We provide the software and equipment for the agreed work. The exact tool and procedure depend on your year, VIN and module.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2nd Gen G02 - 2019-2025 generation coverage
2019-2025 BMW X4 service guide ADAS Calibration & Module Programming
Choose a repair service below or find your module by part number. Onsite help is available in Dallas-Fort Worth, with mail-in module service nationwide.
What do you need fixed?
Choose a service to start your quote.
Find your module
55 documented BMW X4 module records across the 2019-2025 generation. Search by module name or part number, then open a result for requirements and repair options.
No matching records. Try a shorter part number or clear the filters. You can still request help if your module is not listed.
ECU / Engine
DME - B48B20 2.0L (330i) Verify by VIN 12146-8652015
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 12146-8652015
- Protocol / method
- ISTA SDP
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MG1CS003
- Notes
- ISTA SDP flash required. ISN (Individual Serial Number) in DME must match CAS/FEM/BDC - ISN adaptation is mandatory after DME replacement. Specialist ISN tools (AUTEL IM608 Pro, Autologic, or BMW ISTA with dealer auth) required to read/write ISN. Battery must be at sufficient charge before SDP flash. Do not interrupt flash - EtherBoot on BDC-equipped builds. Aftermarket DME requires ISN adaptation or vehicle will not start.
DME - B58B30 3.0L I6 (M340i / M340i xDrive) Verify by VIN 12146-8491100
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 12146-8491100
- Protocol / method
- ISTA SDP
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MG1CS003
- Notes
- Same ISN adaptation requirement as B48 DME. ISTA SDP required.
DME - S58 3.0L I6 Bi-Turbo (M3 / M3 Competition) Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Protocol / method
- ISTA SDP
- Coding required
- Yes
- Cloning supported
- No
- Chip / MCU
- Bosch MG1CS003
- Notes
- M3-specific S58 DME. ISN adaptation mandatory. ISTA SDP flash. BMW M-specific dealer authorization may be required for M3 DME replacement. Do not use non-M DME in M3 - hardware and software are distinct.
TCM / Transmission
TCU - ZF 8HP50 8-Speed Auto 2 records
OBD
Documented for 2019-2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019, 2020
Donor must match part family 8HP70X - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8HP70X
- Protocol / method
- OBD
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Requires ISTA/D programming and adaptation, ZF LifeguardFluid 8 ATF, gear position relearn via test drive
J2534
Documented for 2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025
Donor must match part family 8HP70X-7 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8HP70X-7
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon AURIX TC297
- Notes
- Requires BMW ISTA coding, transmission adaptation via test drive, ZF Lifeguard 8 ATF spec, shift relearn 50km
TCU - ZF 8HP75 8-Speed Auto 2 records
OBD
Documented for 2019-2020 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019, 2020
Donor must match part family 8HP75X - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8HP75X
- Protocol / method
- OBD
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Requires ISTA/D programming and adaptation, ZF LifeguardFluid 8 ATF, gear position relearn via test drive
J2534
Documented for 2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2025
Donor must match part family 8HP75X-7 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8HP75X-7
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon AURIX TC297
- Notes
- Requires BMW ISTA coding, transmission adaptation via test drive, ZF Lifeguard 8 ATF spec, shift relearn 50km
TCU - 8HP45 8-Speed Auto Verify by VIN 2021-2022 1 record
Documented for 2021-2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021, 2022
Donor must match part family 8HP70Z - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8HP70Z
- Protocol / method
- OBD
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Requires ISTA programming and adaptation. ATF spec: Shell M-1375.4. TCU variant learning required after installation.
TCU - 8HP50 8-Speed Auto 2 records
OBD
Documented for 2021-2022 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2021, 2022
Donor must match part family 8HP70Z - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8HP70Z
- Protocol / method
- OBD
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- Requires ISTA programming and adaptation. ATF spec: Shell M-1375.4. TCU variant learning required after installation.
