Hyundai SmartSense: Forward Collision Alert, Lane Keeping Assist, Lane Following
AvailableCalibration required after windshield replacement, camera/radar service, or structural repair affecting sensor alignment.
3,200+ Vehicles Supported
1-Year Unlimited Guarantee
Same-Day Mobile Service
DFW Serving Dallas / Fort Worth
2025-2026 Hyundai Sonata Generation Guide
Hyundai Sonata 8th Gen DN8 (2025-2026) ADAS Calibration & Module Programming
Covers model years 2025-2026 - one service guide for the whole generation.
Full ADAS calibration, module programming, and key security work for every Hyundai Sonata built on this platform. Same-day mobile service across the Dallas/Fort Worth metroplex; mail-in accepted nationwide.
- Platform DN8 (8th Gen, 2020+)
- CAN Architecture Hyundai CAN FD (ISO 15765-4)
- Security Hyundai IMMO4 AES-128; no OBD pin extraction; AKL requires gds2 + dealer authorization
The ADAS, module, and security rows below are consolidated across the full 2025-2026 generation. A year badge marks rows that apply only to part of the span; rows without a badge apply to every year. Year-specific differences are summarized under “What changes across 2025-2026”.
OVERVIEW
Expert ADAS calibration, module programming, and diagnostic recovery for the 2025 Hyundai Sonata. On this vehicle we cover documented systems include Forward Camera (Monocular), Forward Radar (77GHz), and Blind Spot Monitor Sensor - Left (BSM), this DN8 (8th Gen, 2020+) platform vehicle, Hyundai IMMO4 (AES-128) immobilizer support. Mobile across the DFW Metroplex, mail-in nationwide for module-bench work.
Platform
DN8 (8th Gen, 2020+)
Production
2015-present
Trim Levels
All trims equipped with Hyundai SmartSense™ require forward camera recalibration after windshield replacement. Use GDS-Mobile to confirm trim-level ADAS package and complete calibration procedure per OEM specification.
Drivetrain
FWD
Engine
-
CAN Speed
Hyundai CAN FD (ISO 15765-4)
Feature availability 3
Immobilizer: Hyundai IMMO4 (AES-128)
StandardKey programming requires manufacturer-level tool access.
Platform: DN8 (8th Gen, 2020+)
ConfirmedVerify platform code matches when cross-referencing part numbers across model years.
Tool access for this exact year
Representative tool access paths for this exact model year, gated by the vehicle data and source packet we currently trust.
Factory scan, coding, and calibration access
Hyundai GDS Mobile / Hyundai KDS
Factory routines and secure server authorization control this path when aftermarket coverage is not enough for the VIN.
OEM subscription required
Make-level OEM tool map plus exact-year gateway and ADAS fields.
ADAS scan, setup, and verification
Autel, Launch Tech, Topdon
Used where aftermarket coverage supports the procedure; OEM software remains required for locked factory routines.
Tool subscription required
Service-level scanner-vendor source packet plus exact-year ADAS records.
Bench cloning and chip-level recovery
Alientech / Autotuner / Orange5 / Scanmatik / Flex / VVDI2 / PCMFlash / CGDI / X-Prog
Used only when the module, donor data, EEPROM, MCU, or crash-data workflow requires bench or chip-level handling.
Bench/chip-level only
Bench programmer source packet plus exact-year module/security records.
Know this platform
This platform uses Hyundai CAN FD (ISO 15765-4) with ISO 15765-4 CAN (500 kbps).
- CAN
- Hyundai CAN FD (ISO 15765-4)
- OBD
- ISO 15765-4 CAN (500 kbps)
OPENPILOT / COMMA.AI
Openpilot Compatibility
Not Supported
Not supported - 2025 outside openpilot year range (2018-2023)
Not in openpilot support tree as of April 2026. Supported years: 2018-2023. 2020-23 use Hyundai A harness. Hybrid supported. 2024+ not yet in tree.
Generation service summary for Hyundai Sonata 8th Gen DN8 (2025-2026)
Generation coverage
This page consolidates Hyundai Sonata service data for 2025-2026 across 2 model years; 2 years have merged CCT data.
Choose a yearADAS coverage
Merged ADAS coverage includes 4 system records, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM). Year-marked systems apply only to the shown range.
View ADAS dataCalibration triggers
This generation has 9 merged calibration trigger records. Trigger applicability can vary by year - verify by VIN before setup.
