Skip to main content
ADAS Sub-Service

360 Surround-View Camera Stitching Calibration

DFW Mobile ADAS calibration for collision shops, glass installers and alignment bays.

Full four-camera surround view recalibration with OEM floor targets laid out at your shop. Seamless stitching and true guidance lines, documented same day across DFW.

Request Calibration Call a Tech

Onsite only - calibration is on-vehicle. Most quotes are returned in under 4 business hours.

360 Surround-View Camera Stitching Calibration
TARGET / OEM SPEC
Flat-rate pricing - confirmed before any work begins
Quotes are free - no obligation.
Quotes returned in under 4 business hours
Start a Quote

Why Shops Bring 360° Camera Work to Core Auto Logic

Four cameras, one stitched image, zero tolerance for a tilted mount. Surround-view is the most space- and measurement-intensive calibration there is - and the easiest to get visibly wrong.

Request a Quote
OEM Floor Targets, Measured Layout
Factory mat targets placed by measurement around the full perimeter - the geometry the stitching algorithm expects.
OEM SPEC
All Four Cameras as a Set
Every camera re-referenced in one procedure so seams vanish and guidance lines track the real bumper path.
FULL SET
Stitch Verification Documented
Composite alignment confirmed and noted on the signed report alongside the pre- and post-scans.
DOCS
Mobile Service Across the DFW Metroplex
We bring the target boards, tripods and OEM scan tools to your bay. The work order stays with your shop. We confirm any static setup and required road procedure before starting.
Dallas Fort Worth Plano Arlington Irving Frisco McKinney Denton
DFW METRO COVERAGE
DFW ROUTE

How Onsite 360 Surround-View Camera Stitching Calibration Works

ADAS calibration requires the vehicle. We bring targets and software to your DFW location, confirm the workspace, and perform any required static setup and road procedure.

We Come to Your Shop

Mobile tech arrives with OEM Software and Custom Tools, calibration targets and a J2534 interface.

  1. Schedule a visitOnsite work is typically scheduled within 24-48 hours; same-day may be available
  2. Tech arrives on-siteRoute window confirmed before arrival, targets and tooling in the van
  3. Calibrate to OEM specStatic and dynamic procedures per the factory service manual
  4. Verification & reportPost-scan and calibration report before we leave
COVERAGE
DFW Metroplex
Dallas, Fort Worth, Plano, Arlington, Frisco, Irving
Request Calibration

What to have ready

We confirm the vehicle, workspace, and required procedures before scheduling a visit.

  • Your vehicle and repairSend the VIN or year, make, and model, plus what was repaired or replaced. Include a scan report if available.
  • Your service locationTell us the address, available bay space, floor condition, lighting, and alignment status. We confirm the setup required for your vehicle.
  • Your preferred timingRequest a convenient window. Static calibration is performed at the vehicle; a road procedure may also be required.

A quote request does not confirm an appointment. We will confirm scope, price, and availability with you.

What happens next

From your request to completed work and documentation.

  1. Request a Quote - Under 4 Business HoursTell us the vehicle and which corner or camera was touched. Surround-view procedures are floor-space-intensive, so we also confirm your bay dimensions up front.
    Request a Quote - Under 4 Business Hours - Core Auto Logic surround-360-camera-calibration step 1
  2. Schedule On-Site ArrivalWe bring the OEM floor-mat targets and layout tools. The vehicle needs level floor with clear space on all four sides for target placement - we measure and place everything.
    Schedule On-Site Arrival - Core Auto Logic surround-360-camera-calibration step 2
  3. Stitch All Four CamerasTargets are laid at measured positions around the vehicle and the factory routine re-references every camera so the composite stitches seamlessly and guidelines track true.
    Stitch All Four Cameras - Core Auto Logic surround-360-camera-calibration step 3
  4. Documentation DeliveredPre-scan, post-scan, and calibration confirmation delivered with the stitch verification noted on the report.
    Documentation Delivered - Core Auto Logic surround-360-camera-calibration step 4

Frequently Asked Questions

More than any other ADAS procedure - the floor targets lay flat around the entire vehicle, so we typically need a level area several feet beyond each side, front, and rear. A double bay or open shop floor works; we confirm dimensions when you book.
Yes - the system is calibrated as a set. Each camera is referenced to the others to build the seamless top-down composite, so replacing or disturbing one means re-stitching all four.
A casual glance misses small stitch errors that put the guidance lines inches off at the bumper - exactly where customers trust the view most, in tight parking. If a camera was disturbed, the factory procedure is the only way to verify the composite.
Plan on 90-150 minutes on-site depending on platform - layout and measurement of the floor targets is most of the work. Documentation is included as always.
On most platforms, yes - the dynamic guidelines are driven by the same camera referencing. If the platform has a separate rear-camera-only routine we run that too in the same visit.