J2534
Documented for 2023-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024
Donor must match part family 8618308 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8618308
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- ZF 8HP transmission adaptation required, use ISTA/D for coding, ATF: ZF Lifeguard 8
TCU - 8HP75 8-Speed Auto Verify by VIN 2023-2024 1 record
Documented for 2023-2024 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2023, 2024
Donor must match part family 8618309 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 8618309
- Protocol / method
- J2534
- Coding required
- Yes
- Cloning supported
- Yes
- Chip / MCU
- Infineon TC1797
- Notes
- ZF 8HP heavy duty variant, transmission adaptation required, use ISTA/D for coding, ATF: ZF Lifeguard 8
BCM / Body electronics
Body Domain Controller (BDC) Bench clone required 61356-9472831
Module information indicates cloning or bench work.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Donor must match part family 61356-9472831; VIN-locked - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 61356-9472831
- Security
- BMW ISN / FEM-BDC
- Coding required
- Yes
- Cloning supported
- No
- Notes
- BDC present on later G20 production builds - verify via VIN production date in ISTA (earlier builds use FEM). ISTA SDP required for coding and ISM (immobilizer) adaptation. ISN synchronization between BDC and DME mandatory after replacement. Clone not supported - new BDC must be coded via ISTA with vehicle order data. EtherBoot (Ethernet-based SDP flash) required on BDC-equipped builds.
FEM - Front Electronic Module Dealer security required
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Security
- BMW ISN / CAS
- Coding required
- Yes
- Cloning supported
- No
- Notes
- FEM present on earlier G20 production builds. Check VIN production date in ISTA to determine FEM vs BDC. ISTA SDP coding required. Immobilizer adaptation to DME via ISN. FEM controls central locking, power windows, exterior lighting logic, and immobilizer gateway. Replacement requires full ISTA vehicle order coding session.
SRS / Airbag
Advanced Crash Safety Module (ACSM) 11 records
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 65779890597
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 65779890599
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 65779314520
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 65779341546
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 51118070395
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 65776834911
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 65776991455
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 34506859776
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 07119907517
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 65779367457
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
Under center console
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 65779367455
- Location
- Under center console
- Manufacturer
- Continental
- Notes
- Requires ISTA/D or compatible tool for coding. VIN must be programmed to replacement module. Transport mode must be deactivated. Disconnect battery and wait 10 minutes before removal.
ABS / Brakes
DSC - Dynamic Stability Control Module Verify by VIN 34526-792829
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 34526-792829
- Cloning supported
- No
- Notes
- Bosch DSC unit. ISTA coding required after replacement. Hydraulic bleed procedure required post-replacement - use ISTA automated bleed cycle. Steering angle sensor recalibration required via ISTA after DSC replacement. DTC 5E20 common if wheel speed sensor connector disturbed during removal. Part number approximate - verify via VIN in BMW EPC.
Other modules
Instrument Panel Cluster (IPC) Verify by VIN 2019 62108052820
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Donor must match part family 62108052820 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 62108052820
- Cloning supported
- Yes
- Notes
- IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC) Verify by VIN 2020-2021 62108719999
Documented for 2020-2021 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020, 2021
Donor must match part family 62108719999 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 62108719999
- Cloning supported
- Yes
- Notes
- G02 X4 pre-LCI Live Cockpit
Instrument Panel Cluster (IPC) Verify by VIN 2022-2025 62108760999
Documented for 2022-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2022, 2023, 2024, 2025
Donor must match part family 62108760999 - requires cloning
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 62108760999
- Cloning supported
- Yes
- Notes
- G02 X4 LCI Live Cockpit Pro
Steering Angle Sensor (SAS) Verify by VIN 2019
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS) Verify by VIN 2019
Documented for 2019 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2019
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- cross-year extension)
Steering Angle Sensor (SAS) Verify by VIN 2020-2025
Documented for 2020-2025 within this generation. Confirm the exact vehicle by VIN.
Coverage and replacement notes
Documented years: 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Coding required
- Yes
- Notes
- INTEGRATED (ZGM steering column)
Connectivity / Accessories
Head-Up Display (HUD) Verify by VIN 62306-9452494
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 62306-9452494
- Notes
- ISTA coding required after HUD module replacement. HUD angle calibration required - ISTA guided procedure.