View triggersProgrammable modules
The merged generation page indexes 25 programmable module records across SRS, ECU, BCM, TCU/TCM, ABS, IPC coverage. Part numbers are confirmed for the exact year/VIN.
View modulesGateway and security
Gateway, immobilizer, and key-security coverage includes 2 merged records. Security procedures vary by year - verify by VIN.
View securityCore Auto Logic capability
Core Auto Logic supports generation-level diagnostics, ADAS calibration, module programming, security-access planning, and mail-in bench work for the Hyundai Sonata 2025-2026 span, with exact-year validation before service.
Get a quoteDo I need calibration?
Windshield Replacement 5
Forward Camera
2025-2026required
Static ADAS calibration via gds2. Target ~2.5m (verify in gds2).
FCA
2025-2026required
Static ADAS calibration via gds2. Target ~2.5m (verify in gds2).
LKA
2025-2026required
Static ADAS calibration via gds2. Target ~2.5m (verify in gds2).
LFA
2025-2026required
Static ADAS calibration via gds2. Target ~2.5m (verify in gds2).
HDA
2025-2026required
Static ADAS calibration via gds2. Target ~2.5m (verify in gds2).
Front Bumper Repair 4
Forward Radar
2025-2026required
gds2 radar alignment. Bracket inspection.
FCA
2025-2026required
gds2 radar alignment. Bracket inspection.
Smart Cruise
2025-2026required
gds2 radar alignment. Bracket inspection.
HDA
2025-2026required
gds2 radar alignment. Bracket inspection.
Rear Bumper Repair 1
BSD Radar L/R
2025-2026required
gds2 BSD initialization if sensors disturbed.
Any Module Replacement 5
BCM
2025-2026required
gds2 PMI + VIN coding. IMMO4 on ECM.
ECM
2025-2026required
gds2 PMI + VIN coding. IMMO4 on ECM.
SRS ECU
2025-2026required
gds2 PMI + VIN coding. IMMO4 on ECM.
TCM
2025-2026required
gds2 PMI + VIN coding. IMMO4 on ECM.
ABS
2025-2026required
gds2 PMI + VIN coding. IMMO4 on ECM.
Forward Camera Replacement 1
2025-2026
Yes
Camera module replacement requires full recalibration using GDS Mobile.
Any Front-End Collision 1
2025-2026
Yes
Inspect and recalibrate forward camera after any front-end collision using GDS Mobile.
Forward Radar Replacement 1
2025-2026
Yes
Radar module replacement requires alignment/calibration using GDS Mobile.
BSM Sensor Replacement 1
2025-2026
Yes
Blind spot monitoring sensor replacement requires calibration using GDS Mobile.
Mirror Replacement 1
2025-2026
Conditional
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS Mobile if applicable.
Year-by-year details
| Year | Trim notes |
|---|---|
| 2025 | All trims equipped with Hyundai SmartSense™ require forward camera recalibration after windshield replacement. Use GDS-Mobile to confirm trim-level ADAS package and complete calibration procedure per OEM specification. |
| 2026 | All trims equipped with Hyundai SmartSense™ require forward camera recalibration after windshield replacement. Use GDS-Mobile to confirm trim-level ADAS package and complete calibration procedure per OEM specification. |
4 ADAS systems documented across 2025-2026. Rows that apply to only part of the generation carry a year badge.
Filter by year
ADAS CALIBRATION MATRIX
ADAS systems on this vehicle
Hyundai SmartSense: Forward Collision Alert, Lane Keeping Assist, Lane Following Assist, Highway Driving Assist (SEL+), Blind-Spot Collision Warning, Rear Cross-Traffic Collision Avoidance, RSPA (Limited), Driver Attention Warning
Scroll for part numbers and Details
| System | Type | Category | Cal. Type | Supported | Part # | Actions |
|---|---|---|---|---|---|---|
| Forward Camera (Monocular) | Forward Camera | Camera | Static | YES | ~99211-L0 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Forward Radar (77GHz) | Front Radar | Radar | Static | YES | ~99110-L0 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Left (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~99140-L0 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) | |
| Blind Spot Monitor Sensor - Right (BSM) | Side Radar | Radar | Static + Dynamic | YES | ~99150-L0 (VERIFY VIA OUR DIAGNOSTIC SOFTWARE) |
ADAS SYSTEM
YES Supported
Identification
- System type
- Module category
- Sensor location
Part Numbers
- OEM
- Alternative
Calibration & Triggers
- Calibration type
- Programming approach
- Requires PMI
- Trigger events
Technical Notes
- Chip / MCU
- Service notes
Need this calibrated?
