules. SGW active - MB server authorization mandatory. EIS replacement triggers mandatory EIS/ISM/ECM synchronization. Battery charger required during programming.
RSAM
2024-2026required
Online SCN coding required using XENTRY for all replaced modules. SGW active - MB server authorization mandatory. EIS replacement triggers mandatory EIS/ISM/ECM synchronization. Battery charger required during programming.
EIS
2024-2026required
Online SCN coding required using XENTRY for all replaced modules. SGW active - MB server authorization mandatory. EIS replacement triggers mandatory EIS/ISM/ECM synchronization. Battery charger required during programming.
ISM
2024-2026required
Online SCN coding required using XENTRY for all replaced modules. SGW active - MB server authorization mandatory. EIS replacement triggers mandatory EIS/ISM/ECM synchronization. Battery charger required during programming.
ECM
2024-2026required
Online SCN coding required using XENTRY for all replaced modules. SGW active - MB server authorization mandatory. EIS replacement triggers mandatory EIS/ISM/ECM synchronization. Battery charger required during programming.
TCM
2024-2026required
Online SCN coding required using XENTRY for all replaced modules. SGW active - MB server authorization mandatory. EIS replacement triggers mandatory EIS/ISM/ECM synchronization. Battery charger required during programming.
ACU
2024-2026required
Online SCN coding required using XENTRY for all replaced modules. SGW active - MB server authorization mandatory. EIS replacement triggers mandatory EIS/ISM/ECM synchronization. Battery charger required during programming.
Wheel Alignment / Suspension Work 2
ESP / ABS (steering angle sensor)
2024-2026recommended
Steering angle sensor calibration via XENTRY after any alignment or suspension component replacement. If vehicle height changed (air suspension), radar aim must be re-verified.
ACC radar aim
2024-2026recommended
Steering angle sensor calibration via XENTRY after any alignment or suspension component replacement. If vehicle height changed (air suspension), radar aim must be re-verified.
Forward Radar Replacement 1
2024-2026
Yes
Radar module replacement requires alignment/calibration using XENTRY. SGW active - online XENTRY required.
BSM Sensor Replacement 1
2024-2026
Yes
Blind spot monitoring sensor replacement requires calibration using XENTRY.
Year-by-year details
| Year | Trim notes |
|---|---|
| 2024 | Trim variants may affect available driver-assist features. AMG and Maybach trims may require additional XENTRY modules. |
| 2025 | Trim variants may affect available driver-assist features. AMG and Maybach trims may require additional XENTRY modules. |
| 2026 | Trim variants may affect available driver-assist features. AMG and Maybach trims may require additional XENTRY modules. |
18 ADAS systems documented across 2024-2026. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Mercedes-Benz Driving Assistance Package Plus: Active Distance DISTRONIC, Active Steering Assist, Lane Change Assist, Active Emergency Stop Assist, PRE-SAFE, Active Parking Assist
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Mobileye EyeQ5) 2024 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS540) 2024 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Rear Radar (Aptiv SRR) 2024 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Rear Radar (Aptiv SRR) 2024 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2024 | Rear Camera | Camera | Static | YES | - | |
| PDC Sensors - Front & Rear (Park Distance Control) 2024 | Parking Sensor | sensor | None | YES | - | |
| Forward Camera (Mobileye EyeQ5) 2025 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS540) 2025 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Rear Radar (Aptiv SRR) 2025 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Rear Radar (Aptiv SRR) 2025 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2025 | Rear Camera | Camera | Static | YES | - | |
| PDC Sensors - Front & Rear (Park Distance Control) 2025 | Parking Sensor | sensor | None | YES | - | |
| Forward Camera (Mobileye EyeQ5) 2026 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS540) 2026 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Rear Radar (Aptiv SRR) 2026 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Rear Radar (Aptiv SRR) 2026 | Side Radar | Radar | Static + Dynamic | YES | - | |
| Rear View Camera (RVC) 2026 | Rear Camera | Camera | Static | YES | - | |
| PDC Sensors - Front & Rear (Park Distance Control) 2026 | Parking Sensor | sensor | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Stereo Multi-Purpose Camera (MPC), Active Brake Assist, Lane Keeping Assist, Attention Assist
XENTRY static camera calibration required using MB target board. SGW active - online XENTRY access mandatory. MB-approved glass only. Confirm no air gaps at camera mount after reinstall.
