VIN / Build Split
Verify exact Passat trim, drivetrain, engine, and installed safety systems by VIN before service.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
DFW Mobile Service
DFW Serving Dallas / Fort Worth
2013 Volkswagen Passat Supported Services
2013 Volkswagen Passat
ADAS calibration, module programming, and security relearns
Passat-specific trim/service details require VIN and source review.
Technical snapshot
- Platform A33
- CAN Architecture -
- Security -
What do you need fixed?
Choose a service to start your quote.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2013 Volkswagen Passat. On this vehicle we cover this A33 platform vehicle. Mobile across the DFW Metroplex; mail-in module service is available nationwide.
Platform
A33
Production
2010-2022
Trim Levels
Passat-specific trim/service details require VIN and source review.
Drivetrain
FWD
Engine
-
CAN Speed
-
YEAR-SPECIFIC NOTES
Exact-year service summary for 2013 Volkswagen Passat
Electronic systems coverage
This 2013 Volkswagen Passat page does not list sensor-system records yet; module, security, and programming support is confirmed by VIN before service.
View systemsProgrammable modules
This page indexes 11 programmable module records across ECU and TCU/TCM coverage.
View modulesGateway and security
Gateway and immobilizer access is checked by VIN before service.
View securityCore Auto Logic capability
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2013 Volkswagen Passat using the documented module data on this page.
Choose a sectionWhat changes on this exact year
VIN and build split
Verify exact Passat trim, drivetrain, engine, and installed safety systems by VIN before service.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
VW ODIS-S / ODIS-E
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Choose a section to view data
SUPPORTED SYSTEMS
What we service on this vehicle
Documented module coverage for the 2013 Volkswagen Passat. Counts reflect modules our techs have programmed or calibrated on this exact platform.
Engine / ECU Programming
9 modules documented
Powertrain reprogramming, calibration updates, replacement ECU configuration and security access.
Open Modules tabTCU / Transmission
2 modules documented
Transmission control module reprogramming, adaptive learning reset and replacement TCM clone.
Open Modules tabNeed something not listed? Most undocumented modules can still be programmed.
WHAT WE RESOLVE
Common issues on this vehicle
Common Volkswagen Passat issues we resolve on this platform: Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - A33 platform standard CAN.
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
No ADAS systems documented for this vehicle.
ECU Modules
ECM - Bosch MED9.1 - 3.6L FSI BWS 1 record
- Part number
- MED9.1
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- MPC563 / MPC561
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2012-2013. Access methods: OBD / BENCH / BOOT. Engine: 3.6L FSI BWS.
ECM - Bosch MED17.5.20 - 1.4L Turbo CFBA 1 record
- Part number
- MED17.5.20
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1766
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2012-2014. Access methods: OBD / BENCH / BOOT. Engine: 1.4L Turbo CFBA.
ECM - Continental SIMOS PCR2.1 - 1.6L TDI CAYC 1 record
- Part number
- SIMOS PCR2.1
- Manufacturer
- Continental
- Protocol / method
- OBD / BENCH / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1796
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2012-2014. Access methods: OBD / BENCH / BOOT. Engine: 1.6L TDI CAYC.
ECM - Continental SIMOS18.2 - 1.8L TSI CPRA 1 record
- Part number
- SIMOS18.2
- Manufacturer
- Continental
- Protocol / method
- OBD / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1791
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2012-2014. Access methods: OBD / BOOT. Engine: 1.8L TSI CPRA.
ECM - Bosch EDC17CP14 - 2.0L 16v TDI (CR) CFAA 1 record
- Part number
- EDC17CP14
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1796
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2012-2014. Access methods: OBD / BENCH / BOOT. Engine: 2.0L 16v TDI (CR) CFAA.
ECM - Bosch EDC17C46 - 2.0L TDI CR CLLA 1 record
- Part number
- EDC17C46
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1767
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2012-2014. Access methods: OBD / BENCH / BOOT. Engine: 2.0L TDI CR CLLA.
ECM - Bosch MED17.1.6 - 3.6L FSI BWS 1 record
- Part number
- MED17.1.6
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH / BOOT
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1797
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2012-2014. Access methods: OBD / BENCH / BOOT. Engine: 3.6L FSI BWS.
