VIN / Build Split
VIN pos 4-8 identifies model/body/engine. Lexus WMI: JTH, 2T2. Position 4-5 = model code. Position 10 = model year code.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065ADAS, Module Repair & Programming
Multiple trim levels available. ADAS feature availability varies by trim and options package. Contact us for specific trim calibration requirements.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2020 Lexus IS. On this vehicle we cover documented systems include Rear View Camera, this XE30 (3rd Gen - Carryover) platform vehicle, G4 (DST-AES) immobilizer support, Lexus Enform infotainment programming. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
VIN pos 4-8 identifies model/body/engine. Lexus WMI: JTH, 2T2. Position 4-5 = model code. Position 10 = model year code.
Lexus Enform
This 2020 Lexus IS page documents 1 ADAS system, including Rear View Camera.
View ADAS dataDocumented calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and BSM Sensor Replacement. Use the ADAS tab for the full trigger list.
View triggersThis page indexes 17 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, and IPC coverage.
View modulesThis page includes 2 gateway, immobilizer, or key-security records for this 2020 Lexus IS.
View securityCore Auto Logic supports exact-year diagnostics, ADAS calibration, module programming, and security-access planning for the 2020 Lexus IS using the documented systems and module data on this page.
Choose a sectionLexus Safety System+ 2.0 - Available; Immobilizer: G4 (DST-AES) - Standard; Platform: XE30 (3rd Gen - Confirmed
Lexus Safety System+ 2.0
VIN pos 4-8 identifies model/body/engine. Lexus WMI: JTH, 2T2. Position 4-5 = model code. Position 10 = model year code.
Lexus Enform; Lexus Remote Touch - 8-inch
CAN: CAN Bus (HS-CAN, MS-CAN), LIN Bus
Choose a section to view data
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access.
Verify platform code matches when cross-referencing part numbers across model years.
Common Lexus IS issues we resolve on this platform: Rear View Camera recalibration after windshield/bumper/suspension/CCM service. Module programming for replacement ECU/PCM, BCM, TCU, or accessory modules - XE30 (3rd Gen - Carryover) platform uses CAN Bus (HS-CAN, MS-CAN), LIN Bus. Key programming and immobilizer faults - G4 (DST-AES) immobilizer; all-keys-lost supported.
Officially supported (openpilot master)
Gap year: 2020-21 IS not in CARS.md.
Documented for the 3rd Gen XE30 - includes this 2020 model year. Open the full coverage on the generation guide.
ADAS calibration pricing for a 2020 Lexus IS depends on which of its 1 documented systems need work after a repair. This vehicle is documented with Rear View Camera. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs and we return a number within 4 hours.
Yes. The 2020 Lexus IS uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 89170 76100. Bench-only or in-vehicle - both paths are supported. Send the part number and a description of what triggered the light, and we will provide a quote and ETA.
After windshield replacement on a 2020 Lexus IS, Rear View Camera rely on the forward-facing camera and require recalibration before the systems return to operation. We perform the calibration on-site (DFW Metroplex) with OE target fixtures or via mail-in for the front camera/radar module.
Most 2020 Lexus IS jobs complete same-day once the vehicle or module arrives. This vehicle has roughly 10 programmable modules documented in our database (2 ECU, 2 BCM, 1 TCU, 1 ABS, plus IPC/SAS/gateway/accessory). Module-bench work (ECU clones, BCM reprograms, SRS resets) ships back inside 1-3 business days including return shipping. ADAS calibration is on-site for DFW or mail-in for the front module.
Both. We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding) and a mail-in bench for module-only jobs (ECU cloning, BCM repair, SRS reset, TCU clone). Quote the work and we will tell you which path is right for the 2020 Lexus IS.
Every programming, cloning, and calibration job on the 2020 Lexus IS is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Yes - all-keys-lost is supported on the 2020 Lexus IS. Immobilizer generation on this platform: G4 (DST-AES). Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
We program, clone, repair, or replace the full programmable-module stack on a 2020 Lexus IS. For this vehicle our database documents:
Infotainment on this platform: Lexus Enform. Send the VIN and the operations performed and we will confirm support and pricing.
Send your VIN and we'll confirm exact module support and pricing for your specific vehicle within 4 hours.
1-year unlimited warranty on every flash and calibration.
Shared module fitment
These vehicles use one or more of the same replacement modules indexed for this vehicle.