Get a quote for ADAS calibration WHEN IS CALIBRATION REQUIRED?
Triggers for ADAS recalibration
Windshield Replacement Affected: Forward Camera, FCA, LKA, LFA, HDA
Static ADAS calibration via gds2. Target ~2.5m (verify in gds2).
Front Bumper Repair Affected: Forward Radar, FCA, Smart Cruise, HDA
gds2 radar alignment. Bracket inspection.
Rear Bumper Repair Affected: BSD Radar L/R
gds2 BSD initialization if sensors disturbed.
Any Module Replacement Affected: BCM, ECM, SRS ECU, TCM, ABS
gds2 PMI + VIN coding. IMMO4 on ECM.
Forward Camera Replacement
Camera module replacement requires full recalibration using GDS Mobile.
Any Front-End Collision
Inspect and recalibrate forward camera after any front-end collision using GDS Mobile.
Forward Radar Replacement
Radar module replacement requires alignment/calibration using GDS Mobile.
BSM Sensor Replacement
Blind spot monitoring sensor replacement requires calibration using GDS Mobile.
Mirror Replacement
If BSD sensor is mirror-integrated, recalibration required. Verify sensor location; use GDS Mobile if applicable.
Modules we program on this generation
25 documented Hyundai Sonata modules across 2025-2026. Open a group for part numbers, programming protocol, security notes, and clone support.
SRS MODULES
SRS Modules
SRS Control Module (SRSCM) x12
80200L1000 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 80200L1000
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
80100L1500YTH Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 80100L1500YTH
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
80420L1000 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 80420L1000
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
80410L1000 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 80410L1000
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
1338508001 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1338508001
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
1125406201 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1125406201
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
80100L1500NNB Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 80100L1500NNB
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
1339606007K Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1339606007K
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
1339506001 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1339506001
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
1327106001 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1327106001
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
80310L5000 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 80310L5000
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
1125606201 Verify by VIN Under center console
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 1125606201
- LOCATION
- Under center console
- MFG
- Continental
- NOTES
- Requires GDS or compatible scan tool. SRSCM VIN write required. Clear DTCs after installation. Battery disconnect required.
ECU MODULES
ECU Modules
ECM - 2.5L GDI (G4KL) Bench clone required ~39101-2M (VERIFY VIA GDS2)
clone_supported indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2025, 2026
Donor must match part family ~39101-2M (VERIFY VIA GDS2) - requires cloning
Always match the full part number before buying a used module.
- PART
- ~39101-2M (VERIFY VIA GDS2)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch ME17
- NOTES
- gds2 ECM + VIN + IMMO4. Throttle idle learn.
ECM - 1.6T (G4FJ) Bench clone required ~39101-2B (VERIFY VIA GDS2)
clone_supported indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2025, 2026
Donor must match part family ~39101-2B (VERIFY VIA GDS2) - requires cloning
Always match the full part number before buying a used module.
- PART
- ~39101-2B (VERIFY VIA GDS2)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Bosch ME17
- NOTES
- gds2 ECM + VIN + IMMO4.
TCM - 8AT or 7DCT Bench clone required ~954 (VERIFY VIA GDS2)
clone_supported indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2025, 2026
Donor must match part family ~954 (VERIFY VIA GDS2) - requires cloning
Always match the full part number before buying a used module.
- PART
- ~954 (VERIFY VIA GDS2)
- PROTOCOL
- OBD Programming Port
- CODING
- Yes
- CLONE
- Yes
- CHIP/MCU
- Hyundai-Kia OEM
- NOTES
- gds2 TCM + adaptive reset.
BCM MODULES
BCM Modules
Body Control Module (BCM) Bench clone required ~95400-L0 (VERIFY VIA GDS2)
clone_supported indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2025, 2026
Donor must match part family ~95400-L0 (VERIFY VIA GDS2) - requires cloning
Always match the full part number before buying a used module.
- PART
- ~95400-L0 (VERIFY VIA GDS2)
- SECURITY
- AES-128
- CODING
- Yes
- CLONE
- Yes
- NOTES
- gds2 programming + variant config. VIN-tie required.
