No ADAS systems detected on this vehicle. Want to switch to Onsite Diagnostics? Most non-ADAS issues are diagnosed and resolved in a single visit.
2007 GMC Yukon Supported Services
2007 GMC Yukon
ADAS calibration, module programming, and security relearns
Full ADAS calibration, module programming, and key security work for the 2007 GMC Yukon. Mobile service is available in the Dallas/Fort Worth service area; mail-in is temporarily unavailable.
Technical snapshot
PlatformGMT900 (3rd Gen, 2007-2014)
CAN ArchitectureHS-CAN (500 kbps) - ISO 15765-4 compliant; OBD2 DLC Pin 6/14
SecurityGM PASSKey III / PassLock II (BCM security seed); resistor pellet or PassLock cylinder sensor; PIN via Tech 2 or GDS2; AKL requires BCM relearn procedure + security PIN
Expert ADAS calibration, module programming, and diagnostic recovery for the 2007 GMC Yukon. On this vehicle we cover documented systems include No Factory ADAS Systems, this GMT900 (3rd Gen, 2007-2014) platform vehicle, PK3/PK3+ / PEPS immobilizer support. Mobile across the DFW Metroplex; mail-in module work is temporarily unavailable.
Core Auto Logic supports exact-year diagnostics, module programming, and security-access planning for the 2007 GMC Yukon using the documented module data on this page.
Active OnStar required for Super Cruise, OTA updates, and remote features. Modem VIN-tied.
Super Cruise System (Denali Ultimate RPO KSG)
NOTES
Hands-free highway driving. Requires RPO KSG in BCM. GDS2 + TIS2WEB initialization after sensor replacement. LiDAR map data and active OnStar required.
GMC AM/FM stereo; CD player; OnStar; Bluetooth (select trims); Aux input
OTA Capable
No
ECU/TCM Unlocking
Contact us
ECU/TCM Flashing
Confirmed Reviewed coverage: 2007 - 4.8L V8 16v (LY2), 5.3L V8 16v (LY5), 6.0L V8 16v MHEV (LFA), 6.0L V8 16v MHEV (LZ1). Confirm the exact engine, ECU, and any prerequisite access method before service.
FREQUENTLY ASKED QUESTIONS
FAQ
How much does ADAS calibration cost for a 2007 GMC Yukon?
ADAS calibration pricing for a 2007 GMC Yukon depends on which of its 1 documented systems need work after a repair. This vehicle is documented with No Factory ADAS Systems. We provide a fixed quote after confirming the operations performed - send the VIN, the repair scope (windshield R&R, bumper work, alignment, collision), and any DTCs so the quote response can include a real number.
Can you reset the airbag light on a 2007 GMC Yukon?
Yes. The 2007 GMC Yukon uses a factory SRS control module that we support. We read and clear stored crash data, then restore the module to factory status so the airbag warning light goes out and the system returns to full operation. Reference part number on this vehicle: 25966963. Mobile diagnosis and programming are the active service path. Mail-in bench intake is temporarily unavailable. Send the part number and a description of what triggered the light, and we will provide a quote and scheduling window.
What is needed after replacing the windshield on a 2007 GMC Yukon?
After windshield replacement on a 2007 GMC Yukon, the forward-facing ADAS camera typically requires recalibration before lane-keep, pre-collision, and adaptive-cruise systems return to operation. We perform the calibration on-site in the DFW Metroplex with OE target fixtures. Mail-in intake is temporarily unavailable.
How long does a 2007 GMC Yukon module service take?
Most 2007 GMC Yukon onsite jobs are typically scheduled within 24-48 hours once vehicle readiness, access, and route timing are confirmed. This vehicle has roughly 20 programmable modules documented in our database (1 ECU, 1 BCM, 1 TCU, 3 ABS, plus IPC/SAS/gateway/accessory). Mobile module work and ADAS calibration are scheduled in the DFW service area after quote review. Mail-in module intake is temporarily unavailable.
Do you cover the 2007 GMC Yukon on-site, or is this mail-in only?
We run a mobile unit across the DFW Metroplex for on-vehicle work (ADAS calibration, key programming, IMMO pairing, post-repair recoding, and supported module work). Mail-in module intake is temporarily unavailable. Quote the work and we will confirm the active service path for the 2007 GMC Yukon. Do not ship a module unless support confirms next steps.
What kind of warranty do you offer on 2007 GMC Yukon programming?
Every programming, cloning, and calibration job on the 2007 GMC Yukon is backed by a workmanship warranty covering the scope of work we performed: 1-year unlimited on all flashes, clones, and ADAS calibrations. If a module we programmed or a calibration we performed fails to function as expected, return it and we restore it at no charge. The warranty covers our work; it does not cover unrelated mechanical or electrical failure of the module itself.
Can you program a 2007 GMC Yukon with no working keys (all-keys-lost)?
Yes - all-keys-lost is supported on the 2007 GMC Yukon. Immobilizer generation on this platform: PK3/PK3+ / PEPS. Adding a key (with a working key already in hand) is also supported - typically faster and less expensive than an all-keys-lost reset. Submit the VIN and we will confirm the procedure and quote before scheduling.
Which modules on a 2007 GMC Yukon can you actually service?
We program, clone, repair, or replace the full programmable-module stack on a 2007 GMC Yukon. For this vehicle our database documents:
1 engine control (ECU/PCM)
1 transmission control (TCU/TCM)
1 body control (BCM and related)
3 ABS / brake control (EBCM)
1 immobilizer / security
2 key & fob
2 steering angle sensor (SAS)
1 ADAS module
Send the VIN and the operations performed and we will confirm support and pricing.
Additional OEM-sourced part numbers for the 2007 GMC Yukon covering ADAS, ECU/PCM, BCM, TCU/TCM, SRS, ABS/EBCM, instrument cluster (IPC), gateway, and steering angle sensor modules when available. These reference numbers assist technicians with module identification and sourcing prior to programming.
Part numbers are OEM base references. Verify exact suffix via VIN-specific build data before ordering. Core Auto Logic provides mobile programming services for all listed modules in the DFW area.
Different trim or build?
Send your VIN and we'll confirm exact module support and pricing in the quote response.
The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.A compact version of the Core Auto Logic logo featuring a circular gear shape combined with a globe made of interconnected circuit lines, representing automotive electronics and advanced vehicle technology.The CORE Auto Logic logo features a stylized gear partially encircling a globe made of green interconnected circuit lines, representing automotive technology and electronic systems. The word "CORE" appears prominently in bold lettering, followed by "AUTO LOGIC" to the right, conveying a focus on advanced vehicle diagnostics, ADAS calibration, and module programming services.The Core Auto Logic logo features a stylized circular design combining a mechanical gear with a globe made of interconnected green circuit lines. The circuit pattern represents advanced automotive electronics, diagnostics, and networked vehicle systems. The word "CORE" appears prominently within the circular design, with "AUTO LOGIC" displayed to the right in bold lettering. The overall design reflects expertise in ADAS calibration, ECU programming, and modern vehicle technology services.