ECM - Bosch MG1CS001 - 2.0L 40 TFSI CZPB 1 record
- Part number
- MG1CS001
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- SPC5777
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2013-2017. Access methods: OBD / BENCH. Engine: 2.0L 40 TFSI CZPB.
ECM - Bosch MG1CS111 - 2.0L 40 TFSI CZPB 1 record
- Part number
- MG1CS111
- Manufacturer
- Bosch
- Protocol / method
- OBD / BENCH
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- SPC5777
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2013-2017. Access methods: OBD / BENCH. Engine: 2.0L 40 TFSI CZPB.
TCU / TCM Transmission Modules
TCM - Temic DQ250 Exx/Fxx - 3.6L FSI BWS DQ250 E
- Part number
- DQ250 E
- Manufacturer
- Temic
- Protocol / method
- OBD / BENCH
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1766
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2012-2013. Access methods: OBD / BENCH. Engine: 3.6L FSI BWS.
TCM - Temic DQ200 G2 - 1.4L TSI CAXA DQ200 G2
- Part number
- DQ200 G2
- Manufacturer
- Temic
- Protocol / method
- OBD / BENCH
- Coding required
- Yes
- Cloning supported
- Verify
- Chip / MCU
- TC1782
- Notes
- Cross-checked professional module support evidence. Applies to 2013 within source span 2012-2014. Access methods: OBD / BENCH. Engine: 1.4L TSI CAXA.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Midsize sedan unibody; verify repair and calibration procedure by VIN.
- OBD Protocol
- ISO 15765-4 CAN
- ECU/TCM Unlocking
- Contact us
- ECU/TCM Flashing
- Contact us
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2013 Volkswagen Passat?
ADAS calibration pricing for a 2013 Volkswagen Passat depends on which of its ADAS systems need work after a repair. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2013 Volkswagen Passat?
Yes. The 2013 Volkswagen Passat uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are available in DFW, and mail-in module service is available nationwide. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2013 Volkswagen Passat?
After windshield replacement on a 2013 Volkswagen Passat, the forward-facing ADAS camera typically requires recalibration before lane-keep, pre-collision, and adaptive-cruise systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in module service is available nationwide for eligible module work.
How long does a 2013 Volkswagen Passat module service take?
Most 2013 Volkswagen Passat onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 11 programmable modules documented in our database (9 ECU, 0 BCM, 2 TCU, 0 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module service is available nationwide.
Do you cover the 2013 Volkswagen Passat on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, post-repair recoding, and supported module work). Mail-in module service is available nationwide. Quote the work and we will confirm the active service path for the 2013 Volkswagen Passat. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2013 Volkswagen Passat programming?
Every programming, cloning, and calibration job on the 2013 Volkswagen Passat is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Which modules on a 2013 Volkswagen Passat can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2013 Volkswagen Passat. For this vehicle our database documents:
- 9 engine control (ECU/PCM)
- 2 transmission control (TCU/TCM)
Send the VIN and the operations performed and we will confirm support and pricing.
Additional Module Part Numbers
Additional OEM-sourced part numbers for the 2013 Volkswagen Passat covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
- ECU / PCM Part Numbers
- MED9.1, MED17.5.20, SIMOS PCR2.1, SIMOS18.2, EDC17CP14, EDC17C46, MED17.1.6, MG1CS001, MG1CS111
- TCU / TCM Part Numbers
- DQ250 E, F - 3.6L FSI BWS, DQ200 G2
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
Hit a security wall? We've got the keys.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
Vehicles sharing modules with the 2013 Volkswagen Passat
These vehicles use one or more of the same replacement modules indexed for this vehicle.
Finish the repair
Need help finishing this repair?
Get onsite help in Dallas-Fort Worth. Ask about same-day availability or a one-time remote session for eligible non-VSP work.
ODIS-S Explore one-time factory coding and programming. We confirm the software and procedure for your vehicle. Module programming & recovery Replacing a module or dealing with a failed programming attempt? Send the part numbers and fault scan for review. Onsite tools & equipment Bring in a technician or ask about hourly, daily and weekly rentals where licensing and equipment availability allow.