Front Bumper Repair or Replacement Affected: Front Long-Range Radar, ACC, Active Brake Assist, Pre-Safe
Radar static alignment via XENTRY. Vehicle at curb weight on level surface. Inspect radar bracket for deformation. Module coding confirmation required. SGW active - online XENTRY access mandatory.
Rear Bumper Repair or Replacement Affected: Blind Spot Assist, Rear Cross-Traffic Alert, Parktronic rear sensors
BSD rear radar modules require module coding confirmation after bumper reinstall. Rear Parktronic sensor resistance check recommended. XENTRY DTC scan after reassembly.
Any Collision Affected: ACU, front camera, front radar, BSD radars, all deployed airbag and pretensioner circuits
Full XENTRY scan mandatory. ACU replace-only if crash data present - no clear available. Camera and radar alignment required if front end disturbed. SGW active - online XENTRY mandatory.
Any Module Replacement (SAM, EIS, ECM, TCM) Affected: All SCN-coded modules - FSAM, RSAM, EIS, ISM, ECM, TCM, ACU
Online SCN coding required using XENTRY for all replaced modules. SGW active - MB server authorization mandatory. EIS replacement triggers mandatory EIS/ISM/ECM synchronization. Battery charger required during programming.
Wheel Alignment / Suspension Work Affected: ESP / ABS (steering angle sensor), ACC radar aim
Steering angle sensor calibration via XENTRY after any alignment or suspension component replacement. If vehicle height changed (air suspension), radar aim must be re-verified.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using XENTRY. SGW active - online XENTRY required.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using XENTRY.
Modules we program on this generation
56 documented Mercedes-Benz CLE modules across 2024-2026. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
SRS Control Unit x31
MOUNT1039880111 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- MOUNT1039880111
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
HOSE1121400312 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- HOSE1121400312
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
HOSE1170940382 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- HOSE1170940382
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
HOSE400SE400SEL500SELS420S5001190901582 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- HOSE400SE400SEL500SELS420S5001190901582
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
HOSE500SLSL5001190940082 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- HOSE500SLSL5001190940082
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
HOSE500SLSL5001190940182 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- HOSE500SLSL5001190940182
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
HOSE500SELS420S500400SE400SEL1190947382 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- HOSE500SELS420S500400SE400SEL1190947382
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
MOUNT240D300CD300D300SD300TD61798801111 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- MOUNT240D300CD300D300SD300TD61798801111
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
MOUNT6159880011 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- MOUNT6159880011
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
1020940060 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1020940060
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
CLIPC3001120940041 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- CLIPC3001120940041
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
1020940072 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1020940072
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
2720940080 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 2720940080
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
2780904882 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 2780904882
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
1130942682 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1130942682
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
1130942782 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1130942782
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
1130940082 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1130940082
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
1120943482 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1120943482
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
2710900901 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 2710900901
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
2045840047 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 2045840047
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
1120943582 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1120943582
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
1130942182 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1130942182
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
1130942282 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1130942282
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
1130940882 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1130940882
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
HOSEVAICO2780902082 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- HOSEVAICO2780902082
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
2515051561 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 2515051561
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
2515051661 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 2515051661
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
01141850 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 01141850
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
2730900901 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 2730900901
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
2780904X82 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- 2780904X82
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
PARTS0010942280 Dealer security required Under center console
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- PARTS0010942280
- LOCATION
- Under center console
- MFG
- Bosch
- NOTES
- Requires Xentry/DAS or compatible J2534 tool. SCN coding required online. Battery disconnect and 60-second wait before removal. SRS variant coding required.
ECU MODULES
ECU Modules
Engine Control Module (ECM) Dealer security required
security_type indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- EIS/ESL (AES-128 / VVDI)
- CODING
- Yes
- CLONE
- No
- NOTES
- ECM programming requires VIN encoding and security seed/key exchange via our diagnostic software. Online server authentication required. Cloning not supported on 2018+ VIN-locked units.
Transmission Control Module (TCM) Dealer security required
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- EIS/ESL (AES-128 / VVDI)
- CODING
- Yes
- CLONE
- No
- NOTES
- TCM requires shift-point calibration and VIN adaptation after replacement via our diagnostic software. Cloning not supported.
Body Control Module (BCM) Dealer security required
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PROTOCOL
- OBD
- SECURITY
- EIS/ESL (AES-128 / VVDI)
- CODING
- Yes
- CLONE
- No
- NOTES
- BCM requires coding to vehicle VIN after replacement. Security gateway access required on 2018+ models. All comfort/convenience modules must be re-synced via our diagnostic software.