Digital Instrument Cluster (Live Cockpit Professional) Verify by VIN 62106-9475024
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Part number
- 62106-9475024
- Notes
- ISTA SDP coding required. VIN adaptation and vehicle order data written during coding. 12.3 inch fully digital cluster standard on most G20 trims.
Harman Kardon Audio System Verify by VIN
Confirm the procedure for your VIN and part number. Review the documented notes below.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Notes
- ISTA coding required after amplifier or head unit replacement.
Reference information for 2019-2025. Coverage can vary by year and equipment. Confirm the VIN and full part number before ordering a replacement.
Vehicle overview
- Vehicle
- BMW X4
- Model years
- 2019-2025
- Generation
- 2nd Gen G02
- Platform
- G02
Tools we use for this vehicle
Factory scan, coding, and calibration access
BMW ISTA-D / BMW ISTA-P
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Tool requirements
Basic OBD2 scanner
View capabilities and limitations
Supported work
- Read codes on SRS systems (11 documented rows)
- Read codes on ECU systems (3 documented rows)
- Read codes on BCM systems (2 documented rows)
- Read codes on TCU / TCM systems (8 documented rows)
- Read codes on ABS systems (1 documented row)
- Read codes on IPC / SAS systems (6 documented rows)
- Read codes on Gateway systems (21 documented rows)
- Read codes on Keys systems (1 documented row)
- Read codes on Immobilizer systems (1 documented row)
- Read codes on Accessory systems (3 documented rows)
Limitations
- BCM programming, coding, cloning, or security work (2 documented rows)
- Gateway programming, coding, cloning, or security work (21 documented rows)
- Immobilizer programming, coding, cloning, or security work (1 documented row)
Factory programming software (J2534)
View capabilities and limitations
Supported work
- Factory scan, coding, and calibration access: Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Bench programmer
View capabilities and limitations
Supported work
- BCM bench clone rows (1 documented row)
Dealer or specialist
View capabilities and limitations
Supported work
- BCM dealer security rows (1 documented row)
- Gateway dealer security rows (21 documented rows)
- Immobilizer dealer security rows (1 documented row)
Dealer security and specialist module work should be scoped by VIN before you buy parts or pay for programming.
Get a QuoteKnow this platform
This platform uses HS-CAN + CANFD; BMW network; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps).
- CAN
- HS-CAN + CANFD; BMW network; OBD2 DLC Pin 6/14
- OBD
- ISO 15765-4 CAN (500 kbps)
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - bmw not in openpilot support tree
Not in openpilot support tree as of April 2026. BMW not in openpilot official tree. No community port has been merged.
Generation service summary for BMW X4 2nd Gen G02 (2019-2025)
Generation coverage
This page consolidates BMW X4 service data for 2019-2025 across 7 model years; service information is available for 7 years.
Choose a yearADAS coverage
Merged ADAS coverage includes 42 system records, including Forward Camera (Mobileye EyeQ4) (2019), Forward Radar (Continental ARS) (2019), Blind Spot Monitor - Left Rear Radar (2019), and Blind Spot Monitor - Right Rear Radar (2019). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 13 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 55 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, and security-access planning for the BMW X4 2019-2025 span, with exact-year validation before service. Mail-in module service is available nationwide.
Get a quoteDo I need calibration?
Windshield Replacement 4
KAFAS 3 Camera
2019-2025required
KAFAS 3 mono camera requires static target calibration followed by dynamic road drive via ISTA. Use only OEM-approved windshield glass - non-OEM glass may cause calibration failure due to rake angle or tint variance. Reinstall camera bracket precisely per ISTA mounting spec.
Lane Departure Warning
2019-2025required
KAFAS 3 mono camera requires static target calibration followed by dynamic road drive via ISTA. Use only OEM-approved windshield glass - non-OEM glass may cause calibration failure due to rake angle or tint variance. Reinstall camera bracket precisely per ISTA mounting spec.
Frontal Collision Warning
2019-2025required
KAFAS 3 mono camera requires static target calibration followed by dynamic road drive via ISTA. Use only OEM-approved windshield glass - non-OEM glass may cause calibration failure due to rake angle or tint variance. Reinstall camera bracket precisely per ISTA mounting spec.