Smart Key ECU Verify by VIN ~95480-L0 (VERIFY VIA GDS2)
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- ~95480-L0 (VERIFY VIA GDS2)
- SECURITY
- AES-128
- CODING
- Yes
- CLONE
- No
- NOTES
- gds2 + Hyundai dealer auth. All keys erased on replacement.
TCU / TCM TRANSMISSION MODULES
TCU / TCM Transmission Modules
TCU - 8DCT 8-Speed DCT Verify by VIN 95440-L1
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- 95440-L1
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Continental TC1797
- NOTES
- Requires GDS-II tool, VIN coding, clutch adaptation, ATF SP-IV-RR fluid spec
TCU - 6AT 6-Speed Auto Verify by VIN 2025 95440-L0
_years covers only 2025 for this generation
Used/donor module guide
Compatible donor years: 2025
Always match the full part number before buying a used module.
- PART
- 95440-L0
- PROTOCOL
- J2534
- CODING
- Yes
- CLONE
- No
- CHIP/MCU
- Bosch TC1797
- NOTES
- Requires GDS-II tool, VIN coding, shift adaptation, ATF SP-IV fluid spec
ABS / BRAKE MODULES
ABS / Brake Modules
ABS/ESC Module Bench clone required ~58920-L0 (VERIFY VIA GDS2)
clone_supported indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2025, 2026
Donor must match part family ~58920-L0 (VERIFY VIA GDS2) - requires cloning
Always match the full part number before buying a used module.
- PART
- ~58920-L0 (VERIFY VIA GDS2)
- CLONE
- Yes
- NOTES
- gds2 initialization. Power bleed. SAS zero-point calibration after replacement or alignment.
OTHER MODULES (IPC, SAS)
Other Modules (IPC, SAS)
Instrument Panel Cluster (IPC) Bench clone required 94013-L0010
clone_supported indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2025, 2026
Donor must match part family 94013-L0010 - requires cloning
Always match the full part number before buying a used module.
- PART
- 94013-L0010
- CLONE
- Yes
- NOTES
- DN8 IPC 10.25" digital cluster standard
Instrument Panel Cluster (IPC) Bench clone required 94013-L0020
clone_supported indicates cloning or bench work
Used/donor module guide
Compatible donor years: 2025, 2026
Donor must match part family 94013-L0020 - requires cloning
Always match the full part number before buying a used module.
- PART
- 94013-L0020
- CLONE
- Yes
- NOTES
- DN8 IPC 12.3" digital cluster SEL Plus/Limited
Steering Angle Sensor (SAS) Verify by VIN
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- CODING
- Yes
- NOTES
- INTEGRATED (SCM)
CONNECTIVITY & ACCESSORIES
Connectivity & Accessories
10.25" Head Unit Verify by VIN OEM - VERIFY VIA GDS2
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- OEM - VERIFY VIA GDS2
- NOTES
- gds2 variant config. Bluelink OTA.
IPC (Instrument Panel Cluster) Verify by VIN ~94013-L0 (VERIFY VIA GDS2)
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- ~94013-L0 (VERIFY VIA GDS2)
- NOTES
- gds2 programming + VIN write.
2 gateway, immobilizer, and security items documented across 2025-2026.
KEY SECURITY & IMMOBILIZER
Key Security & Immobilizer
- System Hyundai IMMO4 (AES-128)
- Add Key Yes
- All Keys Lost Yes
Hyundai IMMO4 AES-128; no OBD pin extraction; AKL requires gds2 + dealer authorization
IMMOBILIZER MODULES
Immobilizer Modules
IMMO4 - Hyundai Transponder Immobilizer Dealer security required
security_type indicates immobilizer or VIN security
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- SECURITY
- AES-128
- NOTES
- No OBD pin extraction. gds2 + Hyundai dealer auth. ECM requires IMMO4 coding.
KEY & FOB TYPES
Key & Fob Types
Proximity Smart Key Fob Verify by VIN ~95440-L0 (VERIFY VIA GDS2)
coding and programming fields are absent or ambiguous
Used/donor module guide
Compatible donor years: 2025, 2026
Always match the full part number before buying a used module.
- PART
- ~95440-L0 (VERIFY VIA GDS2)
- NOTES
- IMMO4 AES-128. gds2 + Hyundai dealer auth. Min 2 keys.
Replacement Notes
Hyundai IMMO4 (AES-128) system. GDS/SmartKey (KDS) required for key programming and module replacement. No obd pin extraction; akl supported.
