Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Volkswagen Passat. On this vehicle we cover this A33 platform vehicle. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Platform
A33
Production
2010-2022
Trim Levels
Passat-specific trim/service details require VIN and source review.
Drivetrain
FWD
Engine
-
CAN Speed
-
YEAR-SPECIFIC NOTES
VIN / Build Split
Verify exact Passat trim, drivetrain, engine, and installed safety systems by VIN before service.
SERVICE SNAPSHOT
Exact-year service summary for 2020 Volkswagen Passat
Electronic systems coverage
This 2020 Volkswagen Passat page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2020 Volkswagen Passat using the documented module data on this page.
Common Volkswagen Passat issues we resolve on this platform: Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - A33 platform standard CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No ADAS systems documented for this vehicle.
ECU MODULES
ECU Modules
ECM - Bosch MED17.5.25 - 1.4L TSI CZDAx1
PART
MED17.5.25
MFG
Bosch
PROTOCOL
OBD / BENCH / BOOT
CODING
Yes
CLONE
Verify
CHIP/MCU
TC1782
NOTES
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BENCH / BOOT. Engine: 1.4L TSI CZDA.
ECM - Bosch EDC17C74 - 1.6L TDI DCXAx1
PART
EDC17C74
MFG
Bosch
PROTOCOL
OBD / BENCH / BOOT
CODING
Yes
CLONE
Verify
CHIP/MCU
TC1793
NOTES
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BENCH / BOOT. Engine: 1.6L TDI DCXA.
ECM - Continental SIMOS18.1 - 1.8L TSI CPKAx1
PART
SIMOS18.1
MFG
Continental
PROTOCOL
OBD / BOOT
CODING
Yes
CLONE
Verify
CHIP/MCU
TC1791
NOTES
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BOOT. Engine: 1.8L TSI CPKA.
ECM - Continental SIMOS12.1 - 1.8L TSI CJSAx1
PART
SIMOS12.1
MFG
Continental
PROTOCOL
OBD / BENCH / BOOT
CODING
Yes
CLONE
Verify
CHIP/MCU
TC1797
NOTES
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BENCH / BOOT. Engine: 1.8L TSI CJSA.
ECM - Bosch EDC17CP14 - 2.0L CBAx1
PART
EDC17CP14
MFG
Bosch
PROTOCOL
OBD / BENCH / BOOT
CODING
Yes
CLONE
Verify
CHIP/MCU
TC1796
NOTES
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BENCH / BOOT. Engine: 2.0L CBA.
ECM - Bosch EDC17CP74 - 2.0L TDI SCR DDAAx1
PART
EDC17CP74
MFG
Bosch
PROTOCOL
OBD / BENCH / BOOT
CODING
Yes
CLONE
Verify
CHIP/MCU
TC1793
NOTES
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BENCH / BOOT. Engine: 2.0L TDI SCR DDAA.
ECM - Continental SIMOS18.2 - 2.0L TSI CHHBx1
PART
SIMOS18.2
MFG
Continental
PROTOCOL
OBD / BOOT
CODING
Yes
CLONE
Verify
CHIP/MCU
TC1791
NOTES
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BOOT. Engine: 2.0L TSI CHHB.
ECM - Bosch MED17.1.6 - 3.2L 24 V6 -x1
PART
MED17.1.6
MFG
Bosch
PROTOCOL
OBD / BENCH / BOOT
CODING
Yes
CLONE
Verify
CHIP/MCU
TC1797
NOTES
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BENCH / BOOT. Engine: 3.2L 24 V6 -.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCM - Temic DQ200 G2 - 1.4L TSI CZEADQ200 G2
PART
DQ200 G2
MFG
Temic
PROTOCOL
OBD / BENCH
CODING
Yes
CLONE
Verify
CHIP/MCU
TC1782
NOTES
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BENCH. Engine: 1.4L TSI CZEA.
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BENCH. Engine: 2.0L TDI SCR CUAA.
TCM - Temic DQ200 (MQB) - 2.0L TSI R DNUEDQ200 (MQB)
PART
DQ200 (MQB)
MFG
Temic
PROTOCOL
OBD / BENCH
CODING
Yes
CLONE
Verify
CHIP/MCU
TC1766
NOTES
Cross-checked professional module support evidence. Applies to 2020 within source span 2014-2022. Access methods: OBD / BENCH. Engine: 2.0L TSI R DNUE.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
Body Construction
Midsize sedan unibody; verify repair and calibration procedure by VIN.
OBD Protocol
ISO 15765-4 CAN
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2020 Volkswagen Passat?
ADAS calibration pricing for a 2020 Volkswagen Passat depends on which of its ADAS systems need work after a repair. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2020 Volkswagen Passat?
Yes. The 2020 Volkswagen Passat uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2020 Volkswagen Passat?
After windshield replacement on a 2020 Volkswagen Passat, the forward-facing ADAS camera typically requires recalibration before lane-keep, pre-collision, and adaptive-cruise systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2020 Volkswagen Passat module service take?
Most 2020 Volkswagen Passat onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 13 programmable modules documented in our database (8 ECU, 0 BCM, 5 TCU, 0 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2020 Volkswagen Passat on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2020 Volkswagen Passat. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2020 Volkswagen Passat programming?
Every programming, cloning, and calibration job on the 2020 Volkswagen Passat is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2020 Volkswagen Passat with no working keys (all-keys-lost)?
Yes, our key programming specialists handle all-keys-lost scenarios on the 2020 Volkswagen Passat. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2020 Volkswagen Passat can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2020 Volkswagen Passat. For this vehicle our database documents:
8 engine control (ECU/PCM)
5 transmission control (TCU/TCM)
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2020 Volkswagen Passat covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.