Active Cruise Control
2019-2025required
KAFAS 3 mono camera requires static target calibration followed by dynamic road drive via ISTA. Use only OEM-approved windshield glass - non-OEM glass may cause calibration failure due to rake angle or tint variance. Reinstall camera bracket precisely per ISTA mounting spec.
Front Bumper Repair or Replacement 3
FRSF Front Radar
2019-2025required
ISTA static radar alignment required after front bumper work. Vehicle at curb weight on level surface. Inspect radar mounting bracket for deformation. FRSF radar aim out-of-tolerance triggers DTC 48A0 and disables ACC.
Adaptive Cruise Control
2019-2025required
ISTA static radar alignment required after front bumper work. Vehicle at curb weight on level surface. Inspect radar mounting bracket for deformation. FRSF radar aim out-of-tolerance triggers DTC 48A0 and disables ACC.
Pre-Collision
2019-2025required
ISTA static radar alignment required after front bumper work. Vehicle at curb weight on level surface. Inspect radar mounting bracket for deformation. FRSF radar aim out-of-tolerance triggers DTC 48A0 and disables ACC.
Rear Bumper Repair or Replacement 2
BSD Side Radar (L/R)
2019-2025required
BSD rear corner radar modules require ISTA coding verification after any rear bumper work. Static calibration required if module was removed or replaced. Confirm sensor covers are flush post-reinstall.
Blind Spot Detection
2019-2025required
BSD rear corner radar modules require ISTA coding verification after any rear bumper work. Static calibration required if module was removed or replaced. Confirm sensor covers are flush post-reinstall.
DME Replacement 3
Engine Management
2019-2025required
ISN adaptation mandatory after any DME replacement. ISTA SDP flash required. CAS/FEM/BDC ISN must match new DME ISN - failure to adapt will result in no-start condition. BMW dealer authorization or specialist ISN tool required.
Immobilizer
2019-2025required
ISN adaptation mandatory after any DME replacement. ISTA SDP flash required. CAS/FEM/BDC ISN must match new DME ISN - failure to adapt will result in no-start condition. BMW dealer authorization or specialist ISN tool required.
ISN Synchronization
2019-2025required
ISN adaptation mandatory after any DME replacement. ISTA SDP flash required. CAS/FEM/BDC ISN must match new DME ISN - failure to adapt will result in no-start condition. BMW dealer authorization or specialist ISN tool required.
FEM or BDC Replacement 4
Immobilizer
2019-2025required
Full ISTA vehicle order coding required. ISN synchronization with DME mandatory. All keys must be re-adapted to new FEM/BDC. EtherBoot SDP flash on BDC-equipped builds.
Central Locking
2019-2025required
Full ISTA vehicle order coding required. ISN synchronization with DME mandatory. All keys must be re-adapted to new FEM/BDC. EtherBoot SDP flash on BDC-equipped builds.
Exterior Lighting
2019-2025required
Full ISTA vehicle order coding required. ISN synchronization with DME mandatory. All keys must be re-adapted to new FEM/BDC. EtherBoot SDP flash on BDC-equipped builds.
Key Programming
2019-2025required
Full ISTA vehicle order coding required. ISN synchronization with DME mandatory. All keys must be re-adapted to new FEM/BDC. EtherBoot SDP flash on BDC-equipped builds.
Any Collision 5
SRS Airbag Module
2019-2025required
Full ISTA module scan mandatory post-collision. SRS module replace-only after hard deployment. Check all ADAS sensor mounting integrity. Clear DTCs only after physical inspection of all sensor brackets and connectors.
KAFAS 3
2019-2025required
Full ISTA module scan mandatory post-collision. SRS module replace-only after hard deployment. Check all ADAS sensor mounting integrity. Clear DTCs only after physical inspection of all sensor brackets and connectors.
FRSF Radar
2019-2025required
Full ISTA module scan mandatory post-collision. SRS module replace-only after hard deployment. Check all ADAS sensor mounting integrity. Clear DTCs only after physical inspection of all sensor brackets and connectors.
BSD Radar
2019-2025required
Full ISTA module scan mandatory post-collision. SRS module replace-only after hard deployment. Check all ADAS sensor mounting integrity. Clear DTCs only after physical inspection of all sensor brackets and connectors.
