Land Rover Driver Assistance (basic): Electronic Cruise Control, Rear Parking Di
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Use vehicle lookup when you know the year, make, and model. Use quote when the car is in front of you and the symptom matters more than the catalog page.
Check coverage by vehicle, or start with the VIN and symptoms.
Call dispatch: (945) 382-4065Covers model years 2012-2018 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Land Rover Range Rover Evoque built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
The ADAS, module, and security rows below are consolidated across the full 2012-2018 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2012-2018”.
Expert ADAS calibration, module programming, and diagnostic recovery for the 2018 Land Rover Range-Rover-Evoque. On this vehicle we cover documented systems include Rear View Camera (RVC), Blind Spot Monitor - Optional (Static+Dynamic), and PDC - Front and Rear Ultrasonic Parking Sensors, this Land Rover D8 (L538, compact premium platform) platform vehicle, Land Rover Smart Key PEPS; BCM/ECM immobilizer; rolling code (JLR SDD programmed) immobilizer support, OEM-gateway-subscription work handled on our side. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Calibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
Key programming requires manufacturer-level tool access. Add key supported. All keys lost (AKL) supported.
Verify platform code matches when cross-referencing part numbers across model years.
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
JLR SDD / JLR Pathfinder
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required Security gateway access required No practical workaround
Make-level OEM tool map plus exact-year gateway and ADAS fields.
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
This platform uses HS-CAN (500 kbps); JLR MOST/CAN network; OBD2 DLC Pin 6/14 with ISO 15765-4 CAN (500 kbps). A security gateway requires registered tool access.
This page consolidates Land Rover Range Rover Evoque service data for 2012-2018 across 7 model years; 7 years have merged CCT data.
Choose a yearMerged ADAS coverage includes 21 system records, including Rear View Camera (RVC) (2012), Blind Spot Monitor - Optional (Static+Dynamic) (2012), PDC - Front and Rear Ultrasonic Parking Sensors (2012), and Rear View Camera (RVC) (2013). Year-marked systems apply only to the shown range.
View ADAS dataThis generation has 7 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersThe merged generation page indexes 38 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway, immobilizer, and key-security coverage includes 7 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Land Rover Range Rover Evoque 2012-2018 span, with exact-year validation before service.
Get a quoterequired
Forward-facing camera bracket disturbed - static calibration required via JLR SDD followed by road drive dynamic calibration. Forward collision warning and AEB will be disabled until complete.
required
Forward-facing camera bracket disturbed - static calibration required via JLR SDD followed by road drive dynamic calibration. Forward collision warning and AEB will be disabled until complete.
required
Forward-facing camera bracket disturbed - static calibration required via JLR SDD followed by road drive dynamic calibration. Forward collision warning and AEB will be disabled until complete.
required
Front radar (76 GHz) requires static + dynamic recalibration via JLR SDD. ACC and AEB inoperative until calibration complete.
required
Front radar (76 GHz) requires static + dynamic recalibration via JLR SDD. ACC and AEB inoperative until calibration complete.
required
Front radar (76 GHz) requires static + dynamic recalibration via JLR SDD. ACC and AEB inoperative until calibration complete.
required
Front radar (76 GHz) requires static + dynamic recalibration via JLR SDD. ACC and AEB inoperative until calibration complete.
required
Rear cross-traffic radar recalibration via JLR SDD. Rear traffic alert system disabled until complete.
required
Rear cross-traffic radar recalibration via JLR SDD. Rear traffic alert system disabled until complete.
conditional
Blind spot radar sensors in door mirrors require static calibration via JLR SDD if equipped. Verify BSM feature in options file.
conditional
Blind spot radar sensors in door mirrors require static calibration via JLR SDD if equipped. Verify BSM feature in options file.
recommended
Surround-view camera calibration and steering angle sensor reset required via JLR SDD after any suspension geometry change or alignment.
recommended
Surround-view camera calibration and steering angle sensor reset required via JLR SDD after any suspension geometry change or alignment.
recommended
Surround-view camera calibration and steering angle sensor reset required via JLR SDD after any suspension geometry change or alignment.
recommended
Camera lens washer system must be bled and tested. Rain sensor calibration if replaced.
recommended
Camera lens washer system must be bled and tested. Rain sensor calibration if replaced.
recommended
Camera lens washer system must be bled and tested. Rain sensor calibration if replaced.
required
Terrain Response 2 calibration required after transfer case module replacement. Use JLR SDD for calibration sequence.