BCM MODULES
BCM Modules
Front SAM (Signal Acquisition Module) Dealer security required ~A236-900
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Donor must match part family ~A236-900 - requires cloning
Always match the full part number before buying a used module.
- PART
- ~A236-900
- SECURITY
- SCN Coding
- CODING
- Yes
- CLONE
- No
- NOTES
- XENTRY/DAS module coding mandatory after replacement. SGW (Security Gateway) active - online XENTRY access required. Front SAM controls exterior lighting, wiper, horn, battery management sensor, comfort opening. VIN-coded via SCN - no clone supported.
Rear SAM (Signal Acquisition Module) Dealer security required ~A236-900
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- ~A236-900
- SECURITY
- SCN Coding
- CODING
- Yes
- CLONE
- No
- NOTES
- XENTRY/DAS module coding mandatory. SGW active - online XENTRY server authorization required. Rear SAM controls tail lamps, fuel pump relay, rear wiper, trunk lighting. No aftermarket substitute for module coding.
Electronic Ignition Switch (EIS) Dealer security required ~A236-905
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- ~A236-905
- SECURITY
- mb_eis
- CODING
- Yes
- CLONE
- No
- NOTES
- EIS is the core of MB security system. SGW active - XENTRY + MB server online authorization mandatory. EIS must be synchronized with ECM and ISM. No 3rd party tool supports EIS programming on SGW vehicles. AKL requires MB dealer authorization.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 9G-TRONIC 9-Speed Auto Verify by VIN 2024-2025 A0009062
_years covers only 2024-2025 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025
Always match the full part number before buying a used module.
- PART
- A0009062
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental TC297
- NOTES
- Requires SCN coding via XENTRY, ATF spec MB236.14, transmission adaptation required after programming
TCU - 9G-TRONIC+ 9-Speed Auto AMG Verify by VIN 2024-2025 A0009062
_years covers only 2024-2025 for this generation
Used/donor module guide
Compatible donor years: 2024, 2025
Always match the full part number before buying a used module.
- PART
- A0009062
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental TC297
- NOTES
- AMG specific calibration, requires SCN coding via XENTRY, ATF spec MB236.14, performance shift mapping
TCU - 9G-TRONIC 9-Speed Auto Verify by VIN 2026 A0009007
_years covers only 2026 for this generation
Used/donor module guide
Compatible donor years: 2026
Donor must match part family A0009007 - requires cloning
Always match the full part number before buying a used module.
- PART
- A0009007
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Continental TC1797
- NOTES
- Requires SCN coding with Mercedes XENTRY, transmission adaptation required, MB ATF 134 FE fluid spec
TCU - AMG SPEEDSHIFT DCT 8G-DCT Verify by VIN 2026 A1769001
_years covers only 2026 for this generation
Used/donor module guide
Compatible donor years: 2026
Always match the full part number before buying a used module.
- PART
- A1769001
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental TC1797
- NOTES
- AMG variant requires dealer programming, clutch adaptation mandatory, special AMG ATF required
ABS / BRAKE MODULES
ABS / Brake Modules
ESP Module (Continental ATE / Bosch) Dealer security required ~A236-431
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- PART
- ~A236-431
- CLONE
- No
- NOTES
- XENTRY/DAS module coding required after replacement. SGW active - online XENTRY access mandatory. Brake bleed cycle via XENTRY. Steering angle sensor calibration required - XENTRY automated routine. No aftermarket coding substitute.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) Dealer security required A 236 900 03 01
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Donor must match part family A 236 900 03 01 - requires cloning
Always match the full part number before buying a used module.
- PART
- A 236 900 03 01
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Dealer security required A 236 900 04 01
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Donor must match part family A 236 900 04 01 - requires cloning
Always match the full part number before buying a used module.
- PART
- A 236 900 04 01
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS) Dealer security required
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (SRM clock spring)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
MBUX Superscreen 14.4" + 14.4" passenger screen Dealer security required
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Programming required after replacement. Verify software version compatibility before install.
Remote Start Dealer security required
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Factory remote start. BCM configuration required after replacement on equipped vehicles.
Telematics Control Unit (TCU) Dealer security required
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Cellular connectivity module. Subscription activation required post-replacement. VIN registration with manufacturer.
11 gateway, immobilizer, and security items documented across 2024-2026.