ARCHITECTURE & CONNECTIVITY
Architecture & Connectivity
- Body Construction
- Advanced high-strength steel (AHSS) unibody; hot-stamped steel
- OBD Protocol
- ISO 15765-4 CAN (500 kbps)
- CAN Architecture
- Hyundai CAN FD (ISO 15765-4)
- Infotainment
- 10.25" touchscreen; Hyundai Bluelink OTA; wireless CarPlay/Android Auto
- OTA Capable
- Yes
- ECU Unlock Supported
- Yes
- Custom Programming
- Yes
WHAT WE RESOLVE
8th Gen DN8 (2025-2026) common module and ADAS issues
- ADAS calibration drift Watch for calibration needs after windshield, bumper, suspension, camera, or radar work. Documented systems include Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM). Year-marked systems apply only to the shown range.
- SRS crash-data and warning light SRS service can involve SRS Control Module (SRSCM). Part numbers and crash-data workflow are confirmed for the exact year/VIN.
- Replacement module setup ECU/PCM replacement programming, BCM configuration, TCU/TCM cloning, ABS/EBCM setup are represented in the merged generation data. Rows with year ranges do not apply to every model year; verify by VIN.
- Gateway, key, and immobilizer access Gateway, key, and immobilizer procedures are represented by 2 merged security records. Access and all-keys-lost support varies by year - verify by VIN.
FREQUENTLY ASKED QUESTIONS
FAQ
Can you program Hyundai Sonata (2025-2026) modules?
Yes. Core Auto Logic supports generation-scoped module programming for the Hyundai Sonata (2025-2026). The merged generation data includes ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS coverage. Rows marked with a year range apply only to that part of the span; unmarked rows are present across the merged generation data.
Which modules are documented for Hyundai Sonata (2025-2026)?
The Hyundai Sonata (2025-2026) generation currently shows 20 core module records across ECU/PCM, BCM, TCU/TCM, ABS/EBCM, and SRS groups. SRS examples include SRS Control Module (SRSCM). Part numbers and module variants must be confirmed for your exact year/VIN. Reference part number: 80200L1000 - confirm for your exact year/VIN.
Does Hyundai Sonata (2025-2026) need ADAS calibration after glass or collision work?
The merged generation data documents 4 ADAS systems, including Forward Camera (Monocular), Forward Radar (77GHz), Blind Spot Monitor Sensor - Left (BSM), and Blind Spot Monitor Sensor - Right (BSM). Calibration triggers include Windshield Replacement, Front Bumper Repair, Rear Bumper Repair, and Any Module Replacement. Procedure type is VIN-specific scan-tool procedure; verify exact requirements by VIN before setup.
Can you reset the airbag module on Hyundai Sonata (2025-2026)?
Yes. The generation data includes 12 SRS records, including SRS Control Module (SRSCM). Bench reset, cloning, and replacement setup are handled after part-number review. Any SRS part number shown for this generation is planning data only - confirm for your exact year/VIN. Reference part number: 80200L1000 - confirm for your exact year/VIN.
Do all Hyundai Sonata (2025-2026) years use the same parts?
No assumption should be made across the full span. The generation page merges rows across 2025-2026; any row that does not span all data-bearing years is printed with its year range or treated as varies by year - verify by VIN. Part numbers always require exact year/VIN confirmation before ordering, cloning, or programming.
Can you program keys or immobilizer systems for Hyundai Sonata (2025-2026)?
Yes, where the VIN and security workflow support it. The generation data includes 2 gateway, immobilizer, or key-security records. Key records are present in the merged generation data. Security access, all-keys-lost eligibility, and add-key workflows vary by year - verify by VIN.
How long does service take for Hyundai Sonata (2025-2026)?
Most programming, cloning, SRS, and calibration jobs are quoted after VIN, DTC, part number, and repair-scope review. Labor time varies by year - verify by VIN before scheduling. Mail-in module work typically depends on module condition, donor data, and shipping window.
Is Hyundai Sonata (2025-2026) service mobile or mail-in?
Both paths are available depending on the job. Mobile service covers DFW on-vehicle diagnostics, ADAS setup, key programming, and post-repair coding. Mail-in service covers ECU, BCM, SRS, TCU, ABS, and other bench module work nationwide. We confirm the correct path for your exact year/VIN before scheduling.