required
Terrain Response 2 calibration required after transfer case module replacement. Use JLR SDD for calibration sequence.
| Year | Trim notes |
|---|---|
| 2012 | Range Rover Evoque L538 platform (1st gen); Si4/eD4 engines. |
| 2013 | Range Rover Evoque L538 platform (1st gen); Si4/eD4 engines. |
| 2014 | Range Rover Evoque L538 platform (1st gen); Si4/eD4 engines. |
| 2015 | Range Rover Evoque L538 platform (1st gen); Si4/eD4 engines. |
| 2016 | Range Rover Evoque L538 platform (1st gen); Si4/eD4 engines. |
| 2017 | Range Rover Evoque L538 platform (1st gen); Si4/eD4 engines. |
| 2018 | Range Rover Evoque L538 platform (1st gen); Si4/eD4 engines. |
21 ADAS systems documented across 2012-2018. Rows that apply to only part of the generation carry a year badge.
Land Rover Driver Assistance (basic): Electronic Cruise Control, Rear Parking Distance Control, optional Rear View Camera, optional Hill Descent Control
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Rear View Camera (RVC) 2012 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitor - Optional (Static+Dynamic) 2012 | Side Radar | Radar | Static + Dynamic | YES | - | |
| PDC - Front and Rear Ultrasonic Parking Sensors 2012 | Parking Sensor | Ultrasonic | None | YES | - | |
| Rear View Camera (RVC) 2013 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitor - Optional (Static+Dynamic) 2013 | Side Radar | Radar | Static + Dynamic | YES | - | |
| PDC - Front and Rear Ultrasonic Parking Sensors 2013 | Parking Sensor | Ultrasonic | None | YES | - | |
| Rear View Camera (RVC) 2014 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitor - Optional (Static+Dynamic) 2014 | Side Radar | Radar | Static + Dynamic | YES | - | |
| PDC - Front and Rear Ultrasonic Parking Sensors 2014 | Parking Sensor | Ultrasonic | None | YES | - | |
| Rear View Camera (RVC) 2015 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitor - Optional (Static+Dynamic) 2015 | Side Radar | Radar | Static + Dynamic | YES | - | |
| PDC - Front and Rear Ultrasonic Parking Sensors 2015 | Parking Sensor | Ultrasonic | None | YES | - | |
| Rear View Camera (RVC) 2016 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitor - Optional (Static+Dynamic) 2016 | Side Radar | Radar | Static + Dynamic | YES | - | |
| PDC - Front and Rear Ultrasonic Parking Sensors 2016 | Parking Sensor | Ultrasonic | None | YES | - | |
| Rear View Camera (RVC) 2017 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitor - Optional (Static+Dynamic) 2017 | Side Radar | Radar | Static + Dynamic | YES | - | |
| PDC - Front and Rear Ultrasonic Parking Sensors 2017 | Parking Sensor | Ultrasonic | None | YES | - | |
| Rear View Camera (RVC) 2018 | Rear Camera | Camera | None | YES | - | |
| Blind Spot Monitor - Optional (Static+Dynamic) 2018 | Side Radar | Radar | Static + Dynamic | YES | - | |
| PDC - Front and Rear Ultrasonic Parking Sensors 2018 | Parking Sensor | Ultrasonic | None | YES | - |
ADAS SYSTEM
Need this calibrated?
Get a quote for ADAS calibrationForward-facing camera bracket disturbed - static calibration required via JLR SDD followed by road drive dynamic calibration. Forward collision warning and AEB will be disabled until complete.
Front radar (76 GHz) requires static + dynamic recalibration via JLR SDD. ACC and AEB inoperative until calibration complete.
Rear cross-traffic radar recalibration via JLR SDD. Rear traffic alert system disabled until complete.
Blind spot radar sensors in door mirrors require static calibration via JLR SDD if equipped. Verify BSM feature in options file.
Surround-view camera calibration and steering angle sensor reset required via JLR SDD after any suspension geometry change or alignment.
Camera lens washer system must be bled and tested. Rain sensor calibration if replaced.
Terrain Response 2 calibration required after transfer case module replacement. Use JLR SDD for calibration sequence.
38 documented Land Rover Range Rover Evoque modules across 2012-2018. Open a group for part numbers, programming protocol, security notes, and clone support.
_years covers only 2012 for this generation
Compatible donor years: 2012
Always match the full part number before buying a used module.
_years covers only 2013 for this generation
Compatible donor years: 2013
Always match the full part number before buying a used module.
_years covers only 2014 for this generation
Compatible donor years: 2014
Always match the full part number before buying a used module.
