VIN / Build Split
VIN pos 4-8 identifies model/engine/restraint. Dodge WMI: 2C3 (Dodge car), 1C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2011 Dodge Challenger Supported Services
2011 Dodge Challenger
ADAS, Module Repair & Programming
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
- Platform LC/LX (2nd Gen, 2011-2014)
- CAN Architecture HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
- Security Chrysler SKREEM/RFHUB (SKIM - Sentry Key Immobilizer Module); Y164 or CY24 key blank with ID46 Philips transponder; PIN via wiTECH2 or StarScan; AKL requires wiTECH2 + security PIN + PCM/SKIM synchronization
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2011 Dodge Challenger. On this vehicle we cover documented systems include Rear View Camera, Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM), this LC/LX (2nd Gen, 2011-2014) platform vehicle, WCM / SKIM immobilizer support, Uconnect 4C infotainment programming. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
LC/LX (2nd Gen, 2011-2014)
Production
2008-2023
Trim Levels
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Drivetrain
RWD
Engine
-
CAN Speed
HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
YEAR-SPECIFIC NOTES
Infotainment
Uconnect 4C
Exact-year service summary for 2011 Dodge Challenger
Electronic systems coverage
This 2011 Dodge Challenger page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systemsProgrammable modules
This page indexes 17 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesGateway and security
This page includes 3 gateway, immobilizer, or key-security records for this 2011 Dodge Challenger.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2011 Dodge Challenger using the documented module data on this page.
Choose a sectionWhat changes on this exact year
Feature availability
Immobilizer: WCM / SKIM - Standard; Platform: LC/LX (2nd Gen, 2011-2014) - Confirmed
Driver-assist suite
No standard ADAS suite - pre-SafetyTec generation. Optional Forward Collision Warning, Blind Spot Monitoring, rear camera on upper trims; no standard Automatic Emergency Braking.
VIN and build split
VIN pos 4-8 identifies model/engine/restraint. Dodge WMI: 2C3 (Dodge car), 1C6 (Ram truck). Position 4-5 = model. Position 10 = model year code.
Infotainment context
Uconnect 4C; Uconnect (5" or 8.4" touchscreen); Bluetooth; USB/Aux; SiriusXM; navigation available
Network and access
CAN: HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Choose a section to view data
Feature availability 2
Immobilizer: WCM / SKIM
StandardKey programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Platform: LC/LX (2nd Gen, 2011-2014)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
WHAT WE RESOLVE
Common issues on this vehicle
Common Dodge Challenger issues we resolve on this platform: Rear View Camera, Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM) recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - LC/LX (2nd Gen, 2011-2014) platform uses HS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14. Key programming and immobilizer faults - WCM / SKIM immobilizer; all-keys-lost supported.
Documented for the LC - includes this 2011 model year. Open the full coverage on the generation guide.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2011 Dodge Challenger?
ADAS calibration pricing for a 2011 Dodge Challenger depends on which of its 3 documented systems need work after a repair. This vehicle is documented with Rear View Camera, Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM). We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs and we return a number within 4 hours.
Can you reset the airbag light on a 2011 Dodge Challenger?
Yes. The 2011 Dodge Challenger uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: P05108873AB. Bench-only or in-vehicle - both paths are supported. Send the part number and a description of what triggered the light, and we will provide a quote and ETA.
What is needed after replacing the windshield on a 2011 Dodge Challenger?
After windshield replacement on a 2011 Dodge Challenger, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site (DFW Metroplex) with OE target fixtures or via mail-in for the front camera/radar module.
How long does a 2011 Dodge Challenger module service take?
Most 2011 Dodge Challenger jobs complete same-day once the vehicle or module arrives. This vehicle has roughly 15 programmable modules documented in our database (1 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Module-bench work (ECU clones, BCM reprograms, SRS resets) ships back inside 1-3 business days including return shipping. ADAS calibration is on-site for DFW or mail-in for the front module.
Do you cover the 2011 Dodge Challenger on-site, or is this mail-in only?
Both. We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding) and a mail-in bench for module-only jobs (ECU cloning, BCM repair, SRS reset, TCU clone). Quote the work and we will tell you which path is right for the 2011 Dodge Challenger.
What kind of warranty do you offer on 2011 Dodge Challenger programming?
Every programming, cloning, and calibration job on the 2011 Dodge Challenger is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2011 Dodge Challenger with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2011 Dodge Challenger. Immobilizer generation on this platform: WCM / SKIM. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2011 Dodge Challenger can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2011 Dodge Challenger. For this vehicle our database documents:
- 1 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
- 1 body control (BCM and related)
- 3 ABS / brake control (EBCM)
- 1 immobilizer / security
- 2 key & fob
- 1 instrument cluster (IPC)
- 2 steering angle sensor (SAS)
- 3 ADAS module
Infotainment on this platform: Uconnect 4C. Send the VIN and the operations performed and we will confirm support and pricing.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing for your specific vehicle within 4 hours.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2011 Dodge Challenger
These vehicles use one or more of the same replacement modules indexed for this vehicle.