Everything covered in this service

The agreed work is verified and documented before the job is completed.

OEM Target Kits - Not Generic
TARGET
Factory-specification target kits for Toyota, Honda, Ford, GM, Stellantis, Hyundai, VAG, and Mercedes-Benz. Generic universal targets fail on radar-first and Ethernet-sensor systems.
Insurance-Ready Documentation
DOC
Every calibration includes a pre-scan report, a post-scan confirmation, module version logs, and a signed calibration success code summary acceptable to all major insurance carriers.
Mobile Service - We Come to Your Bay
MOBILE
We bring target boards, measuring tools, and scan tools to your location across the DFW Metroplex. We confirm the required workspace and any static calibration or road procedure before the visit.
Static + Dynamic in One Visit
STATIC-DYN
We handle both the target-board static alignment and any required dynamic drive cycle in one visit so the vehicle leaves your shop road-ready.
10+ Calibration Types Covered
SYSTEMS
Forward camera, front and corner radar, 360° surround-view, backup camera, parking ultrasonic arrays, HUD re-alignment, night vision, and steering-angle reset all in scope.
1-Year Unlimited Guarantee
GUARANTEE
Every calibration is backed by a full one-year unlimited-miles guarantee. If the calibration is the issue, we return and resolve it at no charge.

Common reasons customers book this service

Tap a card to see what triggers this service and which systems are affected.

The side-view cameras live in the mirror housings. Any mirror R&R or replacement changes the camera position, and the surround composite has to be re-stitched against floor targets to line back up.
The front camera sits in the grille or emblem and the rear camera in the tailgate trim. Repair or replacement at either end shifts that camera relative to the other three.
Body repair near any of the four cameras can tilt its mount by a degree or two - invisible on the panel, obvious in the stitched bird's-eye view. One camera out of position breaks the whole composite.
Tools and technical coveragePlatform access, equipment, and procedure details
TOOL CAPABILITY MATRIX

Capable platforms for this work

Representative platforms we use to choose the calibration path, target setup, and subscription access for camera, radar, blind-spot, and surround-view work.

Static and dynamic ADAS calibration
AFTERMARKET PLATFORM
Autel, Launch Tech, Topdon Used when Autel coverage supports the procedure; late-model gaps can still require OE access.
Coverage varies by vehicle
Source basis: Autel, Launch Tech, and Topdon scanner-vendor capability documentation.
ADAS target setup and guided calibration
AFTERMARKET PLATFORM
Autel, Launch Tech, Topdon Useful for guided aftermarket calibration coverage and setup verification.
Coverage varies by vehicle
Source basis: Autel, Launch Tech, and Topdon scanner-vendor capability documentation.
Late-model Ford camera and radar routines
OEM SOFTWARE
Ford FDRS with VCM Factory routines require Ford access when the calibration is not exposed through aftermarket coverage.
No practical workaround
Source basis: Ford Diagnostic and Repair System service software documentation.
ADAS scan, topology, and pre-check support
AFTERMARKET PLATFORM
Autel, Launch Tech, Topdon Used for scan, topology, and ADAS workflow support where coverage is confirmed.
Coverage varies by vehicle
Source basis: Autel, Launch Tech, and Topdon scanner-vendor capability documentation.

Failure Indicators

Symptoms of a surround-view system whose cameras no longer agree.

Visible Stitch Lines
Pavement markings jog sideways at the seams between camera zones in the top-down view.
Guidelines Off Target
Parking guidance lines miss the actual bumper path - the customer notices in the first tight spot.
Distorted Composite
The vehicle outline looks skewed or one quadrant of the bird's-eye view sits tilted.
View Unavailable
The 360° display refuses to load or drops a camera after mirror or body work.

Built around what your shop actually needs.

About this service.

Service guarantee

A 1-year unlimited-mile warranty on our work.

If a defect in our calibration or programming work appears, contact us so we can put it right at no charge. We confirm coverage for your specific job before work begins.

1-Year Unlimited Miles
Coverage for our completed service
Clear Scope and Pricing
Approve the scope and charges before work begins
Workmanship support
Contact us about a defect in our work
Direct Tech Line
Talk with our service team

Ready to get this calibrated and back on the road?

Request onsite calibration in DFW. We confirm the location and appointment after reviewing your request. Most quotes are returned in under 4 business hours.

Request Calibration (945) 382-4065