Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Covers model years 2007-2013 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Acura MDX built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
PlatformYD2 (2nd Gen, 2007-2013)
CAN ArchitectureHS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
SecurityAcura/Honda EEPROM-based transponder (ID46 compatible, 2001-2014); HON66 or HON58 key blank; no OBD PIN extraction (EEPROM read required); AKL requires Honda iN dealer authorization + HDS
The ADAS, module, and security rows below are consolidated across the full 2007-2013 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2007-2013”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2007 Acura Mdx. On this vehicle we cover documented systems include Rear View Camera and CMBS Forward Camera (Monocular), this YD2 (2nd Gen, 2007-2013) platform vehicle, HISS / Honda Smart Entry immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Merged ADAS coverage includes 2 system records, including Rear View Camera and CMBS Forward Camera (Monocular). Year-marked systems apply only to the shown range.
The merged generation page indexes 26 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Acura MDX 2007-2013 span, with exact-year validation before service.
Always match the full part number before buying a used module.
PART
77800STXA820C3
LOCATION
Under center console
MFG
Denso
NOTES
Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
SRS Control UnitVerify by VIN201277800-STX-A820-C3
_years covers only 2012 for this generation
Used/donor module guide
Compatible donor years: 2012
Always match the full part number before buying a used module.
PART
77800-STX-A820-C3
LOCATION
Under center console
MFG
Denso
NOTES
Requires Honda HDS or J2534 for SRS reset. DTC B1000 common after crash clear. Battery disconnect required before removal. Module relearn via HDS after installation.
ECU MODULES
ECU Modules
Powertrain Control Module (PCM) - Keihin J37A1 3.7L V6 5ATx3
37820-RYE-A56Verify by VIN2007J2534
_years covers only 2007 for this generation
Used/donor module guide
Compatible donor years: 2007
Always match the full part number before buying a used module.
PART
37820-RYE-A56
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Keihin (Hitachi SH-2 family)
NOTES
2007 Acura MDX YD2 J37A1 3.7L. Part 37820-RYE-A56 confirmed on eBay OEM listing (2007 ACURA MDX ECU: 37820-RYE-A56) and zappauto.com (OEM Engine Computer Acura Mdx 2007 37820-Rye-A56) and seabreezeautoparts.com (07-08-09 Acura MDX 37820-RYE-A56). Honda dealer supersession to 37820-RYE-A59 covering 2007 (acurapartswarehouse.com / acura.oempartsonline.com). All 2nd-gen MDX 2007-2009 are SH-AWD with 5AT. | Sources: https://www.ebay.com/itm/275523321181 | Alt PN: 37820RYEA56
37820-RYE-A62Verify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
37820-RYE-A62
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Keihin (Hitachi SH-2 family)
NOTES
2008 Acura MDX J37A1 3.7L. Part 37820-RYE-A62 confirmed on modulemechanics.com (37820-RYE-A62 3.7L ECU for Acura MDX 2007-2009). Variant A63 also documented (37820-RYE-A63 A/T ECU). Continuation of RYE family with revision update. | Sources: https://modulemechanics.com/product/37820-rye-a62-3-7l-ecu-with-programming-vin-security-acura-mdx-ecm-pcm-engine-control-computer-oem/ | Alt PN: 37820RYEA62
37820-RYE-A75Verify by VIN2009J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
PART
37820-RYE-A75
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Keihin (Hitachi SH-2 family)
NOTES
2009 Acura MDX J37A1 3.7L. Part 37820-RYE-A75 confirmed on modulemechanics.com (37820-RYE-A75 3.7L ECU for Acura MDX 2007-2009). Variant A76/A77 also documented (modulemechanics.com 37820-RYE-A76 / A77). 2009 MY introduced Advance trim package. Note: 2010+ MDX moved to 6AT and a different ECU family (37820-RYE-A79/A89). | Sources: https://modulemechanics.com/product/37820-rye-a75-3-7l-ecu-with-programming-vin-security-acura-mdx-ecm-pcm-engine-control-computer-oem/ | Alt PN: 37820RYEA75
Always match the full part number before buying a used module.
PART
37820-RYE-A57
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Keihin (Hitachi SH-2 family)
NOTES
2007 Acura MDX J37A1 alternate package revision. Part 37820-RYE-A57 confirmed on Amazon/Module Mechanics OEM listings (37820-RYE-A57 3.7L ECU for Acura MDX 2007-2009) and eBay (37820-RYE-A57 ecm ecu computer 2007 Acura MDX). Honda dealer supersession to 37820-RYE-A59. Differentiated from A56 typically by Tech/Sport vs Base trim emissions calibration. | Sources: https://www.amazon.com/Engine-Control-Module-37820-RYE-A57-37820RYEA57/dp/B0F58QGFPR | Alt PN: 37820RYEA57
37820-RYE-A63Verify by VIN2008J2534
_years covers only 2008 for this generation
Used/donor module guide
Compatible donor years: 2008
Always match the full part number before buying a used module.