DSC
2019-2025required
Full ISTA module scan mandatory post-collision. SRS module replace-only after hard deployment. Check all ADAS sensor mounting integrity. Clear DTCs only after physical inspection of all sensor brackets and connectors.
Wheel Alignment / Suspension Work 3
FRSF Front Radar
2019-2025recommended
Any suspension height change or alignment work may shift radar aim angles. ISTA radar static calibration and DSC steering angle sensor recalibration recommended after suspension work.
BSD Side Radar
2019-2025recommended
Any suspension height change or alignment work may shift radar aim angles. ISTA radar static calibration and DSC steering angle sensor recalibration recommended after suspension work.
DSC Steering Angle Sensor
2019-2025recommended
Any suspension height change or alignment work may shift radar aim angles. ISTA radar static calibration and DSC steering angle sensor recalibration recommended after suspension work.
Forward Radar Replacement 2
2019
Yes
Radar module replacement requires alignment/calibration using ISTA+.
2020-2025
Yes
Radar module replacement requires alignment/calibration using ISTA+.
BSM Sensor Replacement 2
2019
Yes
Blind spot monitoring sensor replacement requires calibration using ISTA+.
2020-2025
Yes
Blind spot monitoring sensor replacement requires calibration using ISTA+.
Mirror Replacement 2
2019
Conditional
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ISTA+ if applicable.
2020-2025
Conditional
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ISTA+ if applicable.
Year-by-year details
| Year | Trim notes |
|---|---|
| 2019 | Available in multiple trim/engine variants for the 2019 model year. Refer to the VIN for exact engine code and installed option packages (SA codes). |
| 2020 | Available in multiple trim/engine variants for the 2020 model year. Refer to the VIN for exact engine code and installed option packages (SA codes). |
| 2021 | Available in multiple trim/engine variants for the 2021 model year. Refer to the VIN for exact engine code and installed option packages (SA codes). |
| 2022 | Available in multiple trim/engine variants for the 2022 model year. Refer to the VIN for exact engine code and installed option packages (SA codes). |
| 2023 | Available in multiple trim/engine variants for the 2023 model year. Refer to the VIN for exact engine code and installed option packages (SA codes). |
| 2024 | Available in multiple trim/engine variants for the 2024 model year. Refer to the VIN for exact engine code and installed option packages (SA codes). |
| 2025 | Available in multiple trim/engine variants for the 2025 model year. Refer to the VIN for exact engine code and installed option packages (SA codes). |
What changes across 2019-2025
Differences versus the generation reference. Years not listed here match the shared platform data on this page.
2019
- Trims: Available in multiple trim/engine variants for the 2019 model year. Refer to the VIN for exact engine code and installed option packages...
2020
- Trims: Available in multiple trim/engine variants for the 2020 model year. Refer to the VIN for exact engine code and installed option packages...
2021
- Trims: Available in multiple trim/engine variants for the 2021 model year. Refer to the VIN for exact engine code and installed option packages...
2022
- Trims: Available in multiple trim/engine variants for the 2022 model year. Refer to the VIN for exact engine code and installed option packages...
2023
- Trims: Available in multiple trim/engine variants for the 2023 model year. Refer to the VIN for exact engine code and installed option packages...
2024
- Trims: Available in multiple trim/engine variants for the 2024 model year. Refer to the VIN for exact engine code and installed option packages...
