VIN / Build Split
VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2020 Honda Insight Supported Services
2020 Honda Insight
ADAS calibration, module programming, and security relearns
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Technical snapshot
- Platform Honda ZE4 (3rd Gen Insight)
- CAN Architecture Honda F-CAN (500 kbps) + B-CAN (125 kbps) + IMA HV CAN
- Security Honda Smart Entry - DST-AES; no OBD pin; AKL requires Honda iN + HDS; max 8 keys
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Honda Insight. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera, this Honda ZE4 (3rd Gen Insight) platform vehicle, Honda DST-AES Smart Entry (ZE4 Insight) immobilizer support, Honda Display Audio infotainment programming. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
Honda ZE4 (3rd Gen Insight)
Production
2019-2022
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
FWD
Engine
-
CAN Speed
Honda F-CAN (500 kbps) + B-CAN (125 kbps) + IMA HV CAN
YEAR-SPECIFIC NOTES
Infotainment
Honda Display Audio
Exact-year service summary for 2020 Honda Insight
ADAS coverage
This 2020 Honda Insight page documents 3 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera.
View ADAS dataCalibration triggers
Documented calibration triggers include Windshield Replacement, Front Bumper Repair, EPS Replacement, and IMA / HV Work. Use the ADAS tab for the full trigger list.
View triggersTarget setup planning
Approved target-planning data maps this vehicle family to LAM01-04-L&LAM01-04-R. Primary Acura/Honda static target set for FCW/LDW and LKAS forward-camera calibration planning. Confirm VIN, trim, DTCs, sensor part number, and scan-tool procedure before setup.
View ADAS dataProgrammable modules
This page indexes 14 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 2 gateway, immobilizer, or key-security records for this 2020 Honda Insight.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2020 Honda Insight using the documented systems and module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Honda Sensing standard ALL trims: Collision Mitigation Braking System/Automatic - Standard; Immobilizer: Honda DST-AES Smart Entry (ZE4 Insight) - Standard; Platform: Honda ZE4 (3rd Gen Insight) - Confirmed
Driver-assist suite
Honda Sensing standard ALL trims: Collision Mitigation Braking System/Automatic Emergency Braking, Lane Keeping Assist System, LDWS, Adaptive Cruise Control, Road Departure Mitigation
VIN and build split
VIN pos 4-8 identifies model/body/transmission/engine. Honda WMI: 1HG, 2HG, 5J6. Position 4-5 = model code. Position 10 = model year code.
Infotainment context
Honda Display Audio; Honda Display Audio 8" (EX+); CarPlay/Android Auto; Navigation on Touring
Network and access
CAN: Honda F-CAN (500 kbps) + B-CAN (125 kbps) + IMA HV CAN
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Honda HDS / i-HDS / Honda Diagnostic Software
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2020 Honda Insight. Counts reflect modules our techs have programmed or calibrated on this exact platform.
ADAS Calibration
3 modules documented
Forward camera, radar, surround-view and lane-keep recalibration after windshield, suspension or fascia work.
Open ADAS tabEngine / ECU Programming
3 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabBCM / Body Programming
2 modules documented
Body control module, gateway and accessory programming. Includes feature-bit reconfiguration.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabSRS / Airbag Reset
2 modules documented
Crash-data clear, hard-code reset and replacement airbag module configuration.
Open Modules tabABS / Brake Module
1 module documented
ABS / EBCM bleed support, replacement module coding and yaw-rate sensor calibration.
Open Modules tabKey Security & Immobilizer
1 module documented
Immobilizer modules, key/fob types, add-key + all-keys-lost (AKL) capability and security overview.
Open Security tabIPC, SAS & Other Modules
2 modules documented
Instrument cluster cloning, steering angle sensor calibration and other supporting modules.
Open Modules tabConnectivity & Accessories
2 modules documented
Infotainment radio, surround view, remote start, trailer brake controller and other equipped systems.
Open Modules tabRecalibration Triggers
7 modules documented
Service events that require ADAS recalibration on this vehicle. Tap to see what triggers what.
Open ADAS tabNeed something not listed? Most undocumented modules can still be programmed.
Get a QuoteFeature availability 3
Honda Sensing standard ALL trims: Collision Mitigation Braking System/Automatic
StandardCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Immobilizer: Honda DST-AES Smart Entry (ZE4 Insight)
StandardKey programming requires manufacturer-level tool access.
