VIN / Build Split
Verify exact Focus trim, drivetrain, engine, and installed safety systems by VIN before service.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2010 Ford Focus Supported Services
2010 Ford Focus
ADAS calibration, module programming, and security relearns
Focus-specific trim/service details require VIN and source review.
Technical snapshot
- Platform -
- CAN Architecture -
- Security -
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2010 Ford Focus. On this vehicle we cover every programmable module the platform ships with. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
-
Production
2010-2018
Trim Levels
Focus-specific trim/service details require VIN and source review.
Drivetrain
FWD
Engine
-
CAN Speed
-
YEAR-SPECIFIC NOTES
Exact-year service summary for 2010 Ford Focus
Electronic systems coverage
This 2010 Ford Focus page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systemsProgrammable modules
This page indexes 8 programmable module records across ECU and TCU/TCM coverage.
View modulesGateway and security
Gateway and immobilizer access is checked by VIN before service.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2010 Ford Focus using the documented module data on this page.
Choose a sectionWhat changes on this exact year
VIN and build split
Verify exact Focus trim, drivetrain, engine, and installed safety systems by VIN before service.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Ford IDS / Ford FDRS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Ford-family configuration and service functions
FORScan
Useful for supported configuration and diagnostics; factory programming still moves to OEM software when required.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2010 Ford Focus. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
7 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabTCU / Transmission
1 module documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
WHAT WE RESOLVE
Common issues on this vehicle
Common Ford Focus issues we resolve on this platform: Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - standard CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No ADAS systems documented for this vehicle.
ECU Modules
ECM - Bosch MG1CS016 - 1.0L EcoBoost M1DA 1 record
- Part number
- MG1CS016
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC275
- Notes
- Cross-checked professional module support evidence. Applies to 2010 within source span 2010-2011. Access methods: OBD / BENCH. Engine: 1.0L EcoBoost M1DA.
ECM - Bosch MED17.0.1 - 1.0L EcoBoost M1DA 1 record
- Part number
- MED17.0.1
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1767
- Notes
- Cross-checked professional module support evidence. Applies to 2010 within source span 2010-2011. Access methods: OBD / BENCH / BOOT. Engine: 1.0L EcoBoost M1DA.
ECM - Continental EMS2204 - 1.6L Duratec PNDA 1 record
- Part number
- EMS2204
- Manufacturer
- Continental
- Protocol / method
- BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1738
- Notes
- Cross-checked professional module support evidence. Applies to 2010 within source span 2010-2011. Access methods: BOOT. Engine: 1.6L Duratec PNDA.
ECM - Bosch EDC17C10 - 1.6L TDCI T1DA 1 record
- Part number
- EDC17C10
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1797
- Notes
- Cross-checked professional module support evidence. Applies to 2010 within source span 2010-2011. Access methods: OBD / BENCH / BOOT. Engine: 1.6L TDCI T1DA.
ECM - Siemens SID206 - 1.8L TDCI KKDA 1 record
- Part number
- SID206
- Manufacturer
- Siemens
- Protocol / method
- OBD / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- MPC561
- Notes
- Cross-checked professional module support evidence. Applies to 2010 within source span 2010-2011. Access methods: OBD / BOOT. Engine: 1.8L TDCI KKDA.
ECM - Delphi DCM6.1 - 2.0L Duratorq TDCI T7DB 1 record
- Part number
- DCM6.1
- Manufacturer
- Delphi
- Protocol / method
- OBD / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1797
- Notes
- Cross-checked professional module support evidence. Applies to 2010 within source span 2010-2011. Access methods: OBD / BOOT. Engine: 2.0L Duratorq TDCI T7DB.
ECM - Bosch EDC16C34 - 1.6L TDCi G8DB 1 record
- Part number
- EDC16C34
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- MPC561
- Notes
- Cross-checked professional module support evidence. Access methods: OBD / BENCH / BOOT. Engine: 1.6L TDCi G8DB.
TCU / TCM Transmission Modules
TCM - GM 6T80 - 1.5L EcoBoost M9D 6T80
- Part number
- 6T80
- Manufacturer
- GM
- Protocol / method
- BENCH
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- MPC561
- Notes
- Cross-checked professional module support evidence. Applies to 2010 within source span 2010-2011. Access methods: BENCH. Engine: 1.5L EcoBoost M9D.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Compact unibody; verify repair and calibration procedure by VIN.
- OBD Protocol
- ISO 15765-4 CAN
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Confirmed
Reviewed coverage: 2010 - 1.0L EcoBoost (M1DA), 1.0L EcoBoost (M1DH), 1.0L EcoBoost (M2DA), 1.6L Duratec (IQDB), 1.6L Duratec (PNDA), 1.6L Duratec (XTDA), 1.6L EcoBoost (JQDA), 1.6L EcoBoost (JTD), 1.6L TDCI (NGD), 1.6L TDCI (T1DA), 1.6L TDCI (T3DA), 1.6L TDCi (G8DB), 1.6L Ti-VCT (HXDA), 1.8L TDCI, 1.8L TDCI (KKDA), 1.8L TDCI (XTDA), 2.0L Duratorq TDCI (T7DB), 2.0L Duratorq TDCI (TXDB), 2.0L Duratorq TDCI (TYDA), 2.0L Duratorq TDCI (UFDB), 2.0L TDCI (G6DA), 2.0L TDCI (IXDA), 2.5L 20v ST.
Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2010 Ford Focus?
ADAS calibration pricing for a 2010 Ford Focus depends on which of its ADAS systems need work after a repair. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2010 Ford Focus?
Yes. The 2010 Ford Focus uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2010 Ford Focus?
After windshield replacement on a 2010 Ford Focus, the forward-facing ADAS camera typically requires recalibration before lane-keep, pre-collision, and adaptive-cruise systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2010 Ford Focus module service take?
Most 2010 Ford Focus onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 8 programmable modules documented in our database (7 ECU, 0 BCM, 1 TCU, 0 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2010 Ford Focus on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2010 Ford Focus. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2010 Ford Focus programming?
Every programming, cloning, and calibration job on the 2010 Ford Focus is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2010 Ford Focus can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2010 Ford Focus. For this vehicle our database documents:
- 7 engine control (ECU/PCM)
- 1 transmission control (TCU/TCM)
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2010 Ford Focus covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- MG1CS016, MED17.0.1, EMS2204, EDC17C10, SID206, DCM6.1, EDC16C34
- TCU / TCM Part Numbers
- 6T80
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2010 Ford Focus
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
FDRS Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.