No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.
2006 Subaru Outback Supported Services
2006 Subaru Outback
ADAS calibration, module programming, and security relearns
Full ADAS calibration, module programming, and key security work for the 2006 Subaru Outback. Mobile service is available in the Dallas/Fort Worth service area; mail-in is temporarily unavailable.
Technical snapshot
PlatformBP/BL (3rd Gen, 2005-2009)
CAN ArchitectureHS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
Expert ADAS calibration, module programming, and diagnostic recovery for the 2006 Subaru Outback. On this vehicle we cover documented systems include Rear View Camera, this BP/BL (3rd Gen, 2005-2009) platform vehicle, Subaru Immobilizer immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2006 Subaru Outback using the documented module data on this page.
After any airbag deployment, the ACM stores crash data (hard codes). The module must be reset or replaced before the SRS system will function. Our equipment supports hard code clearing on most makes and models without dealer involvement.
Driver Airbag Module
PROTOCOL
None
CLONE
false
NOTES
Steering wheel airbag must be replaced after deployment. Clock spring (spiral cable) must also be inspected and replaced if damaged.
Passenger Airbag Module
PROTOCOL
None
CLONE
false
NOTES
Dashboard passenger airbag must be replaced after deployment. Dashboard assembly typically requires removal for access.
ECU MODULES
ECU Modules
Engine Control Module (ECM) - 2.5L EJ253 SOHC NA (Denso)22611AA840
PART
22611AA840
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2006 Outback BP 2.5i. Same PN family as 2005.
Engine Control Module (ECM) - 2.5L EJ255 DOHC Turbo (Denso)22611AG110
PART
22611AG110
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2006 Outback XT. Same PN family as 2005.
Engine Control Module (ECM) - 3.0L EZ30D H6 DOHC (Denso)22611AJ050
PART
22611AJ050
PROTOCOL
J2534
CODING
Yes
CLONE
No
NOTES
2006 Outback 3.0R. Same PN family as 2005.
BCM MODULES
BCM Modules
Body Integrated Unit (BIU)
NOTES
Subaru BIU. SSM4 coding after replacement.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 4EAT 4-Speed Auto31711AA0
PART
31711AA0
PROTOCOL
Bench
CODING
Yes
CLONE
No
CHIP/MCU
Mitsubishi M32C/87
NOTES
Requires ATF relearn procedure after installation. Use Subaru SSM-III or equivalent. ATF spec: ATF-HP. VIN coding mandatory.
TCU - 5EAT 5-Speed Auto31711AG0
PART
31711AG0
PROTOCOL
Bench
CODING
Yes
CLONE
No
CHIP/MCU
Mitsubishi M32C/87
NOTES
Adaptive learning reset required. Subaru Select Monitor III needed for initialization. ATF spec: ATF-HP. Engine-transmission matching critical.
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/VDC Control Module (ABSCM)
NOTES
Subaru ABS/VDC. SSM4 bleed work support.
Wheel Speed Sensor - Front (each)
NOTES
Active sensor.
Wheel Speed Sensor - Rear (each)
NOTES
Active sensor.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Steering Angle Sensor (SAS)
CODING
Yes
NOTES
INTEGRATED (clock spring / steering column module
Steering Angle Sensor (SAS)
CODING
Yes
NOTES
cross-year extension)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
Factory audio, navigation, Bluetooth, and display equipment - VIN-specificSSM4 OR THE SUBARU PARTS CATALOG
PART
SSM4 OR THE SUBARU PARTS CATALOG
NOTES
Factory audio and navigation equipment varies by year, trim, and package. Verify the exact head unit, display, Bluetooth module, and initialization procedure by VIN before replacement.
Camera, remote start, and convenience equipment - if equippedSSM4 OR THE SUBARU PARTS CATALOG
PART
SSM4 OR THE SUBARU PARTS CATALOG
NOTES
Use Subaru service information and SSM4 where applicable for DTC checks, registration, option configuration, and post-repair function checks. Do not apply later STARLINK or EyeSight procedures without confirming the VIN supports that equipment.
Subaru AM/FM stereo; CD player; Bluetooth (select trims); Aux input
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed Reviewed coverage: 2006 - 2.0L (EE20Z), 2.0L 6MT (EE20Z). Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2006 Subaru Outback?
ADAS calibration pricing for a 2006 Subaru Outback depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2006 Subaru Outback?
Yes. The 2006 Subaru Outback uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2006 Subaru Outback?
After windshield replacement on a 2006 Subaru Outback, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2006 Subaru Outback module service take?
Most 2006 Subaru Outback onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 14 programmable modules documented in our database (3 ECU, 1 BCM, 2 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2006 Subaru Outback on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2006 Subaru Outback. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2006 Subaru Outback programming?
Every programming, cloning, and calibration job on the 2006 Subaru Outback is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2006 Subaru Outback with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2006 Subaru Outback. Immobilizer generation on this platform: Subaru Immobilizer. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2006 Subaru Outback can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2006 Subaru Outback. For this vehicle our database documents:
3 engine control (ECU/PCM)
2 transmission control (TCU/TCM)
1 body control (BCM and related)
3 ABS / brake control (EBCM)
1 immobilizer / security
2 key & fob
2 steering angle sensor (SAS)
1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2006 Subaru Outback covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
ECU / PCM Part Numbers
22611AA840, 22611AG110, 22611AJ050
TCU / TCM Part Numbers
31711AA0, 31711AG0
Transmission Control Module (TCM) Part Numbers
31711AA0, 31711AG0
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.