Electronic systems coverage
This 2011 Ford Edge page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systems 3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2011 Ford Edge Supported Services
2011 Ford Edge
ADAS calibration, module programming, and security relearns
Ford Edge-specific trim and service details require VIN review.
Technical snapshot
- Platform -
- CAN Architecture -
- Security -
What do you need fixed?
Choose a service to start your quote.
Exact-year service summary for 2011 Ford Edge
Programmable modules
This page indexes 1 programmable module record across BCM coverage.
View modulesGateway and security
Gateway and immobilizer access is checked by VIN before service.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2011 Ford Edge using the documented module data on this page.
Choose a sectionVIN and build details determine exact service eligibility. A missing record does not mean we cannot help; ask about your vehicle.
YEAR-SPECIFIC NOTES
VIN / Build Split
Verify exact Ford Edge trim, drivetrain, engine, and installed systems by VIN.
Vehicle specifications & technical reference
OVERVIEW
Production
2010-2024
Trim Levels
Ford Edge-specific trim and service details require VIN review.
Drivetrain
FWD / AWD
What changes on this exact year
VIN and build split
Verify exact Ford Edge trim, drivetrain, engine, and installed systems by VIN.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Ford IDS / Ford FDRS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Ford-family configuration and service functions
FORScan
Useful for supported configuration and diagnostics; factory programming still moves to OEM software when required.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2011 Ford Edge. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Need something not listed? Most undocumented modules can still be programmed.
Get a Quote WHAT WE RESOLVE
Common issues on this vehicle
Common Ford Edge issues we resolve on this platform: Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - standard CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No ADAS systems documented for this vehicle.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
BCM - Body Electronics
Body Control Module - 10S14 conditional replacement BT4Z-15604-A
- Part number
- BT4Z-15604-A
- Notes
- Parts reference: 2011 Ford Edge, Oakville Assembly Plant, built 2010-10-25 through 2010-11-03. Ford Safety Recall 10S14 Supplement 3, February 18, 2011, page 5 lists physical Body Control Module BT4Z-15604-A. Applies only to affected VINs identified in OASIS where the recall inspection requires BCM replacement. Attachment III 10S14-S3 specifies a new IDS session with release 71.03B or higher and the Read BCM Serial Number result Replace the BCM module; a BCM is OK result does not qualify. No numeric serial threshold is published. Engine, transmission, cab and trim are unspecified. Individual eligibility and inspection results have not been checked. Historical recall reference only; check current VIN-specific replacement and supersession. No interchange or repair capability is established.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2011 Ford Edge?
ADAS calibration pricing for a 2011 Ford Edge depends on which of its ADAS systems need work after a repair. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2011 Ford Edge?
Yes. The 2011 Ford Edge uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2011 Ford Edge?
After windshield replacement on a 2011 Ford Edge, the forward-facing ADAS camera typically requires recalibration before lane-keep, pre-collision, and adaptive-cruise systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2011 Ford Edge module service take?
Most 2011 Ford Edge onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 1 programmable modules documented in our database (0 ECU, 1 BCM, 0 TCU, 0 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2011 Ford Edge on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2011 Ford Edge. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2011 Ford Edge programming?
Every programming, cloning, and calibration job on the 2011 Ford Edge is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2011 Ford Edge can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2011 Ford Edge. For this vehicle our database documents:
- 1 body control (BCM and related)
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2011 Ford Edge covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- BCM / Body Module Part Numbers
- BT4Z-15604-A
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Finish the repair
Need help finishing this repair?
Factory diagnostic software is available. We confirm the appropriate software and supported procedure for your vehicle.
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible work.
FDRS Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.