_years covers only 2015 for this generation
Compatible donor years: 2015
Always match the full part number before buying a used module.
_years covers only 2016 for this generation
Compatible donor years: 2016
Always match the full part number before buying a used module.
_years covers only 2017 for this generation
Compatible donor years: 2017
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2012-2014 for this generation
Compatible donor years: 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2017 for this generation
Compatible donor years: 2015, 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2012-2014 for this generation
Compatible donor years: 2012, 2013, 2014
Always match the full part number before buying a used module.
_years covers only 2015-2017 for this generation
Compatible donor years: 2015, 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
_years covers only 2012-2017 for this generation
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
gateway_type and gateway_subscription_required require registered access
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
gateway_type and gateway_subscription_required require registered access
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2012-2013 for this generation
Compatible donor years: 2012, 2013
Always match the full part number before buying a used module.
_years covers only 2014-2015 for this generation
Compatible donor years: 2014, 2015
Donor must match part family LR073 - requires cloning
Always match the full part number before buying a used module.
_years covers only 2016-2017 for this generation
Compatible donor years: 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
gateway_type and gateway_subscription_required require registered access
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2012 for this generation
Compatible donor years: 2012
Donor must match part family BJ32-10849-AC - requires cloning
Always match the full part number before buying a used module.
_years covers only 2013 for this generation
Compatible donor years: 2013
Donor must match part family CJ32-10849-AC - requires cloning
Always match the full part number before buying a used module.
_years covers only 2014 for this generation
Compatible donor years: 2014
Donor must match part family DJ32-10849-AC - requires cloning
Always match the full part number before buying a used module.
_years covers only 2015-2018 for this generation
Compatible donor years: 2015, 2016, 2017, 2018
Donor must match part family LR033016 - requires cloning
Always match the full part number before buying a used module.
gateway_type and gateway_subscription_required require registered access
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
gateway_type and gateway_subscription_required require registered access
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
gateway_type and gateway_subscription_required require registered access
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
gateway_type and gateway_subscription_required require registered access
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
gateway_type and gateway_subscription_required require registered access
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
_years covers only 2015-2017 for this generation
Compatible donor years: 2015, 2016, 2017
Always match the full part number before buying a used module.
_years covers only 2018 for this generation
Compatible donor years: 2018
Always match the full part number before buying a used module.
7 gateway, immobilizer, and security items documented across 2012-2018.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
vin_locked indicates immobilizer or VIN security
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
Land Rover Smart Key (PEPS); rolling code transponder; JLR SDD programmed
gateway_type and gateway_subscription_required require registered access
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
gateway_type and gateway_subscription_required require registered access
Compatible donor years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Always match the full part number before buying a used module.
Land Rover Smart Key PEPS; BCM/ECM immobilizer; rolling code (JLR SDD system. Topix/SDD (JLR Pathfinder) required for key programming and module replacement. Pin extraction: limited (aes encryption); akl supported.
Yes. Core Auto Logic supports generation-scoped module programming for the Land Rover Range Rover Evoque (2012-2018). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
The Land Rover Range Rover Evoque (2012-2018) generation currently shows 22 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Module (Airbag ECU / RCM) (2012), SRS Control Module (Airbag ECU / RCM) (2013), and SRS Control Module (Airbag ECU / RCM) (2014). Part numbers and module variants must be confirmed for your exact year/VIN.
The merged generation data documents 21 ADAS systems, including Rear View Camera (RVC) (2012), Blind Spot Monitor - Optional (Static+Dynamic) (2012), PDC - Front and Rear Ultrasonic Parking Sensors (2012), Rear View Camera (RVC) (2013), and Blind Spot Monitor - Optional (Static+Dynamic) (2013). Calibration triggers include Windshield replacement (2012-2014, 2017-2018), Front bumper removal / front radar disturbed (2012-2014, 2017-2018), Rear bumper removal / rear radar disturbed (2012-2014, 2017-2018), and Door mirror removal (wing mirror replacement) (2012-2014, 2017-2018). Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Yes. The generation data includes 7 SRS records, including SRS Control Module (Airbag ECU / RCM) (2012), SRS Control Module (Airbag ECU / RCM) (2013), and SRS Control Module (Airbag ECU / RCM) (2014). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN.
No assumption should be made across the full span. The generation page merges rows across 2012-2018; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Yes, where the VIN and security workflow support it. The generation data includes 7 gateway, immobilizer, or key-security records. Gateway examples include Central Gateway Module. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.