PART
37820-RYE-A63
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Keihin (Hitachi SH-2 family)
NOTES
2008 Acura MDX J37A1 federal-emissions revision. Part 37820-RYE-A63 confirmed on modulemechanics.com (37820-RYE-A63 A/T ECU for Acura MDX). A62/A63 typically differ by emissions calibration (federal vs PZEV/CARB) within same MY. | Sources: https://modulemechanics.com/product/37820-rye-a63-a-t-ecu-with-programming-vin-security-acura-mdx-ecm-pcm-engine-control-computer-oem/ | Alt PN: 37820RYEA63
37820-RYE-A77Verify by VIN2009J2534
_years covers only 2009 for this generation
Used/donor module guide
Compatible donor years: 2009
Always match the full part number before buying a used module.
PART
37820-RYE-A77
PROTOCOL
J2534
CODING
Yes
CLONE
No
CHIP/MCU
Keihin (Hitachi SH-2 family)
NOTES
2009 Acura MDX J37A1 Advance/Sport package alternate revision. Part 37820-RYE-A77 confirmed on modulemechanics.com. A75/A76/A77 typically differ by package/emissions calibration. | Sources: https://modulemechanics.com/product/37820-rye-a77-3-7l-ecu-with-programming-vin-security-acura-mdx-ecm-pcm-engine-control-computer-oem/ | Alt PN: 37820RYEA77
Always match the full part number before buying a used module.
NOTES
Rear WSS.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC)Verify by VIN201078100-STX-A13
_years covers only 2010 for this generation
Used/donor module guide
Compatible donor years: 2010
Donor must match part family 78100-STX-A13 - requires cloning
Always match the full part number before buying a used module.
PART
78100-STX-A13
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC)Verify by VIN201178100-STX-A23
_years covers only 2011 for this generation
Used/donor module guide
Compatible donor years: 2011
Donor must match part family 78100-STX-A23 - requires cloning
Always match the full part number before buying a used module.
PART
78100-STX-A23
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC)Verify by VIN201278100-STX-A33
_years covers only 2012 for this generation
Used/donor module guide
Compatible donor years: 2012
Donor must match part family 78100-STX-A33 - requires cloning
Always match the full part number before buying a used module.
PART
78100-STX-A33
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Instrument Panel Cluster (IPC)Verify by VIN201378100-STX-A43
_years covers only 2013 for this generation
Used/donor module guide
Compatible donor years: 2013
Donor must match part family 78100-STX-A43 - requires cloning
Always match the full part number before buying a used module.
PART
78100-STX-A43
CLONE
Yes
NOTES
IPC cloning required for mileage preservation during replacement. Use Launch advanced programming tool or EEPROM programming tool for EEPROM read/write.
Steering Angle Sensor (SAS)Verify by VIN
coding and programming fields are absent or ambiguous
2nd Gen YD2 (2007-2013) common module and ADAS issues
ADAS calibration driftWatch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Rear View Camera and CMBS Forward Camera (Monocular). Year-marked systems apply only to the shown range.
SRS crash-data and warning lightSRS service can involve SRS Control Unit (2007-2011, 2013) and SRS Control Unit (2012). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
Replacement module setupECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
Gateway, key, and immobilizer accessGateway, key, and immobilizer procedures are represented by 3 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
Shared module fitment
Vehicles sharing these modules
These vehicles use one or more indexed replacement modules from this generation.
Yes. Core Auto Logic supports generation-scoped module programming for the Acura MDX (2007-2013). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Acura MDX (2007-2013)?
The Acura MDX (2007-2013) generation currently shows 15 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Unit (2007-2011, 2013) and SRS Control Unit (2012). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 77800STXA820C3 (2007-2011, 2013) - confirm for your exact year/VIN.
Does Acura MDX (2007-2013) need ADAS calibration after glass or collision work?
The merged generation data documents 2 ADAS systems, including Rear View Camera and CMBS Forward Camera (Monocular). Calibration triggers include ECM/PCM Replacement and VSA Module Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Acura MDX (2007-2013)?
Yes. The generation data includes 2 SRS records, including SRS Control Unit (2007-2011, 2013) and SRS Control Unit (2012). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 77800STXA820C3 (2007-2011, 2013) - confirm for your exact year/VIN.
Do all Acura MDX (2007-2013) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2007-2013; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Acura MDX (2007-2013)?
Yes, where the VIN and security workflow support it. The generation data includes 3 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Acura MDX (2007-2013)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Acura MDX (2007-2013) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.