Platform: Honda ZE4 (3rd Gen Insight)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Honda Insight issues we resolve on this platform: Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - Honda ZE4 (3rd Gen Insight) platform uses Honda F-CAN (500 kbps) + B-CAN (125 kbps) + IMA HV CAN. Key programming and immobilizer faults - Honda DST-AES Smart Entry (ZE4 Insight) immobilizer; all-keys-lost supported.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Honda Sensing standard ALL trims: Collision Mitigation Braking System/Automatic Emergency Braking, Lane Keeping Assist System, LDWS, Adaptive Cruise Control, Road Departure Mitigation
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | 36160-TXM-A01 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | 36802-TXM-A01 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Rear View Camera | Rear Camera | Camera | Static | YES | 39530-TXM |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Honda Sensing Camera (all trims)
HDS static cal. ZE4 Insight procedure. Level surface. All Sensing DTCs clear.
Front Bumper Repair Affected: Forward Radar
HDS radar boresight. Bumper installed before cal.
EPS Replacement Affected: EPS, LKAS
HDS EPS zero cal. Verify LKAS.
IMA / HV Work Affected: PCM/MCM, IMA battery, motors
HV de-energization per WSM. HV PPE. HDS IMA cal after PCM replacement.
Any Collision Affected: SRS ECU, Sensing, IMA, deployed airbags
Full HDS scan. SRS deployment = replace. Check IMA system.
Forward Camera Replacement
Camera module replacement requires full recalibration using HDS.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using HDS.
SRS MODULES
SRS Modules
SRS Control Unit 77960-TM8-A011-M2 (150300 1652)
- PART
- 77960-TM8-A011-M2 (150300 1652)
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 93C86
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
SRS Control Unit 77960-TXM-A230-M2
- PART
- 77960-TXM-A230-M2
- LOCATION
- Under center console
- MFG
- Denso
- CHIP/MCU
- 93C86
- NOTES
- Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
ECU MODULES
ECU Modules
PCM/MCM - 1.5L i-VTEC IMA Hybrid 37820-6L8
- PART
- 37820-6L8
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Renesas (Honda IMA PCM)
- NOTES
- IMA hybrid PCM manages 1.5L i-VTEC + dual electric motor assist + Li-ion HV battery. HDS/i-HDS Programming Port flash programming. VIN registration + IMMO seed write. HV de-energization per WSM before HV work. HV-rated PPE mandatory. Verify IMA ready light and HV SOC normal post-programming.
TCM - E-CVT (IMA) 28100-TXM
- PART
- 28100-TXM
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas
- NOTES
- IMA-integrated E-CVT TCM. HDS programming after replacement. Adaptive relearn procedure via HDS. Honda CVT fluid.
Electric Power Steering Control Unit (EPS) 39980-TXM-A01 (VERIFY VIA HONDA IN)
- PART
- 39980-TXM-A01 (VERIFY VIA HONDA IN)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Renesas
- NOTES
- HDS EPS zero calibration after replacement. Level surface, steering centered. LKAS depends on EPS torque - verify Honda Sensing after EPS replacement.
BCM MODULES
BCM Modules
Body Control Module (BCM) 38809-TXM-A01 (VERIFY VIA HONDA IN)
- PART
- 38809-TXM-A01 (VERIFY VIA HONDA IN)
- SECURITY
- EEPROM
- CODING
- Yes
- CLONE
- Yes
- NOTES
- HDS BCM programming + VIN registration.
Keyless Access Control Unit 35100-TXM-A01 (VERIFY VIA HONDA IN)
- PART
- 35100-TXM-A01 (VERIFY VIA HONDA IN)
- SECURITY
- DST-AES
- CODING
- Yes
- CLONE
- No
- NOTES
- Honda iN + HDS. All keys erased. Max 8.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
N/A - Single Speed / No TCU
- PROTOCOL
- Virgin Flash
- CODING
- No
- CLONE
- No
- CHIP/MCU
- N/A
- NOTES
- Hybrid system uses single-speed eCVT transmission with integrated motor control via PCM/hybrid control unit. No separate TCU present.
N/A - Single Speed / No TCU
- PROTOCOL
- Virgin
- CODING
- No
- CLONE
- No
- CHIP/MCU
- N/A
- NOTES
- Hybrid system uses single-speed eCVT transmission with integrated motor control via PCM/hybrid control unit. No separate TCU present.