42 ADAS systems documented across the 2019-2025 generation. Rows that apply to only part of the generation carries a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
BMW Driving Assistant Plus: Adaptive Cruise Control, Active Lane Keep, Lane Change Warning, Rear Collision Prevention, Active Blind Spot Detection, Cross-traffic Alert, Park Assist
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Mobileye EyeQ4) 2019 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS) 2019 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Rear Radar 2019 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Rear Radar 2019 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear View Camera 2019 | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Front & Rear 2019 | Parking Sensor | Ultrasonic | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2020 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS) 2020 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Rear Radar 2020 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Rear Radar 2020 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear View Camera 2020 | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Front & Rear 2020 | Parking Sensor | Ultrasonic | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2021 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS) 2021 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Rear Radar 2021 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Rear Radar 2021 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear View Camera 2021 | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Front & Rear 2021 | Parking Sensor | Ultrasonic | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2022 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS) 2022 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Rear Radar 2022 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Rear Radar 2022 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear View Camera 2022 | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Front & Rear 2022 | Parking Sensor | Ultrasonic | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2023 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS) 2023 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Rear Radar 2023 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Rear Radar 2023 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear View Camera 2023 | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Front & Rear 2023 | Parking Sensor | Ultrasonic | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2024 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS) 2024 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Rear Radar 2024 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Rear Radar 2024 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear View Camera 2024 | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Front & Rear 2024 | Parking Sensor | Ultrasonic | None | YES | - | |
| Forward Camera (Mobileye EyeQ4) 2025 | Forward Camera | Camera | Static | YES | - | |
| Forward Radar (Continental ARS) 2025 | Front Radar | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Left Rear Radar 2025 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Blind Spot Monitor - Right Rear Radar 2025 | Blind Spot Monitor | Radar | Static + Dynamic | YES | - | |
| Rear View Camera 2025 | Rear Camera | Camera | Static | YES | - | |
| Park Distance Control (PDC) - Front & Rear 2025 | Parking Sensor | Ultrasonic | None | YES | - |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: KAFAS 3 Camera, Lane Departure Warning, Frontal Collision Warning, Active Cruise Control
KAFAS 3 mono camera requires static target calibration followed by dynamic road drive via ISTA. Use only OEM-approved windshield glass - non-OEM glass may cause calibration failure due to rake angle or tint variance. Reinstall camera bracket precisely per ISTA mounting spec.
Front Bumper Repair or Replacement Affected: FRSF Front Radar, Adaptive Cruise Control, Pre-Collision
ISTA static radar alignment required after front bumper work. Vehicle at curb weight on level surface. Inspect radar mounting bracket for deformation. FRSF radar aim out-of-tolerance triggers DTC 48A0 and disables ACC.
Rear Bumper Repair or Replacement Affected: BSD Side Radar (L/R), Blind Spot Detection
BSD rear corner radar modules require ISTA coding verification after any rear bumper work. Static calibration required if module was removed or replaced. Confirm sensor covers are flush post-reinstall.
DME Replacement Affected: Engine Management, Immobilizer, ISN Synchronization
ISN adaptation mandatory after any DME replacement. ISTA SDP flash required. CAS/FEM/BDC ISN must match new DME ISN - failure to adapt will result in no-start condition. BMW dealer authorization or specialist ISN tool required.
FEM or BDC Replacement Affected: Immobilizer, Central Locking, Exterior Lighting, Key Programming
Full ISTA vehicle order coding required. ISN synchronization with DME mandatory. All keys must be re-adapted to new FEM/BDC. EtherBoot SDP flash on BDC-equipped builds.
Any Collision Affected: SRS Airbag Module, KAFAS 3, FRSF Radar, BSD Radar, DSC
Full ISTA module scan mandatory post-collision. SRS module replace-only after hard deployment. Check all ADAS sensor mounting integrity. Clear DTCs only after physical inspection of all sensor brackets and connectors.
Wheel Alignment / Suspension Work Affected: FRSF Front Radar, BSD Side Radar, DSC Steering Angle Sensor
Any suspension height change or alignment work may shift radar aim angles. ISTA radar static calibration and DSC steering angle sensor recalibration recommended after suspension work.
Forward Radar Replacement 2019
Radar module replacement requires alignment/calibration using ISTA+.
BSM Sensor Replacement 2019
Blind spot monitoring sensor replacement requires calibration using ISTA+.
Mirror Replacement 2019
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ISTA+ if applicable.
Forward Radar Replacement 2020-2025
Radar module replacement requires alignment/calibration using ISTA+.
BSM Sensor Replacement 2020-2025
Blind spot monitoring sensor replacement requires calibration using ISTA+.
Mirror Replacement 2020-2025
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use ISTA+ if applicable.
23 gateway, immobilizer, and security items documented across the 2019-2025 generation.