GATEWAY / SECURITY MODULES
Gateway / Security Modules
Central Gateway Module x8
Part 1 Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3373
- NOTES
- Compatibility label: S400 W221. Door control box | Notes: Read/Write
Part 2 Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3372
- NOTES
- Compatibility label: A164. KG intelligent computer | Notes: 315 MHz | KG intelligent computer | Notes: 433 MHz
Part 3 Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3372
- NOTES
- Compatibility label: A166. KG intelligent computer | Notes: 315 MHz
Part 4 Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3372
- NOTES
- Compatibility label: A211. KG intelligent computer | Notes: 433 MHz
Part 5 Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3624
- NOTES
- Compatibility label: A212. KG intelligent computer | Notes: 315 MHz
Part 6 Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3624
- NOTES
- Compatibility label: C200 A212. KG intelligent computer | Notes: Read/Write
Part 7 Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- MFG
- Renesas
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3372
- NOTES
- KG intelligent computer | Notes: Read/Write
Part 8 Dealer security required
vin_locked indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- SECURITY
- VIN-locked (UDS)
- VIN LOCKED
- Yes
- CODING
- Yes
- CHIP/MCU
- D70F3372(read-write)
- NOTES
- Compatibility label: General model. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Mercedes-Benz EIS/ESL Gen 4-5; PEPS
- Add Key Yes - XENTRY
- All Keys Lost Yes - XENTRY
Mercedes-Benz Keyless-Go PEPS; Digital Key NFC; AES-128 rolling
IMMOBILIZER MODULES
Immobilizer Modules
Module 1 Dealer security required
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- EIS/ESL AES Gen4 system. AES encryption limits PIN extraction. Specialist equipment required for key programming.
KEY & FOB TYPES
Key & Fob Types
Smart Key (proximity) Dealer security required
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- AES-128 Gen4 smart key. Specialist bench programming required. Limited key programming options without dealer assistance.
Smart Key (proximity) Dealer security required
gateway_type and gateway_subscription_required require registered access
Used/donor module guide
Compatible donor years: 2024, 2025, 2026
Always match the full part number before buying a used module.
- NOTES
- Spare/second key programming. Use the same procedure as the primary key. Verify all keys start the vehicle after programming.
Replacement Notes
Mercedes-Benz EIS/ESL Gen 4-5; PEPS system. XENTRY/DAS required for key programming and module replacement. Pin extraction: limited; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- High-strength steel unibody with aluminum hood/trunk; coupe and cabriolet variants
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN + CANFD; Mercedes-Benz network; OBD2 DLC Pin 6/14
- Infotainment
- MBUX Superscreen 14.4" + 14.4" passenger screen; OTA Mercedes me
- OTA Capable
- Yes
- Gateway Type
- Mercedes-Benz diagnostic firewall / central gateway
- Gateway Subscription
- Yes
- Gateway Bypass Method
- XENTRY/Daimler authorized diagnostic access
- ECU Unlock Supported
- No
- Custom Programming
- Yes
WHAT WE RESOLVE
1st Gen C236/A236 (2024-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Mobileye EyeQ5) (2024), Forward Radar (Continental ARS540) (2024), Blind Spot Monitor - Left Rear Radar (Aptiv SRR) (2024), and Blind Spot Monitor - Right Rear Radar (Aptiv SRR) (2024). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Unit. Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 11 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Mercedes-Benz CLE (2024-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Mercedes-Benz CLE (2024-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Mercedes-Benz CLE (2024-2026)?
The Mercedes-Benz CLE (2024-2026) generation currently shows 42 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Unit. Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: MOUNT1039880111 - confirm for your exact year/VIN.
Does Mercedes-Benz CLE (2024-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 18 ADAS systems, including Forward Camera (Mobileye EyeQ5) (2024), Forward Radar (Continental ARS540) (2024), Blind Spot Monitor - Left Rear Radar (Aptiv SRR) (2024), Blind Spot Monitor - Right Rear Radar (Aptiv SRR) (2024), and Rear View Camera (RVC) (2024). Calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and Any Collision. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Mercedes-Benz CLE (2024-2026)?
Yes. The generation data includes 31 SRS records, including SRS Control Unit. Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: MOUNT1039880111 - confirm for your exact year/VIN.
Do all Mercedes-Benz CLE (2024-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2024-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Mercedes-Benz CLE (2024-2026)?
Yes, where the VIN and security workflow support it. The generation data includes 11 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Mercedes-Benz CLE (2024-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Mercedes-Benz CLE (2024-2026) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
More CLE generations
1st Gen C236/A236 2024-2026 You are here