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/VSA Modulator-Control Unit 57110-TXM-A01 (VERIFY VIA HONDA IN)
- PART
- 57110-TXM-A01 (VERIFY VIA HONDA IN)
- CLONE
- Yes
- NOTES
- HDS ABS/VSA init. Power bleed via HDS. SAS zero-point cal post-replacement.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) 78100-TXM-A03
- PART
- 78100-TXM-A03
- CLONE
- Yes
- NOTES
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)
- CODING
- Yes
- NOTES
- INTEGRATED (cable reel 77900 family)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Display Audio 8" 39100-TXM-A01 (VERIFY VIA HONDA IN)
- PART
- 39100-TXM-A01 (VERIFY VIA HONDA IN)
- NOTES
- HDS diagnostic + VIN registration.
IPC (Instrument Panel Cluster) 78100-TXM-A01 (VERIFY VIA HONDA IN)
- PART
- 78100-TXM-A01 (VERIFY VIA HONDA IN)
- NOTES
- HDS IPC programming + VIN registration. Verify IMA display.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Honda DST-AES Smart Entry (ZE4 Insight)
- Add Key Yes
- All Keys Lost Yes
Honda Smart Entry - DST-AES; no OBD pin; AKL requires Honda iN + HDS; max 8 keys
IMMOBILIZER MODULES
Immobilizer Modules
Smart Entry (DST-AES)
- SECURITY
- DST-AES
- NOTES
- No OBD pin. Honda iN dealer auth + HDS. PCM: IMMO seed write. Max 8 keys.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob 72147-TXM-A01 (VERIFY VIA HONDA IN)
- PART
- 72147-TXM-A01 (VERIFY VIA HONDA IN)
- NOTES
- DST-AES. Honda iN + HDS. Min 2 for add-key. AKL requires Honda iN auth. Max 8 keys.
Replacement Notes
Honda DST-AES Smart Entry (ZE4 Insight) system. HDS (Honda Diagnostic System) required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Honda ACE Unibody - Advanced High-Strength Steel
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Honda F-CAN (500 kbps) + B-CAN (125 kbps) + IMA HV CAN
- Infotainment
- Honda Display Audio 8" (EX+); CarPlay/Android Auto; Navigation on Touring
- OTA Capable
- No
- Infotainment Name
- Honda Display Audio
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2020 - 1.3L Hybrid (LDA3).
Confirm the exact engine, ECU, and any prerequisite access method before service.
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Officially supported (openpilot master)
- Package
- Honda Sensing
- Hardware
- Comma 3X + Honda Bosch A harness
- Harness
- Honda Bosch A Harness
Discontinued after 2022.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2020 Honda Insight?
ADAS calibration pricing for a 2020 Honda Insight depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2020 Honda Insight?
Yes. The 2020 Honda Insight uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 77960-TM8-A011-M2 (150300 1652). Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2020 Honda Insight?
After windshield replacement on a 2020 Honda Insight, Forward Camera (Monocular), Forward Radar (77GHz), and Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2020 Honda Insight module service take?
Most 2020 Honda Insight onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 12 programmable modules documented in our database (3 ECU, 2 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2020 Honda Insight on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2020 Honda Insight. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2020 Honda Insight programming?
Every programming, cloning, and calibration job on the 2020 Honda Insight is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2020 Honda Insight with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2020 Honda Insight. Immobilizer generation on this platform: Honda DST-AES Smart Entry (ZE4 Insight). Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2020 Honda Insight can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2020 Honda Insight. For this vehicle our database documents:
- 3 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
- 2 body control (BCM and related)
- 1 ABS / brake control (EBCM)
- 1 immobilizer / security
- 1 key & fob
- 1 instrument cluster (IPC)
- 1 steering angle sensor (SAS)
- 3 ADAS module
Infotainment on this platform: Honda Display Audio. Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2020 Honda Insight covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ADAS Module Part Numbers
- 36160-TXM-A01, 36802-TXM-A01, 39530-TXM
- ECU / PCM Part Numbers
- 37820-6L8, MCM - 1.5L I-VTEC IMA HYBRID
- BCM / Body Module Part Numbers
- 38809-TXM-A01 (VERIFY VIA HONDA IN), 35100-TXM-A01 (VERIFY VIA HONDA IN)
- SRS / Airbag Module Part Numbers
- 77960-TM8-A011-M2 (150300 1652), 77960-TXM-A230-M2
- ABS / EBCM Part Numbers
- 57110-TXM-A01, 3RD GEN INSIGHT ZE4 HYBRID
- Instrument Cluster (IPC) Part Numbers
- 78100-TXM-A03
- Steering Angle Sensor (SAS) Part Numbers
- INTEGRATED (CABLE REEL 77900 FAMILY)
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2020 Honda Insight
These vehicles use one or more of the same replacement modules indexed for this vehicle.