Gateway / Security Modules
Central Gateway Module 21 records
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- Renesas
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- R7F701057
- Notes
- Compatibility label: EVO. AMP Notes: Read/Write
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XET512
- Notes
- Compatibility label: 7 series F01. FRM-Foot Space
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E series. FRM-Foot Space Notes: Read/Write
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XDT256
- Notes
- Compatibility label: E70 AHL. FRM-Foot Space Notes: 0L15Y
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E70 VDM. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E70 XE. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E81 E82 E88 XE. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E87 BASIS. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E87 E92 E93 AHL. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E87 E92 E93 XE. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E89 E9X LED AHL. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E89 E9X LED XE. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: E90 E91 LED BASIS. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XET512
- Notes
- Compatibility label: F series. FRM-Foot Space Notes: Read/Write
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XET512
- Notes
- Compatibility label: F18. FRM-Foot Space
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: MAX Brose. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: R56 HIGH EKS. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- Compatibility label: R56 R56 HIGH EKS. FRM-Foot Space Notes: 3M25J
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Manufacturer
- NXP / Freescale
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384
- Notes
- FRM-Foot Space BMW E Serices Notes: 3M25J, free code
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- CAS4/CAS4+
- Notes
- Compatibility label: CAS4/CAS4+. CAS4/CAS4+
Module information indicates immobilizer or VIN security.
Coverage and replacement notes
Documented years: 2019, 2020, 2021, 2022, 2023, 2024, 2025
Year coverage is not proof of interchangeability. Confirm the full part number and vehicle configuration before buying a used module.
- Security
- VIN-locked (UDS)
- VIN locked
- Yes
- Coding required
- Yes
- Chip / MCU
- 9S12XEQ384(3M25J)
- Notes
- Compatibility label: BMW E Serices. Central gateway routes CAN/CAN-FD/Ethernet between module domains. Replacement requires VIN write and as-built configuration load via OEM software (ODIS, FDRS, DTS Monaco, etc.).
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Steel-aluminum unibody; sport coupe roofline
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- HS-CAN + CANFD; BMW network; OBD2 DLC Pin 6/14
- Infotainment
- BMW iDrive 7 10.25" (2019-2021); iDrive 8 12.3" (2022+); OTA updates
- OTA Capable
- Yes
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
WHAT WE RESOLVE
2nd Gen G02 (2019-2025) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Mobileye EyeQ4) (2019), Forward Radar (Continental ARS) (2019), Blind Spot Monitor - Left Rear Radar (2019), and Blind Spot Monitor - Right Rear Radar (2019). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve Advanced Crash Safety Module (ACSM). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program BMW X4 (2019-2025) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the BMW X4 (2019-2025). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for BMW X4 (2019-2025)?
The BMW X4 (2019-2025) generation currently shows 25 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS modules include Advanced Crash Safety Module (ACSM). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 65779890597 - confirm for your exact year/VIN.
Does BMW X4 (2019-2025) need ADAS calibration after glass or collision work?
The merged generation data documents 42 ADAS systems, including Forward Camera (Mobileye EyeQ4) (2019), Forward Radar (Continental ARS) (2019), Blind Spot Monitor - Left Rear Radar (2019), Blind Spot Monitor - Right Rear Radar (2019), and Rear View Camera (2019). Calibration triggers include Windshield Replacement, Front Bumper Repair or Replacement, Rear Bumper Repair or Replacement, and DME Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on BMW X4 (2019-2025)?
Yes. The generation data includes 11 SRS records, including Advanced Crash Safety Module (ACSM). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 65779890597 - confirm for your exact year/VIN.
Do all BMW X4 (2019-2025) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2019-2025; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
How long does service take for BMW X4 (2019-2025)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module service is available nationwide. Exact service eligibility is confirmed from the year, VIN, module, and requested scope.
Is BMW X4 (2019-2025) service mobile or mail-in?
Mobile service covers DFW on-vehicle diagnostics, post-repair coding, and supported module work. Mail-in module service is available nationwide. We confirm the active path for your exact year, VIN, module, and requested scope before service.
More X4 generations
2nd Gen G02 2019-2025 You are here
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
BMW ISTA Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.